587003
5
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Page 2
3 Before You Begin
We recommend that you read through the manual to acquire an overview of the installation
procedure and use of the LT-MADI. This manual will presume a working knowledge of the
Aurora converter. For additional information, please refer to the Aurora owner’s manual.
3.1 Contents
Verify that you received the following in the LT-MADI shipping carton:
LT-MADI card in cushioned antistatic bag
Warranty Registration Card
Lynx Installation CD
1
/
2
” Standoff Post
3.2 Optional Equipment
75-ohm Coaxial Cable with BNC connectors or Fiber optic cable for connection to MADI
devices.
3.3 Operation Requirements
The LT-MADI requires your Aurora converter to have Firmware Version 24 or above. This
should be verified prior to installing and configuring the LT-MADI card. To determine what
firmware revision your Aurora has, press the TRIM and POWER buttons at the same time with
the power to the Aurora off. If the LED flashes over the numbers 2 & 4 or above (i.e. 2 & 5, 3 &
1, etc.), then your unit is compatible with the LT-MADI. If pressing Power and Trim does not
cause any LEDs to flash, or causes a single number to flash, then your unit needs to be updated.
The Aurora firmware can be updated by a Windows PC or OSX Macintosh with a Lynx AES16
PCI audio interface installed, or via MIDI (note: firmware revision 13 or above is required for
MIDI programming). The Aurora firmware updater program is available for download from the
Lynx website at Support > Downloads. If your unit requires an AES16 to update because it has
firmware revision 12 or earlier, and you do not have access to one, there are two options for
customers within the USA and Canada:
Option 1: Send the Aurora and LT-MADI to Lynx Studio Technology in California. We
will update the Aurora, install the LT-MADI and do a full diagnostic test within one day
of receipt. It will be return shipped via 2-Day Air.
Option 2: Lynx Studio Technology will loan you an AES16 for updating the firmware in
your Aurora. For more information on the procedure and any questions, contact
support@lynxstudio.com or call 714-545-4700 extension 206.
If you are outside of the USA or Canada, please contact your local distributor for
additional firmware update options.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx LT-Madi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info