Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
Operating and installation instructions
Built-in coffee machine
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
M.-Nr. 09 856 380en-GB
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Forum

Suche zurücksetzen

  • Das Gerät erkennt offenbar das Milchgefäss nicht mehr. Es kommt immer die Meldung Milchgefäss leer. Ich habe schon alles gespült und auch das Ventil gesäubert. Was kann ich tun? Eingereicht am 27-12-2021 12:14

    Antworten Frage melden

Inhalt der Seiten


  • Page 1

    Operating and installation instructions
    Built-in coffee machine

    To avoid the risk of accidents or damage to the machine, it is essential
    to read these instructions before it is installed and used for the first time.

    en - GB

    M.-Nr. 09 856 380



  • Page 2

    Caring for the environment
    Disposal of the packing
    material
    The packaging is designed to protect
    the appliance from damage during
    transportation. The packaging materials
    used are selected from materials which
    are environmentally friendly for disposal
    and should be recycled.
    Recycling the packaging reduces the
    use of raw materials in the
    manufacturing process and also
    reduces the amount of waste in landfill
    sites.

    Disposal of your old machine
    Electrical and electronic machines
    often contain valuable materials. They
    also contain materials which, if handled
    or disposed of incorrectly, could be
    potentially hazardous to human health
    and to the environment. They are,
    however, essential for the correct
    functioning of your machine. Please do
    not therefore dispose of it with your
    household waste.

    Please dispose of it at your local
    community waste collection/recycling
    centre, or contact your Dealer for
    advice. Ensure that it presents no
    danger to children while being stored
    for disposal.

    2



  • Page 3

    Contents
    Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
    Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
    Using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Switching on for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
    Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
    Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
    Switching the coffee machine on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
    Spout adjustment (CupSensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
    Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Espresso, Coffee or Long coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Making two portions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
    Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
    Dispensing several cups of coffee one after the other (Coffee pot ²) . . . . . . . . . 29
    Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 29
    Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
    Dispensing hot water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Making drinks using a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    After making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
    Coffee the way you like it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
    Altering the drinks parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Brewing temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
    Pre-brewing the coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
    Setting the portion size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Setting the portion size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
    Resetting drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

    3



  • Page 4

    Contents
    Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Opening a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Selecting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Changing the name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
    Deleting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Changing a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
    Processing drinks for a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    Creating a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    Changing a drink: changing the portion size(s), drinks parameters and names . 41
    Deleting a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
    MyMiele . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
    Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Opening the "Settings" menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
    Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
    Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
    Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
    Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
    Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Info (display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Locking the coffee machine (System lock 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
    Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Spout adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
    Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Miele|home, Remote control and SuperVision. . . . . . . . . . . . . . . . . . . . . . . . . . . 51
    Showroom programme (Demo mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

    4



  • Page 5

    Contents
    Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
    Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
    Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Rinsing the milk pipework. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
    Cleaning the milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
    Milk flask and lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
    Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
    Maintenance of the milk valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
    Sensor cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
    Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
    Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
    Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
    Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
    Interior and machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
    Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
    Removing and cleaning the brew unit by hand . . . . . . . . . . . . . . . . . . . . . . . . 63
    Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
    Appliance front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
    Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
    Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
    Cleaning blockages from the milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
    After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
    Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
    Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
    Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
    Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
    Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
    Adjusting the hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
    Miele|home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
    Copyright and licences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
    Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

    5



  • Page 6

    Guide to the machine
    Exterior view

    a On/Off sensor K
    b Touch display
    c "Back" # sensor
    d Handle
    e Hot water spout
    f Drip tray cover
    g Central spout with lighting and automatic height adjustment
    h Milk flask and lid

    6



  • Page 7

    Guide to the machine
    Interior view

    i Ground coffee chute cover
    j Brew unit
    k Ground coffee chute
    l Slide control to select fineness of ground coffee
    m Coffee bean container
    n Water container
    o Drip tray with grid
    p Waste container
    q Drip catcher
    r Central spout connector
    s Service panel

    7



  • Page 8

    Accessories
    Accessories supplied

    Optional accessories

    – Measuring spoon
    for ready ground coffee

    Miele accessories and cleaning and
    conditioning products are available for
    your coffee machine.

