Bedienungsanleitung Marshall Code 25 (Seite 2 von 69) (Deutsch, Englisch, Französisch, Spanisch)

671529

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

INTRODUCTION

OVERVIEW

WARNING! IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not install near any heat sources

such as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

8) Do not defeat the safety purpose of

the polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third grounding

prong. The wide blade or the third prong

are provided for your safety. If the provided

plug does not t into your outlet, consult an

electrician for replacement of the obsolete

outlet.

9) Protect the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

10) Only use attachments/accessories

specied by the manufacturer.

11) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

12) Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

13) WARNING: To reduce the risk of re or

electric shock, do not expose this apparatus

to rain or moisture.

14) The appliance coupler is used as the

disconnect device, the disconnect device

shall remain readily operable.

15) The apparatus shall not be exposed to

dripping or splashing and that no objects

lled with liquid, such as vases, shall be

placed on the apparatus.

This “bolt of lightning” symbol indicates uninsulated material

within your unit may cause an electric shock. For the safety of

everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which

you should read the enclosed literature closely to prevent

operating and maintenance problems.

COMPLIANCE STATEMENT

This device complies with Part

15 of the FCC Rules.

Operation is subject to the

following two conditions: (1)

This device may not cause

harmful interference, and (2)

This device must accept any

interference received, including

interference that may cause

undesired operation.

Warning: Changes or

modications to this unit not

expressly approved by the party

responsible for compliance

could void the user’s authority

to operate the equipment.

Note: This equipment has been

tested and found to comply

with the limits for a Class B

digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to

provide reasonable protection

against harmful interference in

a residential installation. This

equipment generates, uses and

can radiate radio frequency

energy and, if not installed

and used in accordance with

the instructions, may cause

harmful interference to radio

communications. However,

there is no guarantee that

interference will not occur

in a particular installation. If

this equipment does cause

harmful interference to radio or

television reception, which can

be determined by turning the

equipment off and on, the user

is encouraged to try to correct

the interference by one or more

of the following measures:

- Reorient or relocate the

receiving antenna.

- Increase the separation

between the equipment and

receiver.

- Connect the equipment into

an outlet on a circuit different

from that to which the receiver

is connected.

- Consult the dealer or

an experienced radio/TV

technician for help.

This equipment complies

with FCC RF radiation

exposure limits set forth for an

uncontrolled environment. This

equipment should be installed

and operated with a minimum

distance of 20 centimeters

between the radiator and your

body.

Industry Canada caution.

This device complies with

Industry Canada licence-

exempt RSS standard(s).

Operation is subject to the

following two conditions:

(1) This device may not cause

interference, and (2) This device

must accept any interference,

including interference that may

cause undesired operation of

the device.

Francais:

Le présent appareil est

conforme aux CNR d’Industrie

Canada applicables aux

appareils radio exempts de

licence.

L’exploitation est autorisée aux

deux conditions suivantes:

(1) l’appareil ne doit pas

produire de brouillage, et

(2) l’utilisateur de l’appareil

doit accepter tout brouillage

radioélectrique subi, même si le

brouillage est susceptible

d’en compromettre le

fonctionnement.

2200

ENGLISH ENGLISH

Power (RMS)

Presets

Speaker

Footcontroller

Weight

Size (in mm)

Connectivity

25 Watts

100 User editable Presets

10” Custom Voiced

4-Way Programmable (PEDL-91009, Sold separately)

8 kg

350 x 340 x 215

Bluetooth

4.0 & USB 2.0

CODE25 TECHNICAL SPECIFICATION

CODE is a new generation of Marshall amplier. Fully programmable, CODE combines

authentic modelling of classic and contemporary Marshall tones with professional

quality FX. CODE preamp, power amp and speaker cabinet models have been developed

in collaboration with audio software pioneers Softube to create Marshall-Softube

(MST) modelling. Featuring Bluetooth

& USB connectivity, and Marshall Gateway™

compatibility, CODE is a powerful tool that lets you make music your way.

CODE is loaded with sonic possibilities. It has 14 MST preamps, 4 MST power amps

and 8 MST speaker cabinets. CODE features 24 FX: including Compressor, stompbox

Distortions, Auto Wah, Pitch Shifter, Chorus, Vibrato, Phaser, Vibes, Flanger and Tremolo.

It includes Studio, Vintage, Multi and Reverse Delays, Tap Tempo, and studio quality

Reverbs. Including Gate, you can have up to 5 FX simultaneously.

Using the Marshall Gateway App for your iOS or Android device you can control CODE’s

settings remotely via Bluetooth and share Presets with other CODE users. You can stream

audio from your device, computer or MP3 player through CODE’s speaker or headphones

for practice, or jam along with tracks from your music library. Connect via USB to use your

CODE amplier as a DAW interface.

We sincerely hope that you enjoy your CODE amplier and we wish you every success,

whatever your performance situation. Thank you for choosing Marshall.

- The Marshall Team

Marshall Code 25 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marshall Code 25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info