Bedienungsanleitung Loewe Centros 1102 (Seite 30 von 70) (Englisch)

35837

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

- 30

Playing back a DVD or

video CD (VCD, SVCD)

Preparing for playback

Switch the television on and set the video source to

be the input that the DVD recorder has been con-

nected to or activate the “Control voltage“ option

for the television‘s AV input.

If you have connected the DVD recorder to an

audio system, switch on the audio system and, as

the source, set the input that the DVD recorder has

been connected to.

Press

on the unit to open the disc drawer.

Insert the disc that you have selected, with the

side that is to be played back face-down, in the

drawer.

Press

on the unit to close the disc drawer.

READING shows on the display while disc recog-

nition is in progress.

Play

When the disc has been recognised, playback

begins automatically (if it does not, start it manu-

ally

) and the menu on the disc will display

(or the ﬁ lm will start immediately if there is no such

menu). When the disc menu appears, proceed as

follows:

DVD: Use the     buttons to select the

title or chapter that you wish to see. Then press

OK to start playback.

VCD: Use the number buttons to select the track

you want.

The disc‘s menu options and its precise mode of

operation may differ from disc to disc. Follow the

instructions on each menu page.

Further information can be found from page 21.

Notes:

If the child lock is active and the DVD disc‘s se-

curity rating is higher than that of the child lock,

the four-digit password will need to be entered

(see “Ratings“ on page 23).

DVD‘s have a country code. The recorder will not

play a disc that has a country code which differs

from the country code stored in the unit. This

player has country code 2.

You can also switch Play back control - PBC (see

page 21) off from the main menu (OFF).

General functions

Note: Unless otherwise indicated, the remote

control is able to control the functions described.

The DVD recorder‘s own controls can also be used

to control certain functions.

Selecting a different TITLE

1/6

DVD Video VR

If there is more than one title on a disc,

you can switch to a different title as follows:

Press

twice and use  /  to select the

title‘s symbol. Then press the appropriate number

button (0-9) or  /  to select a title number.

After pressing OK,the title will play.

Selecting a different CHAPTER or

TRACK

4/26

1/4

DVD Video VR VCD

If a disc title has more than one chapter/track, you

can select a different chapter or track as follows:

During playback, press P+ or P- to go to the next

chapter or next track, or to go back to the start of

the current chapter or track.

Press P- twice to go back to the previous chap-

ter/track.

During playback, you can select a chapter or track

directly by pressing

twice. Then use  / 

to select the chapter symbol (or the track symbol

on a video CD). Then use the number buttons (0-9)

to input the chapter/track number or use  /  to

select it. When OK is pressed, the chapter will play.

Using DVDs and Video CDs

32122 DVD Rec_Centros_GB.indb 30 32122 DVD Rec_Centros_GB.indb 30 26.04.2005 11:23:3126.04.2005 11:23:31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Centros 1102 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Centros 1102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info