Bedienungsanleitung Line 6 Helix Rack (Seite 7 von 62) (Englisch)

693632

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Helix Rack

1. Main Display This large color LCD is your window into the power of Helix.

2. Power Switch It's alive!

3. GUITAR IN Connect your primary guitar or bass guitar here. This jack provides

impedance selection and a switchable pad.

4. PRESET Turn this knob to select a preset. Press the knob to open the Setlist

menu. See "Selecting Presets and Setlists"

5. SAVE Press this button to rename and save changes to a preset.

6. PressthisbuttontodiveabitdeeperintoHelix,andyou'llndCommand

Center, Global EQ, Global Settings, and other menus.

7. If you ever get lost, press this button to return to the main Home screen.

8. Press this button once, or multiple times, to quickly jump to the tonestack

parameters (Gain, Bass, Mid, Treble, etc.) of any Amp+Cab, Amp, and Preamp

models in the current preset.

9. Joystick Move the joystick to navigate the main display. On the Home screen,

move the joystick to select a block. Press ACTION and move the joystick to move

the selected block. Turn the joystick to change the selected block’s model. Press

the joystick to open the model list. Yeah, the joystick does a lot.

10. BYPASS Pressthisbuttontoturntheselectedblockonando.

SHORTCUT: Press and hold BYPASS to turn Global EQ on ( icon ap-

pearsintheupperrightcorneroftheLCD)ando.

11. ACTION Press this button to open the action panel for the selected block

or screen. From the Home screen, the action panel lets you move, copy, paste,

and clear blocks. Other screens may have unique action panels; for example, the

Global Settings action panel lets you reset all global settings at once.

12. <PAGE/PAGE> If the selected block or item has more than one page of pa-

rameters, dots appear to the right of the item’s name. Press < PAGE or

PAGE > to view more parameters.

13. Knobs 1-6 Turn one of the six knobs below the main display to adjust the

parameter's value above; press the knob to reset the parameter's value. If a rect-

angular button appears above a knob, press the knob to engage its function.

SHORTCUT: For most time-based parameters such as delay time or modu-

lation speed, press the knob to toggle between setting the value in ms or Hz

and note divisions (1/4-note, dotted 1/8-note, etc.).

SHORTCUT: Controllers can be assigned to most parameters. Press and

hold a parameter’s knob to quickly jump to the "Controller Assign" page for

that parameter.

14. VOLUME Turn this knob to control the Helix main output volume.

15. PHONES Turn this knob to control volume from the PHONES output.

16. TAP/TUNER Press this button two or more times to set the Helix tempo. Press

and hold to open the "Tuner".

17. PHONES Out (12Ω) Connect stereo headphones here; turn the top panel

PHONES knob to adjust volume.

NOTE: Helix provides plenty of gain for high impedance headphones. With

lower impedance headphones, you may notice a bit of distortion if the

PHONES knob is turned all the way up. This is normal.

Helix Control

18. Main Display This 20-character LCD displays the current preset number and

name. Press and hold Footswitch 12 (TAP) to engage the tuner display on both

Helix Control and Helix Rack.

19. Scribble Strips The twelve LCD scribble strips tell each footswitch's cur-

rent assignment, so there are never any surprises during a show. If a particular

footswitch has more than one block or item assigned, the scribble strip may read

“MULTIPLE (X)," where X is the number of assignments. You can custom label

scribble strips - see "Customizing a Footswitch Label"

20. Footswitches The capacitive, touch-sensitive footswitches have colored

LED rings that tell you the current state of the assigned block or item. While in

Stomp footswitch mode, touch (but don't press) a footswitch to quickly select the

assigned block or item. Touch the switch repeatedly to cycle through multiple as-

signed items. See "Stomp Footswitch Mode"

SHORTCUT: While in Stomp footswitch mode, touch (but don’t press) a

footswitch for two seconds to assign that switch to the selected block.

SHORTCUT: While in Stomp footswitch mode, touch and hold (but don’t

press) two switches to swap the assignments between them (including any

custom scribble strip names or LED colors).

SHORTCUT:Touch(butdon’tpress)TAPtobrieydisplaythetempopanel.

Thisletsyouquicklyne-tunethecurrenttempowithoutnavigatingtothe

Global Settings > MIDI/Tempo menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Helix Rack Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Helix Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info