    – Milk flask with lid
    for storing and heating/frothing milk
    – Milk pipework cleaner
    for cleaning the milk system
    (Starter set)
    – 2 containers (large and small)
    for cleaning and maintenance
    – Descaling tablets
    for descaling the water pipework
    (Starter set)
    – Cleaning tablets
    for degreasing the brew unit
    (Starter set)
    – Test strips
    for determining the water hardness
    level
    – Cleaning brush
    for cleaning the milk pipework
    – Silcone grease
    for lubricating the cap on the central
    spout connector
    – Central spout connector cap
    – Angled connector for milk
    pipework
    Replacement part

    These products and other useful
    accessories can be ordered via the
    internet, from Miele (see back cover for
    contact details) or from your Miele
    dealer.
    8

    – Microfibre cloth
    for removing finger marks and light
    soiling
    – Milk flask with lid
    for storing and heating/frothing milk
    – Small lid
    for storing the milk flask in the fridge
    – Milk pipework cleaner
    for cleaning the milk system
    – Descaling tablets
    for descaling the water pipework
    – Cleaning tablets
    for degreasing the brew unit
    – Silcone grease
    for lubricating the cap on the central
    spout connector



  • Page 9

    Warning and Safety instructions
    This coffee machine complies with current safety requirements.
    Improper use can, however, present a risk of both personal injury
    and material damage.
    To avoid the risk of accidents and damage to the machine,
    please read these instructions carefully before using it for the first
    time. They contain important notes on installation, safety, use and
    maintenance.
    Miele cannot be held liable for damage caused by
    non-compliance with these instructions.
    Keep these instructions in a safe place and pass them on to any
    future owner.

    9



  • Page 10

    Warning and Safety instructions
    Correct application

    ~ This coffee machine is intended for use in domestic households
    and similar working and residential environments.
    The guarantee is limited a maximum of 2000 drinks per year where
    the coffee machine is being used in a working or residential
    environment.
    Examples of a working or residential environment include
    – shops, offices and other working environments,
    – small businesses, showrooms etc.,
    – where the coffee machine is being used by customers in hotels,
    motels, bed and breakfast and other similar establishments.

    ~ This coffee machine is not intended for outdoor use.
    ~ It must only be used as a domestic appliance to make espresso,
    cappuccino, latte macchiato etc.
    Any other use is not permitted.

    ~ This coffee machine can only be used by people with reduced
    physical, sensory or mental capabilities, or lack of experience and
    knowledge, if they are supervised whilst using it, or have been
    shown how to use it in a safe way and recognise and understand the
    consequences of incorrect operation.

    10



  • Page 11

    Warning and Safety instructions
    Safety with children

    , There is a danger of burning and scalding from the coffee
    and hot water dispensing spouts.
    Children's skin is far more sensitive to high temperatures than that
    of adults.
    Ensure children do not touch hot surfaces of the coffee machine
    or place any part of their body under the dispensing spouts.

    ~ Install the coffee machine where it is out of the reach of children.
    ~ Children under 8 years of age must be kept away from the
    machine unless they are constantly supervised.

    ~ Children 8 years and older may only use the machine
    unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.

    ~ Children must not be allowed to clean the coffee machine
    unsupervised.

    ~ Please supervise children in the vicinity of the coffee machine
    and do not allow them to play with it.
    Remember that coffee and espresso are not suitable drinks for
    children.

    ~ Danger of suffocation. Packaging, e.g. plastic wrappings, must
    be kept out of the reach of babies and children. Whilst playing, they
    could become entangled in packaging or pull it over their head and
    suffocate.

    11



  • Page 12

    Warning and Safety instructions
    Technical safety

    ~ Installation and repairs may only be carried out by a Miele
    authorised service technician. Installation, repairs and other work by
    unqualified persons can cause considerable danger to users.

    ~ A damaged coffee machine could be dangerous. Before building
    in the machine, check it for any externally visible damage. Do not
    use a damaged machine.

    ~ To avoid the risk of damage to the machine, make sure the
    connection data (voltage and frequency) on the data plate
    corresponds to the household supply, before connecting the
    machine to the mains supply. Consult a qualified electrician if in any
    doubt.

