620514
32
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
32
Use as designated
This machine is only
determined for sharpening saw chains. Before commissioning the device must be fixed to a workbench or an
other similar surface. Use the chainsaw sharpener only if you fully appreciate all the functions and perform without restrictions or have
received appropriate instructions.
This machine must not be used for any works other than for which the machine has been designed and that are specified in the
Operating Instructions.
Any other use will be considered a use in conflict with the designation. The manufacturer will not be liable for any consequential
damage or injuries. Please be sure to know that the machine has not been designed for industrial purposes.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard Description Protective Action Residual Hazard
Incision, cutting Teeth of the saw chain may
cause incisions .
Always wear protection gloves
when working with the unit
Catching, winding up Loosely-fitting clothes any
jewellery may be caught by
rotating parts .
Always wear tightly fitting
clothes and avoid any jewels
that could be caught .
Nick, scrape A contact with the rotating
grinding disc may result in
severe injury
Never touch the grinding disc
while in motion .
Electrical Residual Hazards
Hazard Description Protective action Residual Hazard
Direct electrical contact Defective cables or plugs may
cause electrical shock.
Always have the defective
cables or plugs replaced by a
professional. Do not use the
unit unless with stray current
protection (FI)
Noise Hazard
Hazard Description Protective action Residual Hazard
Hearing impairment Prolonged work with unit may
result in hearing impairment.
Wear ear protectors.
Material and Other Substances Hazards
Hazard Description Protective action Residual hazard
Contact, breathing in Dust nuisance may cause
impairment of lungs .
Filter respirator is
recommended
Fire or explosion Metal grinding produces
sparkles and the easily ignitable
substance/petrol) may ignite.
Do not use the unit close to
easily inflammable substances
Human Factors Neglect
Hazard Description Protective action Residual hazard
Insufficient local lighting Insufficient lighting produces a
high safety hazard.
Provide for sufficient lighting
when working with the unit.
Other Hazards
Hazard Description Protective action Residual hazard
Breakage in operation Defective grinding discs may
break in operation and cause a
severe injury to the operator
Check the grinding disc for
defects on a regular basis.
Avoid any use of a defective
disc. Always wear protective
clothing in conformity with the
job.
Rejected objects or fluids Fragments of the disc may
cause an injury of your eyes
Always wear protective goggles
when working on the unit.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kraft GKS 108 - 05165 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info