Bedienungsanleitung Karcher Audio DAB4500CD (Seite 27 von 30) (Deutsch, Englisch)

733547

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

EN | 27

CD Player

Playing Discs

1. Switch the unit on and select the CD mode by pressing the Source button repeatedly.

2. Open the CD drawer by pressing the

Open/Close button. Insert a disc with the printed side

facing up.

3. Close the CD drawer by pressing the

Open/Close button once again. The CD is being read

and the total number of tracks will then be shown in the display.

4. Playback starts automatically with the rst track.

5. To temporarily stop the playback (pause), press the Play/Pause button once. Press the button

again to resume playback.

6. To stop playback, press the Stop button.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the beginning of the currently playing track, press the button once. Press it a sec-

ond time to skip to the previous track.

• To skip to the next track, press the button once.

• To fast forward the currently playing track, press and hold the button. Once you reach the

desired section of the track, release the button to resume normal playback.

• To fast rewind the currently playing track, press and hold the button. Once you reach the

desired section of the track, release the button to resume normal playback.

• To skip forward/back 10 tracks at once, press the 10+ or 10- button.

Repeat / Random Modes

At any time during playback press the Repeat button on the remote control repeatedly to select be-

tween

• Repeat Track - the current track will be repeated, the display will show “REP”.

• Repeat Album (if the CD or USB contains albums) - the current album will be repeated, the dis-

play will show “REP”.

• Repeat All - All tracks on the CD or USB will be repeated, the display will show “REP ALL”.

• Random Playback - All tracks will be played in random order, the display will show “SHUF”.

Notes:

• To disable the Random and Repeat functions, press the according Repeat button repeatedly until

“REP OFF” is shown.

Intro Mode

To play only the rst 10 seconds of each song, press the Intro button on the remote control. To disable

this feature, press the Intro button once again.

Programming Track Order

You can store up to 20 tracks in a desired sequence.

1. While in CD stop mode, press the Prog button. “001” and “PR01” will be shown in the display.

2. Using the / buttons, select the track to be played rst in the sequence.

If the disc contains several albums, select the album rst using the Fold-/+ buttons, followed by

the track.

3. Press the Prog button again. “PR02” will be ashing in the display.

4. Repeat the steps 2 - 3 to select up to 20 tracks for your sequence.

5. Press the Play/Pause button to start the playback of your sequence.

6. To stop playback, press the Stop button. To delete your sequence press this button a second

time.

ID3 Tags

When the les on the inserted disc are equipped with ID3 tags (artist, track and album names) these

will be shown in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio DAB4500CD Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info