    ~ The electrical safety of this coffee machine can only be
    guaranteed when correctly earthed. It is essential that this standard
    safety requirement is met. If in any doubt please have the electrical
    installation tested by a qualified electrician.

    ~ Do not connect the machine to the mains electricity supply by a
    multi-socket adapter or an extension lead. These are a fire hazard
    and do not guarantee the required safety of the appliance.

    ~ For safety reasons, this machine may only be used when it has
    been built in.

    ~ If the coffee machine is to be built in above another appliance,
    there must be a full-width, closed shelf between them (except in
    combination with a built-in plate warmer).

    ~ The coffee machine must not be used in a non-stationary location
    (e.g. on a ship).

    12



  • Page 13

    Warning and Safety instructions

    ~ The second electrical connection socket on the back of the
    machine may only be used for connecting a Miele EGW 4000-14,
    -29, EGW 5000-14 plate warming drawer or an ESW 6x14, ESW
    6x29 food warming drawer.

    ~ Only use the coffee machine in rooms where the ambient
    temperature is between +10 °C and +38 °C.

    ~ Ensure that there is sufficient ventilation around the coffee
    machine. The ventilation gaps in the furniture housing unit and the
    gap between the top of the housing unit and the ceiling must be at
    least 200 cm2. Otherwise condensation can build up and damage
    the machine or the housing unit.

    ~ If the coffee machine is installed behind a kitchen furniture door,
    it may only be used with the furniture door open. Do not close the
    furniture door while the coffee machine is in use.

    ~ While the machine is under guarantee, repairs should only be
    undertaken by a Miele authorised service technician. Otherwise the
    guarantee is invalidated.

    ~ Faulty components must only be replaced by genuine Miele
    Original spare parts. The manufacturer can only guarantee the
    safety of the machine when Miele replacement parts are used.

    ~ The machine must be disconnected from the electricity supply
    during repair work.

    ~

    Never open the outer casing of the machine. Tampering with
    electrical connections or components and mechanical parts is
    highly dangerous to the user and can cause operational faults or
    electric shock.

    ~ Only use genuine original Miele accessories with this machine.
    Using spare parts or accessories from other manufacturers will
    invalidate the guarantee, and Miele cannot accept liability.
    13



  • Page 14

    Warning and Safety instructions
    Correct use

    , The central spout and hot water spout present a danger of
    burning or scalding.
    The liquids and steam dispensed are very hot.
    Water in the drip tray can also be very hot. Take great care when
    emptying it.
    Do not place any part of your body under the spouts when hot
    liquid or steam are being dispensed.
    Do not touch hot components.
    The nozzles can spray hot liquid or steam. Make sure that the
    central spout is clean and fitted correctly.

    , Never look directly at the lighting or use optical instruments to
    look at it.
    ~ Please note the following regarding water:
    – Only use cold, fresh tap water to fill the water container. Hot water
    and other liquids could damage the coffee machine.
    – Change the water every day to prevent a build-up of bacteria.
    – Do not use mineral water. Mineral water will cause serious
    limescale deposits to build up in your machine and damage it.
    – Do not use water from a reverse osmosis unit in this machine. This
    would damage it.

    14



  • Page 15

    Warning and Safety instructions

    ~ Only fill the bean container with roasted espresso/coffee beans.
    Do not fill the bean container with coffee beans which have been
    treated with additives or with ground coffee.

    ~ Sugar will damage the machine. Only use pure coffee beans. Do
    not use coffee beans which have been treated with anything
    containing caramel, any kind of sugar or other substances. Do not
    put liquids containing sugar in the coffee machine.

    ~ Only add ground coffee or the Miele cleaning tablets for
    degreasing the brew unit to the ground coffee chute.

    ~ Do not use milk with additives. Most additives contain sugar
    which will stick to the milk pipework and damage the machine.

    ~ If using dairy milk make sure that it has been pasteurised.
    ~ Do not place any alcohol mixtures which are alight underneath
    the central spout. The flames could ignite plastic components and
    cause them to melt.

    ~ Do not swing from or hang anything on the machine front when it
    is open as this could damage the machine.

    ~ The machine must not be used for cleaning objects.
    ~ The central spout connector cap is lubricated with silicone
    grease. Take care not to get this on your clothes when removing or
    replacing the containers or other components.

