587003
4
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Page 1
1 Introduction
Thank you for purchasing the LT-MADI™! We are proud to provide you with a reliable,
professional-quality product for your digital audio requirements.
This manual provides basic information to help you get started. Additional information is
available via our web site and email support. Please refer to Section 12, Support, at the end of
this manual for support contact information.
The LT-MADI is a 64-channel LSlot interface that is designed to allow the Aurora professional
audio AD/DA converters to be used with MADI (Multichannel Audio Digital Interface)
compatible mixers, multi-track recorders and other audio devices. The LT-MADI features
coaxial and optical connections, allows synchronization to MADI input streams, and allows
daisy-chaining of LT-MADI equipped Auroras. Each LT-MADI card can be configured for 56 or
64 channel operation. Connections up to 100 meters with coaxial cable and 2000 meters with
fiber optic cable are supported.
2 Features
¾ Two BNC/Coaxial and Two SC-Type Optical connectors per card.
¾ Each LT-MADI card is capable of up to 64-channels of I/O at sample rates up to 48kHz, 32-
channels at 88.2/96kHz, and 16-channels at 176.4/192kHz.
¾ An Aurora 16 can be configured for 32-channel or 16-channel operation. In 32-channel
mode, all Analog AND AES/EBU channels can be routed to and from MADI I/O. In 16-
channel mode, Analog OR AES/EBU channels can be routed to and from MADI I/O. An
Aurora 8 will only operate in 16-channel mode, using 8 analog and 8 AES/EBU channels.
¾ Up to four Auroras can be daisy-chained together for a maximum of 64 channels of I/O.
¾ Lynx proprietary SynchroLock™ technology can be used to reduce jitter when Aurora is a
clock slave or to provide stable, low jitter clock to downstream devices. This is especially
important and highly recommended for MADI clocking due to its inherent high jitter level.
¾ Supports MADI 64-channel operation as well as legacy 56-channel operation.
¾ Routing and configuration options available via Aurora Remote Control software application.
¾ Supports Cable lengths up to 100 meters with coaxial, and up to 2000 meters with fiber optic
cable.
¾ Programmable firmware onboard allows field updates to expand device utility and features.
¾ Automatic Delay Compensation insures sample accuracy with multiple, daisy-chained
Auroras.
¾ Easily installed into Aurora.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx LT-Madi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info