Bedienungsanleitung Lenco cr 334 (Seite 6 von 13) (Englisch)

455819

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Summertime and Leap-year Adjustments

All Daylight Saving and Leap Year adjustments are made automatically by the automatic time

setting

internal computer as follows:

• Start of summertime:

At 1:59.59 AM on the last Sunday of daylight saving time, the clock will automatically

advance to 3:00 AM.

• End of summertime:

At 2:59.59 AM on the last Sunday of daylight saving time, the clock will automatically reset to

2:00 AM.

• Leap-year:

At 12:00 Midnight on February 28th, the calendar display will change to “29.02”.

Manual Time Adjustments

Some people like to set their clocks 5 to 10 minutes later than actual time to make sure that they

will always be on time. Even though the automatic time setting system

sets the time by itself, you

still have the option of adjusting the time manually if you wish.

To manually adjust the time display depress and hold the TIME button, and press either the SET <

or > buttons to adjust the time display ahead or back as desired.

Each press of the SET < or > buttons will change the display by one minute. If you hold the SET <

or > buttons the display will continue to change. The display will change slowly at first, one minute

at a time. But if you continue holding the SET < or > buttons the display will change rapidly.

NOTE: If you manually adjust the time, your new setting is entered into the automatic time setting

system memory. If the power is interrupted, the display will return to your new setting, not the

original setting, when the power is restored.

Adjusting The Wake Up Times

Your automatic time setting

clock radio has two separate alarms that can be set and used

independently. You may use the alarms to wake two people at different times, or you may use one

alarm for weekdays and the other for weekend wake up times.

The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2.

1.) Press and hold either the ALARM 1 or ALARM 2 setting button.

The respective Alarm 1 or Alarm 2 time and “DAY OF WEEK” indicators will appear.

2.) While holding the ALARM 1 or ALARM 2 setting button, press either the SET < or > button

to move the alarm display ahead or back to your respective Alarm 1 or Alarm 2 desired wake up

time.

3.) When the desired wake up time appears on the display, release the SET < or > buttons.

4.) When the desired wake up time appears on the display, release the ALARM 1 or ALARM 2

setting buttons.

Selecting The Alarm Mode

Your automatic time setting

clock radio allows you to select from among three different alarm

operation modes for either alarm.

The alarm modes are:

• Everyday mode – the alarm will turn on all 7 days.

• Weekdays mode – the alarm will only turn on Monday through Friday;

• Weekends mode – the alarm will only turn on Saturday and Sunday;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco cr 334 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco cr 334

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info