Bedienungsanleitung Maxview MXL002 OMNISAT DOME (Seite 18 von 22) (Englisch)

629542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

18 27

SYSTEM

> The second sub-menu in “Main Menu” is “System”

menu. When in the “Main Menu”, highlight “System”

using “ ”/“ ” and “✘”/“✘” buttons and press the

“OK” button. “System” sub-menu is displayed.

> There are “OSD Settings”, “Time and Date”,

“Parental Settings”, “Other Settings” and “Service”

options in this menu.

OSD SETTINGS

> When in the “Main Menu”, highlight “System”

by using “ ”/“ ” and “✘”/“✘” buttons and press

the “OK” button. Select “OSD Settings” and press

the “OK” button again. “OSD Settings” sub-menu is

accessed.

> Highlight “OSD Language” and select a language

using “ ”/“ ” buttons.

> “Prim. Audio Lang”, “Sec. Audio Lang”: Primary and

Secondary audio languages. Some channels broadcast

in multiple languages. The languages that are selected

using these options will be the chosen language for

the channel.

> “Subtitle Language”: Some channels broadcast in

multiple subtitle languages. If the channel that you

are watching has subtitle languages, it is displayed

automatically.

> If you highlight “Transparency” the transparency

can be adjusted to “0%”, “20%”, “40%” or “60%”.

> “Channel Switching” is, freezing the picture,

blanking the screen or fast. Select “Fast”, “Freeze” or

“Blank” by using “ ”/“ ” buttons.

> “Infobar Duration” can be set from 1 second to 5

seconds.



✘

> “OSD Background” and “Radio Background”:

There is one standard OSD and radio background

(“Default”) in your receiver. You can load different

pictures from your PC to the receiver. They appear

in this

option and you can select the picture that you

want.

> Press “MENU” or “EXIT” button to exit from

“OSD Settings” sub-menu. A message “Do you

want to store?” will be displayed if you have

made any

changes. Press the “OK” button to store. Press

“MENU” or “EXIT” button to exit without storing

the changes.

✘

After you have created a new “Favourite Group” you

can change the name of the group. To do this the

“Rename Group” option is used. To add a channel to

the created group, highlight “Add/Rem. Channel” and

press the “OK” button. The menu on the right appears

on the screen. The “Channel List” appears as the left

column and the favourite group list appears as the

right column. Select a channel from the “Channel List”

and press the “OK” button. That channel will now be

added to the “Favourite Channel” list.

LOCK: Press the “GREEN” button to enter the

“Operation” menu in the “Channel List”. Select by

using “ ”/“ ” buttons. “Lock” operation is activated

and by pressing the “OK” button the “PIN” menu

appears. Enter the 4 digit password by using the

number buttons on the remote control. (Factory

setting of your receiver is 0000). The “Lock” menu

is accessed. By using “✘”/“✘” buttons go to the

channel to be locked and press the “OK” button. That

channel will be locked and preﬁxed by the “ ” in the

“Channel List”.

The “Parental lock” operation can also be used on

channels by using this option. The “PIN” menu

appears when you want to access these channels and

the correct PIN must be used to gain access.



✘



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxview MXL002 OMNISAT DOME Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info