Bedienungsanleitung Lancom 1906VA (Seite 1 von 1) (Englisch)

703321

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered

trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111655/0218

TECHNICAL DETAILS

MOUNTING AND CONNECTING THE DEVICE

*) The additional power LED statuses are displayed in 5-seconds rotation

if the device is congured to be managed by the LANCOM Management

Cloud.

This product contains separate open-source software components which are subject to their own licenses, in particular the

General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s WEBcong

interface under “Extras > License information“. If the respective license demands, the source les for the corresponding software

components will be made available on a download server upon request.

Please observe the following when setting up the device

A The mains plug of the device must be freely accessible.

A For devices to be operated on the desktop, please attach the adhesive rubber

footpads

A Do not rest any objects on top of the device and do not stack multiple devices

A Keep the ventilation slots on the side of the device clear of obstruction

A Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Pay attention to the “R” and “L” marks on the brackets for accurate mounting.

POWER

a c eb fd

a VPN

Off VPN connection inactive

Green, permanently VPN connection active

Green, ashing VPN connecting

e ISDN 1 (TE/NT) / ISDN 2 (NT)

Off Interface deactivated

Green, permanently D-channel active

Green, blinking ISDN connection active

Orange, blinking ISDN connecting

Green / orange, blinking

synchronously

ISDN hardware error

Orange, permanently Connection inactive

a POWER

Off Device switched off

Green, permanently* Device operational, resp. device paired /

claimed and LANCOM Management Cloud

(LMC) accessible

Green / red, blinking No password set. Without a password

the conguration data in the device is

unprotected.

Red, blinking Charge or time limit reached

1x green inverse blinking* Connection to the LMC active, pairing OK,

device not claimed

2x green inverse blinking* Pairing error, resp. LMC activation code not

available

3x green inverse blinking* LMC not accessible, resp. communication

error

c VDSL 1 / VDSL 2

Off Interface deactivated

Green, blinking DSL connecting

Green, permanently DSL connection active

Green, ickering DSL data transfer

Green / orange, ickering DSL transfer error

Green / orange, blinking

synchronously

DSL hardware error

Orange, blinking DSL training

Orange, permanently DSL sync

a VoIP

Off No SIP accounts dened or VCM is off

Green, permanently All dened and active SIP accounts

(outgoing) were successfully registered

Red, permanently Not all of the dened and active SIP accounts

were registered (possibly still in process)

Red or green, inverse

ashing

Number of currently used lines

(connecting or connected)

e ETH 1 - ETH 4

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data trafc

Green, ickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

d WAN 1 / WAN 2

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data trafc

Green, ickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

b RESET

Reset button short press > Restart the device

long press > Reset the device

Hardware

Power supply Internal power supply unit (100–240 V, 50-60 Hz)

Power consumption Max. 19 W

Environment Temperature range 0–40 °C, humidity 0–95 %; non-condensing

Housing Robust metal housing, 1 HU with mounting brackets for 19“ installation,

345 x 44 x 253 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

VDSL 1 / VDSL 2

A VDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a

A Compatible to VDSL2 from Deutsche Telekom AG

A VDSL2 vectoring as per ITU G.993.5

A ADSL conformity according to:

ADSL2+ over ISDN as per ITU G.992.5 Annex B /J with DPBO (over POTS: Annex A/Annex M),

ADSL2 over ISDN as per ITU G.992.3 Annex B (over POTS: Annex A/L),

ADSL over ISDN as per ITU G.992.1 Annex B (over POTS: Annex A)

A Supports just one virtual connection at a time in ATM (VPI-VCI pair) per modem

WAN 1 / WAN 2 WAN 1 SFP: Compatible with optional LANCOM SFP modules. Set as a WAN port ex-factory, can be

congured as a LAN port.

WAN 1 / WAN 2 TP: 10 / 100 / 1000 Base-TX, autosensing full duplex (WAN 1) / autosensing (WAN

2), auto node hub

ETH1 - ETH 4 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.

Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in

the LCOS conguration.

Analog 1 - Analog 4 Use the cables of your analog devices to connect them with the analog interfaces. If necessary, use

the enclosed adapters.

ISDN 1 / ISDN 2 ISDN 1: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS. According to the

settings, connect the light-blue ISDN cable either to the NTBA or the ISDN terminal device.

ISDN 2: Internal (NT) ISDN bus. Use the light-blue ISDN cable to connect the ISDN device to the ISDN

interface.

Cong (Com) / V.24 Serial conguration interface / COM-port: 9,600 - 115,200 baud

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM-port

server) or USB drives (FAT le system)

WAN protocols

VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-

1, RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and

IPv4/IPv6 dual stack session), IP(v6)oE (autoconguration, DHCPv6 or static)

ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

Declaration of Conformity

Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.lancom-systems.com/ce/

Package content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cables for over ISDN: 2 DSL cables for an IP-based line, 4.25 m; 1 ISDN cable, 3 m (light-blue connectors);

for over POTS: 2 DSL cables, 3 m (dark-blue connectors);

1 Ethernet cable, 3 m (kiwi colored connectors); 1 IEC power cord 230 V (not for WW devices)

Adapters 4 TAE adapters (RJ11 - TAE)

Mounting brackets Two 19” brackets for rack mounting

VDSL / ADSL interfaces*

If required, use the supplied DSL cables for the IP-based line to con-

nect each VDSL / ADSL interface to a separate provider’s telephone

socket. For more information, please contact your Internet service

provider.

*For operation with over POTS devices please use the enclosed DSL

cables with the dark blue plugs.

WAN 1 interfaces (SFP / TP combo port)

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

If desired, alternatively connect the WAN 1 TP interface to a WAN

modem using an ethernet cable.

WAN 2 interface (TP)

Connect the WAN 2 interface to a WAN modem using an Ethernet

cable.

Ethernet interface

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

Analog interfaces

Connect analog terminal devices to the analog interfaces either

directly via RJ11 or with the help of the enclosed TAE adapters.

ISDN interfaces

ISDN 1: Internal (NT) or external (TE) ISDN bus.

This feature is controlled by LCOS.

ISDN 2: Internal (NT) ISDN-bus.

A 100-Ohm resistor for line termination is

switchable in LCOS.

Conguration interface

Use the included serial conguration cable to connect the serial

interface (COM) to the serial interface of the device you want to

use for conguring / monitoring.

USB interface

You can use the USB interface to connect a USB printer or a

USB storage device.

Power connector and grounding point (device back side)

Supply power to the device via the power connector. Please

use the IEC power cable supplied (separately available for WW

devices).

ATTENTION: High touch current possible! Connect to earth

before connecting the power supply.

Warning! High touch current.

Connect to earth before

connecting the power supply.

LANCOM 1906VA

Quick Reference Guide

Cloud-ready

Lancom 1906VA Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1906VA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info