Bedienungsanleitung Marquant MCR-1302 (Seite 26 von 92) (Englisch, Holländisch, Französisch)

487659

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

OPERATION

TA interruption function

When listening the traffic

announcement, if you press the TA

button, the traffic announcement will

be interrupted, but the TA mode is still

on. In this mode, you can press

MODE button to change mode to TA

mode and listen to traffic

announcement. Press TA button again

will stop the current traffic

announcement. And the unit will return

to its original station.

The RDS data used are the PI, PS, AF,

TP, TA, EON and PTY data.

PI: Program Identification code

Code for identifying programs

PS: Program Service Name

Broadcast station name data

expressed in alphanumerically

characters

AF: Alternative Frequencies

Frequency list of broadcasting

stations transmitting the same

program

TP: Traffic Program Identification

Identification data for traffic

information-broadcasting station

TA: Traffic Announcement

Identification

Identification data showing traffic

information is being transmitted

or not

PTY: Program Type Code

Contents of programs such as

news, light music, sports etc.

AV OPERATION

Switching to AV mode

There is a pair of AUDIO/VIDEO INPUT

jacks on the front and back of the unit.

When you connect an audio/video system

through these jacks, press MODE button

on the remote control or on the front panel

to select AV mode.

USB PLAY OPERATION

On the front panel of the unit, there is an

USB socket. An USB driver can be

connected through this interface.

1) When there is no disc in the disc slot,

connect an USB driver to the USB

interface, and change the mode to

MEDIA mode, the unit will read the files

stored in the USB device automatically.

When reading an USB device, if insert

a disc to disc slot, the unit will read the

disc automatically.

2) If there is a disc in the disc slot,

connecting an USB driver to the USB

interface, when changing the mode to

MEDIA mode, the unit will play the disc.

Press

(stop) or (pause) button on

the remote control or /MUT on the

front panel to enter PRE-STOP, STOP

or PAUSE mode, then press GOTO

button to read the USB device.

* When reading the USB device, Press

(stop) or (pause) button on the

remote control or /MUT on the front

panel to enter PRE-STOP, STOP or

PAUSE mode, then press GOTO button

will play the disc.

* When reading the USB device,

disconnect the USB device, the unit

will play the disc automatically.

• The main unit can only support the

standard USB-memory disc which

is approved by Microsoft.

• USB MP3 player is not a standard

which means different brand name

or different models have their own

standard. So our product cannot

support every MP3 player.

• When connecting an MP3 player and

there has normal battery in the player

(non rechargeable battery), you

should remove the battery from the

MP3 player then connect it to the

USB interface. Otherwise, it may

cause battery burst.

• When in USB play mode, be sure

not to remove the USB driver from

the USB interface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marquant MCR-1302 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info