    15



  • Page 16

    Warning and Safety instructions
    Cleaning and care

    ~ The coffee machine must be disconnected from the electricity
    supply before cleaning or maintenance.

    ~ Clean the coffee machine and the milk flask thoroughly before
    using for the first time (see "Cleaning and care").

    ~ Clean the coffee machine and the milk flask every day (see
    "Cleaning and care").

    ~ Do not use a steam cleaner to clean this machine. Steam could
    reach electrical components and cause a short circuit.

    ~ Descale the coffee machine regularly depending on the water
    hardness level in your area. Descale the machine more frequently in
    areas with very hard water. Miele cannot be held liable for damage
    arising from insufficient descaling, the use of incorrect descaling
    agent or the use of descaling agent which is not of the appropriate
    concentration.

    ~ Degrease the brew unit regularly with Miele cleaning tablets.
    Depending on the natural oil content of the coffee used, the brew
    unit can become blocked quite quickly.

    For machines with stainless steel surfaces:

    ~ Do not use sticky notes, transparent adhesive tape, masking tape
    or other types of adhesive on stainless steel surfaces. These
    damage the surface, causing it to lose its dirt repellent protective
    coating.

    ~ The finish on stainless steel surfaces is susceptible to scratching.
    Even magnets can cause scratching.

    16



  • Page 17

    Operation
    Touch display
    The coffee machine is operated by finger tip contact.
    Touching the Touch display with your finger creates a tiny charge which releases
    an electrical impulse. This impulse is recognised by the Touch display.
    It is possible for the Touch display to not react to finger contact if your fingers are
    cold.
    Do not use pointed or sharp objects, e.g. pens, to operate the Touch display
    as they can damage the surface.
    The Touch display will also not react to being tapped by such objects.
    Do not let water get behind the Touch display.
    The screen is divided into three areas:

    The top row shows you where you are, with the menu you are in highlighted in
    white. If you are in a submenu, you can go back a level by touching the symbol for
    "Back" underneath the display or by touching the greyed out name to the left of
    the highlighted menu you are in. The time of day is shown on the top right hand
    side.
    The middle row shows the current menu and options. You can scroll to the right or
    left with the V and W arrows and select various actions.
    In the bottom row you can access the menus displayed by touching the relevant
    grey areas.
    The number of boxes indicates the number of available pages in the current
    menu.

    17



  • Page 18

    Operation
    Operation
    Each touch of an available option changes the relevant field to orange.
    Selecting or opening a menu
    ^ Touch the field you want once with your finger.
    Scrolling
    ^ Swipe the screen, i.e. place your finger on the Touch display and swipe it in the
    direction you want.
    You can scroll to the right or the left. Some options allow you to scroll up and
    down too.
    ^ Touch the V and W arrows to scroll to the left or the right.
    Exiting a menu (# sensor)
    Touch # to return to the previous screen. All entries which have not been
    confirmed by touching "OK" will not be saved.
    Touching the # sensor three times in succession will take you to the drinks menu.
    Touching the "Back" # sensor in the "Profile" menu will take you step by step back
    to the beginning.
    Entering numbers using the numerical keypad z
    You can enter numbers by swiping and touching the roller or via the numerical
    keypad.
    Wait until the roller goes grey again. The entered setting will not be saved until
    it goes grey.
    ^ Touch z.

    18



  • Page 19

    Operation
    The numerical keypad will appear.

    ^ Touch the numbers you want.
    When you enter a valid number, the "OK" field will light up green.
    ^ Touch "OK".
    Entering letters
    Profile names or the names for your own drinks are entered using a keyboard. It is
    best to select short names.

    ^ Touch the letters or characters you want.
    ^ Touch "Save".

    19



  • Page 20

    Operation
    The following symbols can appear in addition to the text and the drinks symbols:
    P P P P G G GM

    Settings, e.g. the brightness of the dsplay or the volume of
    the buzzer and keypad tones, are selected via a bar chart.

    :

    This indicates information and instructions about operating
    the coffee machine.
    Confirm the messages with "OK".

