Bedienungsanleitung Kemper TC-400 (Seite 12 von 15) (Englisch, Französisch, Italienisch)

778308

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

TC-400

DT Istr (TC-400) 05/17_Rev.1_05/18 12/15

ASSEMBLING THE APPLIANCE

Before using the appliance, fix its feet (included separately in the box) to the

appliance. The feet must be fixed to the appliance base using the 4 self-threading

screws supplied, making sure they are correctly placed in their corresponding

positions on the bottom of the appliance.

SETTING THE APPLIANCE AT WORK

NOTE: When the appliance is set at work for the first time or after long periods of inactivity, it could give a slight

smell. This smell will disappear a little while after turning it on.

1. Turn the rotary knob (4) clockwise as far as it will go.

2. Wait until the heater has warmed up the room to a suitable temperature and then turn the knob back slowly

until the control lamp goes out.

3. The thermostat is now set at he right temperature and will turn ON when temperature goes below this point,

or OFF when above.

FROST GUARD FUNCTION

By setting the rotary knob to the snowflake symbol , the frost guard will automatically turn on at approximately

+2℃ and protect against frost.

To ensure safe use, the device is equipped with a safety system that automatically switches off the heater when it

is overheated. In this case, disconnect the appliance from the power supply, wait for a few minutes, reconnect it

to the power supply and turn it on again.

CLEANING THE APPLIANCE

Before cleaning the appliance, make sure that the power plug has been disconnected from the mains socket and

let the appliance cool down.

Clean the external part of the appliance using a damp cloth, and dry it using a dry cloth.

Do not use any detergent or abrasive product, and make sure that no water flows inside the appliance.

APPLIANCE PRESERVATION

Do not throw the box, use it to store the equipment. When you don’t use the appliance, store it in its original

packaging to protect from dust and store in a dry and clean place.

Model: TC-400

Item

Symbol

Value

Unit

Item

Unit

Heat output

Type of heat input, for electric storage local space heaters

only (select one)

Nominal heat output

Pnom.

0,45

manual heat charge control, with integrated thermostat

Minimum heat output

(indicative)

Pmin.

manual heat charge control with room and/or outdoor

temperature feedback

Maximum continuous

heat output

Pmax,c

0,45

electronic heat charge control with room and/or

outdoor temperature feedback

Auxiliary electricity

consumption

fan assisted heat output

At nominal heat

output

elmax

Type of heat output/room temperature control (select

one)

At minimum heat

output

elmin

single stage heat output and no room temperature

control

In standby mode

elSB

Two or more manual stages, no room temperature

control

with mechanic thermostat room temperature control

YES

with electronic room temperature control

electronic room temperature control plus day timer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemper TC-400 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info