Bedienungsanleitung Microlife IR 100S (Seite 4 von 14) (Englisch, Spanisch)

536873

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

3. How this Ear Thermometer measures

Temperature

This thermometer measures infrared energy radiated from

the eardrum and the surrounding tissue. This energy is

collected through the lens and converted to a temperature

value. The measured reading obtained directly from the

eardrum (Tympanic Membrane) ensures the most accurate

ear temperature.

Measurements taken from the surrounding tissue of the ear

canal generate lower readings and may result in misdiag-

nosis of fever.

To avoid an inaccurate measurement:

4. Control Displays and Symbols

• Never immerse this instrument in water or other

liquids. For cleaning please follow the instruc-

tions in the «Cleaning and Disinfecting» section.

• Do not use the instrument if you think it is damaged or

notice anything unusual.

• Never open the instrument.

• Earwax in the ear canal may cause a lower temperature

reading. Therefore it is important to ensure the subject's

ear canal is clean.

• This instrument comprises sensitive components and

must be treated with caution. Observe the storage and

operating conditions described in the «Technical Specifi-

cations» section.

• Protect it from:

− extreme temperatures

− impact and dropping

− contamination and dust

− direct sunlight

− heat and cold

• If the instrument is not going to be used for a prolonged

period the battery should be removed.

• Ensure that children do not use the instrument unsuper-

vised; some parts are small enough to be swallowed.

WARNING: Use of this instrument is not intended

as a substitute for consultation with your physician.

This instrument is NOT waterproof so do not

immerse in liquids.

1. Switch on the thermometer by pressing the ON/OFF

button 4.

2. After one beep is heard (and the temperature scale icon

is flashing), straighten the ear canal by gently pulling the

middle of the ear back and up.

3. Place the probe 1 firmly into the ear canal, press the

START button 2 and keep the probe in the ear until the

thermometer beeps to signal the completion of the

measurement.

• All segments displayed 6: Press the ON/OFF button

4 to turn on the unit; all segments will be shown for

2 seconds.

• Memory 7: The last reading will automatically be

shown on the display for 2 seconds.

• Ready for measurement 8: The unit is ready for

measurement, the «°C» or «°F» icon will keep flashing.

• Measurement complete 9: The reading will be

shown on the display 3 with the «°C» or «°F» icon; the

unit is ready for the next measurement, when the «°C»

or «°F» icon is flashing again.

• Out-of-ear temperature indication AT: A crossed-

ear-icon will appear on the display 3 if the reading falls

outside the range 32.0 ∼ 42.2 °C (89.6 ∼ 108.0 °F).

• Low battery indication AK: When the unit is turned on,

the battery icon will keep flashing to remind the user to

replace the battery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife IR 100S Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info