168923
20
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
20
4)
C-
: Display the remaining time of the current
chapter.
5)
T
: Display the played time of the current title.
6) T-: Display the remaining time of the current ti
tle.
7) C: Display the played time of the current chapter.
8)
Display the current disc’s LANGUAGE, AUDIO
TYPE, SUBTITLE LANGUAGE and PLAY
ANGLE.
Note: The displayed information is different
according to different type of discs.
Last Play Memory
1) During disc playback, if you turn off the unit a
nd
then turn on the unit again, the DVD unit will
resume playing from the point that just
interrupted.
2) During disc playback, if you press
MODE
button to switch to other mode, then return to
DVD mode again, the unit will resume playing
from the point that just interrupted.
USB PLAY OPERATION
On the front of the unit, when you open the USB
cover, you will see an USB interface. An USB device
can be connected through this interface.
When you connect an USB device through the
interface, the unit will search the files in the US
B
driver and start to play automatically.
If in other mode, you can also press
MODE
button
to select USB mode.
When playing the audio/video/photo files in the
device, the operation is the same with DVD
operation described above.
NOTE:
When in USB play mode, be sure not to remove
the USB driver from the USB interface.
When stop USB play, you can remove the USB
drive, after remove USB driver from the unit.
When connecting an MP3 player and there has
normal battery in the player (non rechargeable
battery), you should remove the battery from
the MP3 player then connect it to the USB
interface. Otherwise, it may cause battery burst.
SD CARD OPERATION
On the front of the unit, when you open the USB
cover, you will see a SD card interface. You can
insert a SD card into the interface.
When you insert a SD/MMC card in the SD/MMC
interface, the unit will search the files in the ca
rd and
start to play automatically. The operation is the
same with the DVD operation described above.
If in other mode, you can also press
MODE
button
to select SD/MMC mode.
The corresponding operation please refer to the
DVD OPERATION.
RADIO OPERATION
Switching to Radio Mode
Press
MODE
button on remote control or
MODE
on
the front panel start radio mode.
The band/frequency/station/clock and other
information will display on the display.
Selecting the Frequency Band
Press
BND
button on remote control to select
desired band. The reception band will change in
the following order:
FM1FM2FM3MW1/AM1MW2/AM2
Selecting Station
Press / buttons on the remote control or
press
/ on the front panel shortly to adjust
the frequency manually.
Hold Press
/ on the remote control or hold
press
/ on the front panel for fast tuning.
The frequency is updated correspondingly on
display.
OPERATION
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marquant mcr 1283 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info