Bedienungsanleitung Maxview MXL002 OMNISAT DOME (Seite 19 von 22) (Englisch)

629542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

26 19

AUTOMATIC SEARCH

> When in the “Main Menu”, go to “Installation” by

using “ ”/“ ” and “✘”/“✘” buttons and press the

“OK” button. Press the “OK” button again to enter

the “Automatic Search” option. Select the “All Scan”

sub-menu.

> A satellite can be selected by highlighting “Satellite”

and using the “ ”/“ ” buttons.

> If “Method” is highlighted “Fixed Sr” or

“Transponder” can be selected. If you select

“Transponder” as “Method”, all relevant

transponders will be searched. If you want to search

by symbol rate, select “Fixed Sr” in “Method” and

then enter the “Symbol Rate” by using “ ”/“ ” or

number buttons.

> Select “Only TV”, “Only Radio” or “All” scan type in

“TV/Rad” by using “ ”/“ ” buttons.

> If you want to scan for Free-to-Air channels,

highlight “FTA/Scrambled” and select “FTA Only”. If

you want to scan for both Free-to-Air and other

channels, select “All”.

> “Network Search”: A network information table is

sent by some programs and it shows the location of

other programs. If “Network Search” option is “Yes”,

the receiver tries to ﬁnd the new programs according

to the network information table.



✘

> MOVE: Press the “GREEN” button to enter

“Operation” menu in the “Channel List”. Select by

using “ ”/“ ” buttons. “Move” operation is

activated. When you press the “OK” button the menu

on the right appears. The “Channel List” appears as

the left column and the channels to be moved as the

right column. Select the channel you want to move

and press the “OK” button. That channel goes to the

right column. In this menu press the “GREEN” button

to go to the list on the right. If you select a channel

and press the “OK” button again that channel goes

back to the left column, it can be removed from the

channel list to be moved. All the channels to be moved

are in the right column.

> Press the “YELLOW” button to move the selected

channels to their desired position. In the left column,

by using “✘”/“✘” buttons go to the place the chan-

nels are to be moved to and press the “OK” button. All

the channels that are moved will go to the top of that

selected channel position.

> SWAP: Press the “GREEN” button to enter

“Operation” menu in the “Channel List”. Select by

using “ ”/“ ” buttons, “Swap” operation is

activated. Highlight the ﬁrst channel that you want

to swap and press “OK” button. Then highlight the

second channel that you want to swap, press the “OK”

button again. The two channels have now replaced

each other.



✘



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxview MXL002 OMNISAT DOME Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info