Bedienungsanleitung Marmitek IRIX35 (Seite 7 von 8) (Englisch, Holländisch)

494327

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

By means of the next setup commands it is possible to program

the toggle mode when you are in the programming mode.

CHOOSE ACTION RESULT RESULT

Setting Setup Command Blink code LED flashes

including Address

)

No IR-toggle 2 x Bright 12 14 x

IR-toggle mode 2 x Dim 5 7 x

Bold is default setting. All settings can be programmed separately.

) The sum of the blinks of the letter code and the setup command.

3. If you wish to program the IR-toggle mode please send a

"DIM" command to the IRIX35, through the power line by an

X-10 compatible transmitter to the IRIX35. (E.g. Marmitek

Home Control Box or Programming Unit (

PRU256

)).

4. Shortly press the programming switch or wait 60 seconds to

leave the programming mode and return to the normal

operation mode.

Note: The IRIX35 will only transmit the

programmed letter code of the IRIX35.

Independently of the letter code setting of the

remote control.

Programming the IRIX35 (cont'd.)

Auto detect the state of the two-way Marmitek X-10

modules

In the IR-toggle mode the IRIX35 operates with two-way

communication. This means that, when you activate the IRIX35

for the first time, the IRIX35 needs to detect the actual status

(ON or OFF) of all 16 installed modules in the same letter code.

The IRIX35 also needs to detect if the module reacts to group

commands. This scan can automatically be processed when you

activate the learn mode.

Address Learn Mode

The learn mode can be enabled by pressing the program button

between 6…9 seconds (LED blinks slowly, flash 5 x every

2 seconds).

Note: This mode must be entered only, if the IRIX35

is programmed in "IR-toggle mode"!

In learn mode the IRIX35 will transmit several commands to see

which external addresses (within the programmed letter code)

will respond to group commands. This is an automated process,

which must be carried out one time after installation of all

programmed modules. Only two-way modules can be detected

(responding to status request). In this mode the IRIX35 detects

which actuators are present in the programmed letter code. This

is necessary to enable the IRIX35 to follow the status of each

module when responding to group commands All Units Off, All

Lights On and All Lights Off. If the status of one ore more

modules has changed by means of a group command the next

transmitted code will be automatically reversed.

This process in which the lights will be switched ON and OFF

automatically will last for approximately 3 minutes. During this

process the LED will continuously show short blinks. Do not

switch or transmit any code over the power line during this

process. After the LED stops blinking the process is completed.

After this procedure the IRIX35 will revert to the operation

mode.

Note: All transmitters which can disturb this

automated process like Computer Interfaces,

Movement sensors etc. must be switched off from

the mains before starting the learn mode!

Do not operate any switches during this process.

Installation methods

• The IRIX35 is designed to be:

- installed on a standard 50 mm junction box or

- installed below a (ceiling) distribution box or

- mounted on a wall (using supplied power cable).

• The infrared "eye" must be in the line of sight of the remote

control as much as possible.

Note: Automatic switching does not just increase

the level of comfort, a number of hazards are also

involved. People may be surprised, or clothing

placed over an electrical heat source may ignite.

Always be aware of these hazards and take the

necessary precautions.

• The product must only be opened for installation purposes.

We advise you to have the product installed by a trained and

certified Marmitek X-10 dealer.

• If the mains lead supplied is used, the wire ends must be

installed up to the insulation in the connector. There must not

be any bare copper visible.

• Never expose the IRIX35 to direct sunlight. Infrared light

components from the sun could seriously affect the operation

of your system.

• Install the IRIX35 at a sufficient distance from high frequency

lighting such as energy-efficient lamps and fluorescent and

compact fluorescent lighting.

• To prevent short circuits, this product should only be used

inside and only in dry spaces. Do not expose the components

to rain or moisture. Do not use the product close to a bath,

swimming pool etc.

• Do not expose the components of your systems to extremely

high temperatures or bright light sources.

• Only connect the product to the mains after checking

whether the mains voltage is the same as the values on the

identification tags. Never connect a power cord when it is

damaged. In that case, please contact your supplier.

• Do not open the product: the device contains live parts. The

product should only be repaired or serviced by a qualified

repairman

• In case of improper usage or if you have opened, altered and

repaired the product yourself, all guarantees expire. Marmitek

X-10 does not accept responsibility in the case of improper

usage of the product or when the product is used for

purposes other than specified. Marmitek X-10 does not

accept responsibility for additional damage other than covered

by the legal product responsibility.

Technical data

Product characteristics

Mains voltage 230 Vac, 50 Hz

Max. power consumption < 2 W

Ambient temperature 0 to 40 °C

Infrared frequency 38 kHz (NEC compatible protocol)

Protection class Class II, Double insulated

Type of protection IP 40 with installation on the wall or

ceiling

IP 20 with installation on the wall.

Standards: IEC 60950

Housing

Dimension (H x W x D) 120 x 80 x 30 mm

Color RAL9001

Power cable

Dimension Length 1.5 m

Color White

Marmitek IRIX35 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info