3
Staubsauger
• Gerät ausschalten und abstecken.
• Die Abdeckung des Feinstaubsensors an der Seite des Geräts öffnen.
• Mit dem Staubsauger jeglichen Staub oder Schmutz, der sich im inneren der Kammer
angesammelt hat, aufsaugen.
AUST
Der L
gewechselt werden, leuchtet die Kontrollleuchte am Displa
erneuert und mit „RENEW“- T
des Kombi-Filters beträgt 3.000 Betriebsstunde.
• Sicherstellen, dass das Gerät ausgeschaltet und abgesteckt ist. Die vordere Abdeckung
am oberen Ende ziehen, nach unten klappen und abnehmen.
• Entnehmen Sie den Kombi-Filter inkl. dem waschbaren V
Schlaufe an der Oberseite des Filters.
• Entfernen Sie den waschbaren V
den neuen Kombifilter
• Setzen Sie den neuen Filter inkl. waschbaren V
• Um die vordere Abdeckung zu schließen, zuerst sicherstellen, dass die Hacken an der
unteren Seite richtig positioniert sind, bevor sie diese oben mit etwas Druck einrasten
lassen.
• Stecken Sie den Luftreiniger wieder an die Steckdosen an und schalten ihn ein. Drücken
Sie die „RENEW“ – T
„0“ zu setzen.
FEHLERBEHEBUNG
PROBLEM URSACHE LÖSUNG
Das Gerät
funktioniert nicht.
Der EIN/AUS-Knopf wurde nicht
gedrückt. Den EIN/AUS-Knopf drücken.
Das Gerät ist abgesteckt. Das Gerät anstecken.
Die vordere Abdeckung ist nicht
korrekt eingesetzt.
V
und ordentlich einrasten
V
L
schlechte Filterung
Das Ein-oder Auslassgitter ist
möglicherweise blockiert.
Sicherstellen, dass sich nichts
vor oder auf dem Gerä
Der Filter ist möglicherweise
verstopft.
Filter prüfen und wenn nötig
austauschen.
Die Filter sind möglicherweise noch
immer in der Plastikverpackung
Die Plastikverpackung
entfernen.
Hergestellt in China
EN
W
Reduce the risk of electric shock, injury or fire by
reading and following all warnings below
product only as described in this manual. Do not
service the product yourself
• Do not lay the pow
• Do not opera
product is not intended for filtering oil or grease from
ambient air
• Do not use the air purifier in ba
in other wet and humid environments
or areas where there may be flammable or combustible
vapours or products
• Alwa
the device is not in use, before cleaning
removing parts and before moving it to another loca
• Nev
• Alwa
unplugging
• Do not place the cord near hot surfaces.
• Nev
be damaged. Please contact customer service.
• Nev
purifier
• Do not pull the power cord around sharp corners or
edges. This can cause injury to the user or damage the
cord.
• T
itself and pull carefully
• Keep foreign objects, fingers and other parts of the body
hair
• Nev
• This unit may be used by children 8 y
or by persons with reduced ph
capacities or lack of experience and/or knowledge, only
if they ha
use of the unit and can understand the hazards arising
therefrom. Children should never be allow
the device. Cleaning and user maintenance must not be
performed by children unless they are ov
supervised. Children younger than
8 years of age are to be kept a
the connecting cable. Extreme caution is advised when
using the air purifier near children and when lea
una
• Please keep the device a
2 meters from televisions, radios and other electrical
devices.
• Please keep a distance of a
• Place the device in a room with good air circula
• Do not place the device near curtains.
WARNING
• The device is equipped with a fast rotating motor
this will damage the device or cause injury
• Before cleaning or changing the filter
from the mains. Do not rinse or soak the filters or other parts with water
is not washable. Please only replace it.
• Pre-filter - T
• HEPA filter - Remo
• The high-quality activated carbon filter removes V
reduces odours.
• UV light sterilization - The germicidal UV light is used to limit bacteria and viruses.
• The built-in ionizer releases the ideal concentration of negative ions to keep the air fresh.
• The device effectively removes smoke, pollen, dust, pet hair
from the air
USE OF THE AIR PURIFIER
Before using the device for the first time, take out the combi-filter and remove the plastic
packaging
mains. The device is now ready for use. Read the following instructions to choose the desired
settings.
AIR QUALITY CONTROL / PM2.5 DISPLAY (particulatema
The device is equipped with an air quality control that continuously monitors the
particulatematter content of the air in the room. The particula
shown as a qualitativ
the air quality in the room.
GREEN = No particulatematter pollution
ORANGE = Low particula
RED = Elevated particula
Y
adjusts the fan speed according to the air quality (particulatematter content) in the room.
CONTROL PANEL FIG
1. ON/ OFF
As soon as the power button is pressed, the air purifier starts and runs in automatic mode.
The ionizer and UV function (sterilizer) are activated.
2. Smart (automatic mode)
In smart mode, the air purifier automatically selects the fan speed and adjusts it to the
determined air quality (according to particulatematter content) of the room. If smart mode
is activated, this is indica
again deactivates smart mode.
3. Speed (fan speed)
Pressing the ‚Speed‘ button allows you to switch between three different fan speeds
selected speed is shown on the display
4. ION/UV
The ionizer and UV function (sterilizer) can both be deactivated and reactiv
ION/UV button. The display shows whether the functions are switched on or off
The ionizer and UV (sterilizer) functions can only be controlled separately via the remote
control.
5. Lock
Pressing the ‚Lock‘ button once locks the entire control panel. This can only be cancelled
by means of a long press of the ‚Lock‘ button, which enables all controls on the control
panel again. The status of the lock function is shown on the display
6. Sleep (sleep mode)
When the device is in sleep mode, the fan runs at low speed and only the sleep button and
the sleep symbol on the display light up, with no other symbols being illuminated. Press
any button to cancel sleep mode.
7. Timer
The timer function allows you to set the length of time (in hours) tha
should run before switching itself off
it. Press the button repeatedly to choose betw
8. Renew
By pressing the ‚Renew‘ button once, the number of operating hours of the current filter
are shown on the display for four seconds. The lifespan of a filter is limited. It should be
changed every 3,000 hours. When the filter is replaced, press and hold the ‚Renew‘ button
for three seconds to „reset“ the device (the operating time is reset to „0“)
9. Remote control
Press the buttons to operate the corresponding functions
function - it is only needed for the Deluxe version.
M19972_AirPurifier503_normal_Manual_A4_20200911_DR.indd 3M19972_AirPurifier503_normal_Manual_A4_20200911_DR.indd 3 15.09.20 13:2015.09.20 13:20
