Bedienungsanleitung La Crosse WS9057 (Seite 3 von 15) (Englisch)

606456

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is

because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the

Weather station in the first 3 minutes of power being supplied to it

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to an authorized depot.

SETTING UP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro outdoor

transmitter” above).

2. Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install and replace

batteries in the Weather Station” above). Once the batteries are in place, all segments of the LCD will light up briefly and a

short signal tone will sound. Following the indoor temperature/humidity and the time as 0:00 will be displayed. If these

information are not displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before

reinserting them. Once the indoor data is displayed user may proceed to the next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The outdoor

temperature and humidity data should then be displayed on the Weather station. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the transmitter

should not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”).

Note: In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts. Always wait at least 1

minute after removing the batteries before reinserting, otherwise start up and transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the batteries are in

place, all segments of the LCD will light up briefly and a short signal tine will sound. Following the indoor temperature/humidity

and the time as 0:00 will be displayed. If these information are not displayed on the LCD after 60 seconds, remove the

batteries from both units and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity data from the first transmitter (channel 1) should then be displayed on the Weather

Station. Also, the signal reception icon will be displayed. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

5. Insert the batteries in the second transmitter as soon as the outdoor temperature and humidity readings from the first

transmitter are displayed on the Weather Station.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station displays the

information of the first transmitter.

6. The outdoor temperature and humidity from the second transmitter and the "channel 2" icon should then be displayed on the

Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from all the units and reset from

step 1.

7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather

Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will

shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Crosse WS9057 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info