Bedienungsanleitung Karcher Audio DAB3000 (Seite 17 von 20) (Deutsch, Englisch)

733548

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

EN | 17

Station Order Change the order of the stations listed in the station list.

Equalizer Select between different equalizer presets.

Backlight Set the display backlight brightness (High / Medium / Low) in ON mode and

set the duration of timeout (time after which the display backlight will automatically

dim its brightness to a low level while in standby mode).

Time/Date Time and date are set automatically through DAB+ signal by default. If you wish to

set time and date manually, however, you can do so under this menu option.

Set Format: Select between 12 hour or 24 hour display mode.

Auto Update: Select whether time/date should be set automatically from DAB+ or

FM/RDS signal (suggested) or not (manual setting required).

Alarms Enter to set the alarm(s).

Alarm Mode: Select between Off/Daily/Once/Weekends/Weekdays.

Alarm Time: Set the desired alarm time.

Alarm Sound: Select between Buzzer, DAB or FM for wake up source.

Alarm Volume: Set the desired alarm volume.

Press BACK to save the alarm setting. The display will show a clock icon.

To turn off an active alarm, press the

or ALARM button.

Snooze: When you press any button (except ) during an active alarm, it will

activate the snooze function. Rotate the NAVIGATION knob to select a snooze

duration (5, 10, 15, or 30 minutes) after which the alarm will sound again.

To cancel the snooze function and stop the alarm, press .

Sleep The sleep function enables you to set a timer after which the unit will turn itself into

standby mode automatically. Select the desired time under this menu option.

Factory Reset Select to reset the unit to its factory settings. All user settings will be lost!

Info View the version of the rmware.

Language Select OSD menu language.

6. DAB+

1. Switch the unit on as described previously. It will start in the mode last listened to. Select DAB+

mode if it isn’t already selected.

2. A full scan for available stations will be done when you switch into DAB+ mode for the rst time. A

full scan can be done at any time in the menu.

3. You can select a desired station using the ▲/TUNING+ / ▼/TUNING- buttons and then pressing

OK.

Display

Content of the display depends on the broadcast of the radio station selected.

• Press the INFO button repeatedly to cycle through information broadcast by the selected radio

station, such as artist/track info, programme info, as well as frequency, signal strength, bite rate,

code, etc.

• If there is a picture shown from the radio station (slide) you can press OK to enlarge it to ll the

display. Press OK again to return to normal view.

Radio Station Presets

This unit enables you to store up to 10 of your favorite radio stations:

1. Select a radio station which you would like to store.

2. Press and hold for 2 seconds the PRESET button.

3. Select the preset no. on which the station should be stored using the ▲/TUNING+ / ▼/TUNING-

buttons or the NAVIGATE knob on the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio DAB3000 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info