Bedienungsanleitung Kenwood xd 803 8 (Seite 60 von 64) (Englisch, Holländisch)

159529

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Knowledge section

In case of difficulty

÷ Clean the head referring to “Mainte-

nance”.

÷ Try another tape.

÷ Switch off the equalizer and

surround effects before starting

playback.

÷ Demagnetize the head referring to

“Maintenance”.

÷ Install the system at a distance from

other electric appliances and TV.

÷ Switch on the Tape Equalizer.

÷ Clean the head referring to “Mainte-

nance”.

÷ Wind the tape again by fast forward-

ing, rewinding or playing from an end

to the other.

÷ Use a cassette with an unbroken re-

cording protect tab or block the hole.

÷ Close the holder completely.

÷ Select the source to be recorded with

the CD, TUNER, or AUX key.

÷ Change the tape transport direction of

deck B or reverse the tape insertion

orientation.

Sound is harsh or high fre-

quencies are not repro-

duced.

Sound is distorted.

Noise is noticeable.

Sound vibrates.

Recording cannot be started

by pressing the record key.

RemedySymptom Cause

A CD is placed in the player

but it cannot be played.

Sound is not produced.

Sound skips.

÷ The disc is placed upside down.

÷ The disc position is displaced.

÷ The disc is extremely dirty.

÷ The disc is scratched.

÷ Dew is condensed on the optics lens.

÷ The disc has not been placed.

÷ The player is not set to the play mode.

÷ The disc is extremely dirty.

÷ The disc is scratched.

÷ The disc is dirty.

÷ The disc is scratched.

÷ The player was subjected to vibration.

÷ Place the disc properly, with the label

side facing upward.

÷ Place the disc properly.

÷ Clean the disc referring to “Handling

of discs and tapes”.

÷ Try another disc.

÷ Refer to “Caution on condensation”

and remove the condensation by

evaporation.

÷ Place a disc in the CD player.

÷ Press the play key.

÷ Clean the disc referring to “Handling

of discs and tapes”.

÷ Try another disc.

÷ Clean the disc referring to “Handling

of discs and tapes”.

÷ Try another disc.

÷ Install the unit in a place not subject to

vibrations.

CD player

÷ The head is dirty.

÷ The tape is stretched or shrunk.

÷ The tape being played was recorded

with distorted sound.

÷ A tape which has been recorded with

the equalizer and/or surround effects is

being played back by applying the

equalizer effect.

÷ The tape head is magnetized.

÷ External noise is induced.

÷ A tape which has been recorded with

Dolby NR is being played back with-

out switching the Tape Equalizer.

÷ The capstans or pinch rollers are dirty.

÷ The tape is wound irregularly.

÷ The recording protect tab of the cas-

sette has been broken.

÷ The cassette holder is not closed com-

pletely.

÷ The TAPE input is selected.

÷ The tape is fully wound to one of the

reels.

™

•

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood xd 803 8 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info