Bedienungsanleitung Lavazza LB2300 (Seite 16 von 21) (Englisch)

495524

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Installation of the machine - Service Provider Manual

- be used if damaged;

- be handled with damp or wet hands;

- be wound in a coil when the machine is in use.

- be tampered with.

• It is forbidden to:

- Install the machine other than as described in

Chapter 10, or outdoors.

- Install the machine in a location where water

jets may be used.

- Disable the security measures installed by the

manufacturer.

- Use the machine in proximity to ﬂ ammable and/

or explosive materials.

- Leave plastic bags, polystyrene, nails, etc within

the reach of children, as they are potential ha-

zards.

- Allow children to play near the machine.

- Use replacement parts other than those recom-

mended by the manufacturer.

- Make any technical modiﬁ cations to the machi-

ne.

- Immerse the machine in any kind of liquid.

- Wash the machine using a jet of water.

- Use the machine in any manner other than as

described in this manual.

- Install the machine on top of other appliances.

- Use the machine in explosive or harsh environ-

ments, or with high concentrations of dust or

oily substances suspended in the air;

- Use the machine in an environment where there

is a risk of ﬁ re;

- Use the machine to dispense products other

than those it is designed for.

• Before cleaning the machine, ensure the plug is

disconnected from the power socket; do not wash

it with fuel and/or solvents of any kind.

• Do not place the machine near heating equipment

(such as stoves or radiators).

• In case of ﬁ re, use carbon dioxide (CO

) extin-

guishers. Do not use water or dry powder extin-

guishers.

10.2 Stop functions

The machine is stopped using the power button.

10.3 List of accessories supplied

Manual: Instructions for using the machine.

Water hardness test: quick test to determine the

hardness of the water used to prepare beverages; this

test is of fundamental importance, in order to set the

hardness of the water used by the machine.

Key for the water tank and the access door to the

service compartment: this prevents access to the wa-

ter tank and brew unit by unauthorised personnel.

Water network pipe (only for certain models with

water network): establishes the connection between

the machine and the drinking water network (see sec-

tion 10.7).

10.4 Assembly-Siting

The machine must not be installed outdoors

or in environments in which jets of water or

steam are used.

The presence of magnetic ﬁ elds or proxi-

mity to electrical machines which generate

disturbances could cause the electronic controls of

the machine to malfunction.

Important.

At temperatures close to 0°C, internal parts

containing water are at risk of freezing. Do not use

the machine under these conditions.

To ensure correct and efﬁ cient performance of the ap-

pliance, comply with the following recommendations:

• maximum humidity: 90%.

• the site should be suitably prepared for the installa-

tion of the machine;

• the surface on which the machine is installed should

be level, solid and stable, with a gradient no greater

than 2°;

• the location should be adequately lit, ventilated and

clean, and the power socket should be easily ac-

cessible.

Access to the machine and the plug should

be kept clear at all times, in order to allow

users to easily reach them and to leave the area

immediately if required.

The following illustration shows the required access

distances:

• to the keypad on the front of the appliance

• to the service units in the event of malfunction.

200

100

200

400

After placing the packing container near the installation

site, proceed as follows:

• ensure that the container has not been tampered

with during transport and that the original packaging

is intact and closed;

• open the container;

• check the condition and model of the machine;

• check the contents of the accessories bag enclo-

sed with the machine (see “10.3 List of accessories

supplied”);

• remove the machine from its original packaging;

• remove any remaining packaging from the machi-

ne;

• lift the machine and place it in the designated

area.

10.5 Disposal of packaging

After the packing container is opened, it is recommen-

ded that the packaging materials are separated accor-

ding to type and disposed of in accordance with the

regulations in force in the country of use.

We recommend keeping the container for

future transfers or transportation.

10.6 Electrical connection

This operation should only be performed

by specialist technical personnel or by the

service provider.

The machine is designed to work with single-phase vol-

tage matching the rating on the identiﬁ cation plate (1.4

Machine identiﬁ cation).

Before plugging in the machine, make sure that the

power button is switched to “0”.

The Service Provider makes and is responsible for the

electrical connection of the machine.

The machine should be connected to the mains using

the plug installed on the power cord, in accordance

with:

• Laws and Regulations in force in the place and at

the time of installation;

• The information shown on the technical speciﬁ ca-

tions plate on the side of the machine.

Warning: the electric socket which the ap-

pliance is connected to must be easily ac-

cessible by the user, in order to allow it to be easily

disconnected from the mains when necessary.

It is forbidden to:

• Use extensions of any kind.

• Replace the original plug.

• Use adaptors.

10.7 Water connection (only for models

with water network)

This connection is only required for machi-

nes ﬁ tted with a water network connector.

This operation should only be performed

by specialist technical personnel or by the

service provider.

The machine is designed for use with the drinking wa-

ter network.

Before connecting the supply pipe to the

water network, allow the water to run until

it is clear.

The distance between the supply for the

electrical connection and the water connec-

tion should respect the regulations in force at the

time of installation.

sizes in millimeter

• 16 •

Lavazza LB2300 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info