Bedienungsanleitung Microlife IR 100S (Seite 5 von 14) (Englisch, Spanisch)

536873

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

5IR 100 EN

5. Directions for Use

6. Changing between Celsius and Fahrenheit

This thermometer can display temperature measurements in

either Fahrenheit or Celsius. To switch the display between

°C and °F, simply turn OFF the unit,

press and hold

the

START button

for 5 seconds; after 5 seconds, the current

measurement scale («

°C

» or «

°F

» icon) will be flashing on the

display

. Change the measurement scale between °C and

°F by pressing the START button

. When the measurement

scale has been chosen, wait for 5 seconds and the unit will

automatically enter the «ready for measuring» mode.

1. Press the ON/OFF button 4. The display 3 is activated

to show all segments for 2 seconds.

The last measurement reading will automatically be

shown on the display for 2 seconds with the «

» icon

When the «

°C

» or «

°F

» icon is flashing, a beep sound is

heard and the thermometer is ready for measurement

4. Straighten the ear canal by pulling the ear up and back

to give a clear view of the eardrum.

• For children under 1 year; pull the ear straight back.

•

For children of 1 year to adult; pull the ear up and back.

Also refer to the short instructions at the front.

5. While gently pulling the ear, insert the probe snugly into

the ear canal (max. 1 sec.) and immediately press the

START button 2. Release the button and wait for the

beep sound. This is the indication that confirms the end

of measurement.

6. Remove the thermometer from the ear canal. The display

shows the measured temperature 9.

)

NOTE:

• To ensure accurate readings, wait at least 30 sec.

after 3-5 continuous measurements.

• Accumulation of ear wax on the probe can result in less

accurate temperature readings or cross infection

between users. Therefore, it is essential that the

probe is clean before each measurement. For

cleaning, follow the instructions in the «Cleaning and

Disinfecting» section.

• After cleaning the measuring sensor 1 with

alcohol, wait 5 minutes before taking the next

measurement, in order to allow the thermometer to

reach its operating reference temperature.

• 10 short beeps will sound when the temperature is

higher than 37.5 °C (99.5 °F) in order to alert the patient

that he/she may have fever.

• For an infant, it is best to have the child lying flat with

his/her head sideways so the ear is facing upwards. For

an older child or adult, it is best to stand behind and

slightly to the side of the patient.

• Always take the temperature in the same ear, since the

temperature readings may be different from ear to ear.

• Wait for a few minutes to take the ear temperature after

sleeping.

• In the following situations it is recommended that three

temperatures in the same ear be taken and the highest

one taken as the reading:

1. New born infants in the first 100 days.

2. Children under three years of age with a compromised

immune system and for whom the presence or

absence of fever is critical.

3. When the user is learning how to use the thermometer

for the first time until he/she has familiarized himself/

herself with the instrument and obtains consistent

readings.

4. If the measurement is surprisingly low.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Microlife IR 100S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info