Bedienungsanleitung Line 6 Helix Rack (Seite 9 von 62) (Englisch)

693632

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Helix Rack

21. AUX IN (10kΩ) Connect a secondary, active-pickup equipped guitar or bass

here.

22. MIC IN Plug your microphone in here for processing your vocals or recording

to your computer via USB. This XLR jack provides 48V phantom power for studio

condensermicsandavariablelowcutlter.

23. SENDS/RETURNS 1-4 These 1/4” ins and outs can be used as FX loops for

inserting external stompboxes into your tone or as additional inputs and outputs

for connecting keyboards, drum machines, mixers, and other gear. See "Send/

Return"

24. Ground Lift Switch If you are experiencing hums and buzzes, press this

button in to eliminate ground loops between your equipment.

25. XLR OUT Use balanced XLR cables to connect to your studio gear or the

house mixer, PA or FRFR speaker(s) when playing live. When using a mono play-

back system, connect only the LEFT/MONO XLR jack.

IMPORTANT! Never connect Helix Rack's XLR outputs to a device whose

XLR inputs have 48V phantom power enabled!

26. 1/4” OUT Use unbalanced 1/4" TS cables to connect to your guitar amp, FRFR

speaker(s), studio monitors, or other playback system. When using a single amp

or speaker, connect only the LEFT/MONO 1/4” jack.

27. GUITAR THRU OUT Passes the signal received at the front panel Guitar In

with no A/D/A conversion.

28. AC In Connect Helix to a grounded AC power outlet.

29. Expression 1/2/3/Toe Switch Move a connected expression pedal to

controlvolume,wah,oracombinationofampand/oreectsparameters.(Option-

ally, expression pedals and a remote switch can be connected to Helix Control

- see item #44).

30. EXT AMP 1/2, CV/Expression Out Connect EXT AMP to your traditional

guitaramptoswitchitschannelsorturnitsreverbonando.UseaTRScablefor

dual operation (1=tip, 2=ring). Connect CV OUT to the expression pedal input on

stompboxes or CV (Control Voltage) input on vintage pedals or synths.

31. MIDI IN, OUT/THRU Connect Helix to your MIDI gear for sending and re-

ceiving program changes, continuous controllers, and other MIDI messages.

32. HELIX CONTROL Connect Helix Rack to Helix Control's HOST port via a

CAT-5 or Ethercon cable.

33. VARIAX Input Thisinputprovidespower,digitalaudio,eectscontrol,and

instant recall between Helix and a Line 6 Variax guitar. See "What is Variax?"

34. WORDCLOCK IN Receives a clock signal from an external audio interface or

digital mixer, synchronizing the Helix digital output to your system. If Helix is the

last device in your BNC wordclock chain, press the TERMINATOR switch in (ON).

35. S/PDIF IN/OUT Digitally connect Helix to your studio equipment via S/PDIF

(75-ohm RCA) cables.

36. AES/EBU IN Digitally connect Helix to your studio equipment via AES/EBU

(110ΩXLR)cables.

NOTE: S/PDIF and AES/EBU cannot be active at the same time. See "Global

Settings > Ins/Outs" on page 53 for more information.

37. AES/EBU OUT, L6 LINK L6 LINK provides easy digital audio connectiv-

itybetweenHelixandLine6StageSourcemonitorsand/orDT-Seriesampliers.

Alternatively, digitally connect Helix to your studio equipment via an AES/EBU

(110ΩXLR)cable.See"L6 LINK Output"

38. USB Helix also functions as a high quality, multi-in/out, 24-bit/96kHz audio

interface for Mac

and Windows

computers, with DI, Re-amping and MIDI func-

tionality built right in. Helix can also record to an Apple iPad (with optional Apple

Camera Connection Kit). Use of a USB 2.0 or 3.0 port is required - Do not use an

external USB hub. See "USB Audio"

Helix Control

39. POWER Switch If Helix Control is left switched on, you may switch both on

andofromHelixRack'spowerswitch.

40. DC Cable Tie Reserved for potential future use.

41. DC IN Reserved for potential future use; for very long cable lengths, use a Line

6 DC-3G adapter (purchased separately).

42. HOST Port Connect Helix Control to Helix Rack via a CAT-5 (included with

Helix Control) or Ethercon cable.

43. USB Reserved for potential future use.

44. Expression 1/2/3/Toe Switch Move a connected expression pedal to

controlvolume,wah,oracombinationofampand/oreectsparameters.

NOTE: Adding a Wah or Pitch Wham block automatically assigns it to EXP

1. Adding a Volume Pedal or Pan block automatically assigns it to EXP 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 Helix Rack Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 Helix Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info