598787
2
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Technical data
UT 1401
Rated voltage:
110 V ~
230 V ~
110 V ~
Power input:
1050 W
1300 W
15
Rated speed:
I
II
0–250 rpm
0–450 rpm
0–
210 rpm
0–
480 rpm
Frequency: 50 Hz
Tool holder:
M 14
Safety class:
II
Safety degree:
IP 20
Weight according to EPTA
Procedure 01/2003:
5,5 kg
This manual shall be subject to modification without prior notice in the course of
developments and technical progress.
Note: The technical data may differ depending on the country.
Symbols
The following symbols are used for the equipment. It is important to know their
meaning before you use the tool.
Intended use
The mixer UT 1401 is used to stir and mix
prefab plaster, gypsum, lime, concrete
and other building materials of medium and high viscosity in batches up to 50 kg.
The diameter of the stirrers that are used should not exceed 140mm.
The mixer UT 1600
is designed for use in mixing material of high viscosity, such
as prefab mortar and plaster, cement, lime, concrete, quartz
-
screed, pastes, sealing compounds as well as gypsum and granulates in batches
up to 80 kg. The diameter of the
mixing agitators must not exceed a value of
180mm.
The user shall be responsible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
enclosed shall be observed.
ENGLISH
Read instructions
Work with concentration and care.
Keep your workplace clean and avoid hazardous situations.
Precautions shall be taken to protect operators.
Double protective insulation
UT 1600
110 V ~
230 V ~
00 W
1800 W
210 rpm
480 rpm
0–250 rpm
0–580 rpm
7,1 kg
This manual shall be subject to modification without prior notice in the course of
The following symbols are used for the equipment. It is important to know their
prefab plaster, gypsum, lime, concrete
and other building materials of medium and high viscosity in batches up to 50 kg.
The diameter of the stirrers that are used should not exceed 140mm.
is designed for use in mixing material of high viscosity, such
-
filled epoxy resins,
screed, pastes, sealing compounds as well as gypsum and granulates in batches
mixing agitators must not exceed a value of
The user shall be responsible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
Keep your workplace clean and avoid hazardous situations.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita UT 1600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info