    0

    The system lock is active (see "Settings – Locking the coffee
    machine (System lock 0)"): The coffee machine cannot be
    operated.

    +

    The timer is activated for "Switch on at" (see "Settings –
    Timer").
    The symbol and the desired switching on time appear in the
    display 23:59 hours before the coffee machine is due to
    switch on, as long as "On" or "Night dimming" is selected for
    the time display.

    8

    This symbol appears while "Clean the milk pipework" is
    visible in the display.
    (The symbol is also found on the water container: fill up to
    this marker.)

    F

    This appears while "Descale appliance" is visible in the
    display.
    (The symbol is also found on the water container: fill up to
    this marker.)

    Œ

    SuperVision display – only appears if the coffee machine
    has been signed on to the Miele|home system and
    "SuperVision display – On" has been selected (see separate
    Operating instructions).

    20



  • Page 21

    Using for the first time
    Selecting the language
    Please read the operating
    instructions carefully and take the
    time to familiarise yourself with the
    coffee machine before using it for
    the first time.

    Before using for the first time
    ^ The machine must be correctly
    installed and connected (see
    "Electrical connection" and
    "Installation") before it is used for the
    first time.
    ^ Remove any protective foil.
    Clean the coffee machine
    thoroughly (see "Cleaning and
    Care") before filling it with water and
    coffee beans.

    Switching on for the first time
    When you switch the coffee machine on
    for the first time, after the welcome
    screen has appeared you will be
    prompted to set the following:
    – Language

    ^ Touch the language you want and
    then "OK".
    ^ Touch the country you want and then
    "OK".
    The setting is now saved.
    Setting the date
    ^ Swipe the "Day" field in the display
    until the current day appears.
    ^ Repeat this for "Month" and "Year",
    until the current date has been set.
    ^ Touch "OK".
    The setting is now saved.
    Setting the time (of day)
    ^ Swipe the "Hours" field in the display
    until the number for the current hour
    appears.
    ^ Repeat this for "Minutes", until the
    current time of day has been set.
    ^ Touch "OK".
    The setting is now saved.

    – Date
    – Time (of day)
    – Display (Time (of day) display)
    ^ Touch the On/Off sensor K.
    The welcome message "Miele Willkommen" will appear in the display
    briefly.

    21



  • Page 22

    Using for the first time
    Display

    Water hardness

    You can choose from the following
    options:

    The water hardness level indicates how
    much calcium is dissolved in the water.
    The higher the calcium content, the
    harder the water, and the harder the
    water, the more often the coffee
    machine will need to be descaled.

    – On: the display will always show the
    date and time (even when the
    machine is switched off).
    – Off: the display is dark when the
    machine is switched off.
    – Night dimming: the date and time
    are only displayed between the
    hours of 5:00 and 23:00.
    ^ Touch the option you want and then
    "OK".
    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.
    "Set-up successfully completed" will
    appear in the display.
    "Fill and replace the water container"
    will appear in the display.

    The coffee machine measures the
    quantity of water and steam used. The
    number of drinks which can be
    dispensed before the machine needs to
    be descaled will depend on the water
    hardness level set.
    Set the water hardness level on the
    coffee machine to the water hardness
    level for the local area to ensure that
    the machine functions correctly and is
    not damaged. This will ensure that the
    reminder to descale the machine will
    appear in the display at the correct
    time.
    The machine has four programmable
    levels:

    ^ Fill the water container with fresh,
    cold tap water.

    Water hardness

    Local water
    hardness
    level

    Setting
    (Hardness
    level)

    Tip: Please continue to work though the
    further steps outlined in the operating
    instructions so that you can familiarise
    yourself with the coffee machine and
    set it up for your specific requirements.

    0 - 8.4 °dH
    (0 -1.5 mmol/l)

    Soft

    Soft 1

    8.4 - 14 °dH
    (1.5 - 2.5 mmol/l)

    Medium

    Medium 2

    14 - 21 °dH
    (2.5 - 3.7 mmol/l)

    Hard

    Hard 3

    more than 21 °dH Hard
    (more than
    3.7 mmol/l)

    22

    Very hard 4



  • Page 23

    Using for the first time
    Checking the water hardness level
    You can use the test strip supplied to
    check the water hardness level, or your
    local water supplier will be able to
    advise you on the hardness of the water
    in your area.

