Bedienungsanleitung Kenwood C-BX3 (Seite 9 von 12) (Englisch)

511254

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

English

When one of the situations occurs...

The APS indicator is shown for 1 second every 1 minute and starts

flashing 30 seconds before the System turns off.

Selecting the input source

Press one of the input buttons (DIGITAL1, DIGITAL2,

ANALOG) to select the input source.

DIGITAL1 (for the optical connection)•

DIGITAL2 (for the coaxial connection)•

ANALOG (for the analog connection)•

Adjusting the volume

Press VOLUME +/–.

Adjusts the volume within the range of 0 (MIN) to 40 (MAX).

¤ CAUTION

Set the volume to the minimum level before starting any source. If the

volume is set to a high level, the sudden blast of sound may damage your

hearing and blow out the speakers.

Turning off the sound temporarily

Press MUTING.

To restore the sound, press the button again or press VOLUME + to •

adjust the volume.

Maintaining steady volume level

You can set your desired volume level for different input sources to

avoid volume fluctuation when changing from one source to the

other—TruVolume (TVOL).

Press TVOL.

Each time you press the button, TruVolume is turn on and off (TVOL ON

and TVOL OFF scroll on the display).

Changing the display brightness

Press DIMMER.

Each time you press the button, the display brightness changes with the

following scrolling message:

DIMMER OFF (normal) \ DIMMER 1 (darker) \ DIMMER 2 (darkest)

Adjusting the sound level

You can adjust the bass and treble sound level within the range of –3

to +3.

1 Press BASS/TREBLE repeatedly to select the sound you

want to adjust.

Each time you press the button, BASS and TREBLE alternates on the

display.

– BASS: Adjusts the bass sound level.

– TREBLE: Adjusts the treble sound level.

2 Press UP or DOWN to adjust the level.

⁄

The change in the bass and treble sound level of the speakers differ

depending on the incoming signal of the input source.

Using the surround mode

You can listen to a more realistic sound than stereo sound using

surround—StudioSound HD (SSHD).

Press SSHD.

Each time you press the button, surround mode is toggled on or off

(SSHD ON or SSHD OFF scrolls on the display).

Playing back iPod

Connecting iPod

While the power of the main unit is turned off...

1 Push the tray (8) to open the dock for iPod.

2 Connect iPod to the connector.

You cannot connect iPod to the unit if it is covered by something or •

with accessories attached. Remove them before connecting.

Keep iPod in a straight position while connecting/disconnecting it.•

Do not carry the unit with iPod connected. It might cause damage to •

the dock for iPod or you might drop iPod.

Do not touch or hit the iPod terminal pins or connector pins in the •

dock for iPod directly. Doing so might cause damage to the connector

pins.

While the power is turned on, iPod can be charged.•

Playing back

Press iPod 6.

While the power is turned off, simply pressing iPod • 6 turns on

the power and plays back iPod.

iPod (not supplied)

EN_C-BX3[E]f.indd 9EN_C-BX3[E]f.indd 9 7/4/12 9:44:42 AM7/4/12 9:44:42 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood C-BX3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood C-BX3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info