Bedienungsanleitung Kuppersbusch EEB 6850.0 MX (Seite 5 von 26) (Englisch)

677128

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EEB 6850.8

Touch the symbol. This will light

up in red.

By turning the function selector you

can see the clock functions.

When you have the chosen the time

setting function , press the function

selector .

You will then see the current time on the

display.

Select the time by turning the function

selector. Next, press the function

selector to conﬁ rm and you will hear a

beep.

Select the minutes by turning the function selector. Next, press the

function selector to conﬁ rm and you will hear a beep.

You will then hear a double beep conﬁ rming the time is set.

First cleaning

– Remove packaging and accessories from the oven.

– The appliance must be cleaned before preparing food in it for the ﬁ rst

time.

Clean the oven interior, oven trays, grease tray, grid shelf etc. with a

damp cloth and a little dishwashing detergent.

– Heat the oven.

Close the oven door.

Heat the oven to 200°C with top and bottom heat

for 60 minutes.

Ensure the kitchen is well ventilated while doing this.

General oven information

General advice

Follow the safety warnings given previously!

Caution, Danger of overheating! When using the oven, do not cover

the bottom with aluminium foil or place pots, frying pans or the like

inside. If this happens, the oven will overheat, causing damage to the

enamel.

The oven becomes hot when in use. The cooling fan turns on when

the oven overheats. The cooling fan will remain on until the oven has

cooled down, even after the appliance has been turned off. The noises

made by the fan are normal and do not mean that it is damaged.

When preparing a dish with alcohol or yeast with settings that use hot

air, there may be a vinegary smell. If the smell is unpleasant, use a

function that does not include the fan, such as top/bottom heat.

The electronic clock features Touch-Control technology. To operate,

simply touch the glass control symbols with your ﬁ ngertip. The touch

control sensitivity continuously adapts to changing conditions. Make

sure that the glass surface of the control panel is clean and free of any

obstacles when turning on the oven.

If the clock does not respond correctly when you touch the glass,

you will need to turn off the oven for a few seconds and then turn it

back on after a few seconds. Doing this causes the sensors to adjust

automatically so that they will react once more to ﬁ ngertip control.

Shelf levels

There are 5 shelf runners

on the sides. The shelf

levels are numbered 1 to 5

from the bottom up.

Shelf runners

Shelf level 1 is the lowest shelf.

Turning the oven light on and off

The inside light will go on:

When the oven door is open. If the door is not closed after a certain

amount of time, the light will turn off to reduce power consumption.

When any cooking function is set. The light will turn off after a certain

time.

If you want to turn the light on during cooking, just press the function

selector. If you keep your ﬁ nger on the function selector for a few

seconds, the light will stay on throughout cooking. Press the function

selector to turn off the light.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kuppersbusch EEB 6850.0 MX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kuppersbusch EEB 6850.0 MX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info