Bedienungsanleitung Lavazza LB2300 (Seite 17 von 21) (Englisch)

495524

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Installation of the machine - Service Provider Manual

ENGLISH

1. Remove the protective cap of the water inlet.

2. Connect the supply pipe to the machine, screwing

it onto the water inlet located at the rear of the ap-

pliance in the upper right-hand corner (see illustra-

tion).

3. Screw the supply pipe to a cold water tap with a 3/4

gas threaded spout (see illustration).

4. Ensure that the pipe is free of kinks and twists.

The water pressure of the tap should be wi-

thin the limits shown in the Technical spe-

ciﬁ cations table. If the length of the supply pipe

is insufﬁ cient, contact a specialised retailer or an

authorised technician.

Never use used or old supply pipes; use only those

supplied with the machine.

10.8 Setting the water hardness

This function allows the hardness of the water used to

be set, enabling the machine to indicate the appropriate

timings for the descaling cycle.

Warning. To set the water hardness, careful-

ly read the contents of Chapter 11.

The hardness of tap water varies from region to re-

gion.

For this reason, the appliance can be set according to

the hardness of the water in the region where it is to be

used, expressed on a scale of 0 to 4.

By default, the appliance is set to a standard value

(hardness 3).

The water hardness setting should be adjusted accor-

ding to the limescale content and hardness of the water,

measured using the strip supplied with the machine.

Brieﬂ y immerse the strip (for 1 second) in the water,

and shake gently. After one minute the test results can

be read on the strip.

Sehr weiches Wasser

Weiches Wasser

Mittleres Wasser

Hartes Wasser

HARDNESS 4

HARDNESS 3

HARDNESS 2

HARDNESS 1

HARDNESS 4 (hard)

HARDNESS 3 (medium)

HARDNESS 2 (soft)

HARDNESS 1 (very soft)

HARDNESS 0 (descaling checks disabled)

After performing the test, enter the appropriate value

into the machine.

10.9 Descaling ﬁ lter (BRITA)

To brew a perfect coffee, water is an essential ingre-

dient, no less important than the correct roast level of

the coffee. It should always be clear and fresh.

Thanks to its revolutionary technology, the descaling ﬁ l-

ter puriﬁ es tap water, eliminating all harmful substances

without removing important minerals.

The descaling ﬁ lter should be replaced whe-

never indicated by the machine.

Before descaling, the descaling ﬁ lter should

be removed from the water tank.

For correct installation of the descaling ﬁ lter, please

follow the indications on the packaging of the ﬁ lter.

The ﬁ lter should then be washed.

Access the service menu as described in section 11.1

and view the ﬁ lter washing menu.

2.6

Filter cleaning

Using the appropriate controls, select “Yes” to wash

the ﬁ lter.

2.6

Filter cleaning

Yes

Note: the wash cycle cannot and should not

be interrupted.

The display shows:

Filter cleaning

Empty

cof.groun.drawer

Empty the coffee grounds drawer of any liquids. When

removing the drawer, the display shows:

Filter cleaning

in progress

Insert

cof.groun.drawer

WARNING: reinsert the coffee grounds dra-

wer only after emptying it of any liquids.

When the coffee grounds drawer is inserted, the machi-

ne will start dispensing water into the drawer in order to

wash the ﬁ lter. The display shows:

Filter cleaning

in progress

Wait please…

The machine dispenses a preset amount of water

for appropriate washing of the new descaling filter.

When the machine has finished washing the filter,

the display shows:

Filter cleaning

Empty

cof.groun.drawer

Empty the coffee grounds drawer of any liquids. When

removing the drawer, the display shows:

Filter cleaning

in progress

Insert

cof.groun.drawer

When the coffee grounds drawer is inserted, the ma-

chine will starts up automatically. When warm-up and

rinse cycle are complete, the display shows:

Lavazza

Ready

Insert capsule

The machine is now ready to be used.

Note: the machine should be set to the wa-

ter hardness level immediately below the

result of the test; if three squares change colour,

set the machine to water hardness 2.

• 17 •

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lavazza LB2300 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info