    ^ Dip the test strip in your drinking
    water for a second, then shake off
    any excess water. The result will be
    evident after about a minute.
    You can now set the water hardness
    level for the coffee machine.
    Setting the water hardness level
    ^ Touch "Settings" %.
    ^ Swipe the display until "Water
    hardness" appears and then touch
    this.
    ^ Touch the hardness level you want
    and then "OK".
    The setting is now saved.

    23



  • Page 24

    Filling the water container
    ,Bacteria can cause infection.
    It is important to empty and fill the
    container with fresh tap water every
    day to avoid the risk of bacteria
    building up.
    Only use fresh, cold tap water.
    Hot or warm water or other liquids
    could damage the coffee machine.

    ^ Open the front of the coffee machine.

    Do not use mineral water. Mineral
    water will cause serious limescale
    deposits to build up in your machine
    and damage it.

    ^ Pull the water container forwards to
    remove it.
    ^ Take off the lid and fill the water
    container with fresh, cold tap water
    up to the "max." mark.
    ^ Push the water container into the
    machine until it clicks into place.
    If the water container protrudes
    slightly or is a little high, check
    whether the surface that the water
    container sits on is dirty. If the water
    container is not positioned correctly,
    the outlet valve will not connect
    properly and could leak. Clean the
    surface, if necessary.
    24



  • Page 25

    Filling the coffee bean container
    If you want to use freshly ground coffee
    beans for each cup of espresso or
    coffee, fill the coffee bean container
    with roasted coffee beans.
    Alternatively, you can make coffee or
    espresso with ready ground coffee (see
    "Making coffee or espresso using ready
    ground coffee").
    Warning. Only put roasted
    espresso/coffee beans in the
    container.
    Anything else, including ground
    coffee, will damage the grinder.

    Warning. Sugar will damage the
    coffee machine.
    Do not use coffee beans that have
    been treated with sugar, caramel, or
    other substances and do not put
    liquids containing sugar in the
    coffee bean container.

    ^ Pull out the coffee bean container.
    ^ Push back the lid and fill the
    container with roasted coffee beans.
    ^ Slide the lid back into place,
    ^ Push the coffee bean container fully
    back into the coffee machine. Close
    the front.

    25



  • Page 26

    Switching the coffee machine on and off
    Switching on

    Switching off

    When the machine is switched on it
    heats up and rinses out the pipework.
    This cleans and heats the pipework in
    preparation for making coffee.

    ^ Touch the On/Off sensor K.

    If the coffee machine still has an
    operating temperature higher than
    60 °C, then rinsing will not take
    place.
    ^ Touch the On/Off sensor K.
    Tip: If you do not want the water from
    the rinsing process to flow into the drip
    tray, place a suitable container, e.g. the
    small container supplied, underneath
    the central spout before making the first
    coffee of the day.

    If coffee has been dispensed, the
    coffee machine will rinse the coffee
    pipework automatically before
    switching off.

    Switching off for longer
    periods of time
    If the machine is not going to be used
    for a longer period of time, e.g. whilst
    on holiday:
    ^ Empty the drip tray, the waste
    container and the water container.

    After the appliance has heated up, the
    pipework will be rinsed. Hot water will
    be dispensed from the central spout.
    You can now make drinks.

    ^ Clean all components thoroughly,
    including the brew unit, the central
    spout connector and the drip catcher
    in the machine front.
    ^ Switch off the machine.
    If you are leaving the front open while
    the coffee machine is not in being
    used for a long time, disconnect it
    from the mains to save energy.

    26



  • Page 27

    Spout adjustment (CupSensor)
    Switching spout adjustment on or off
    The central spout cannot be
    adjusted manually.
    The coffee machine senses the height
    of the cup or glass being used. When a
    drink has been selected the central
    spout moves automatically to the
    optimum height before dispensing the
    drink.
    Make sure that there is not a spoon
    or similar item in the cup. This would
    prevent the coffee machine from
    sensing the cup height correctly.

    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Settings" %.
    ^ Swipe the display until "Spout
    adjustment" appears and then touch
    this.
    ^ Touch the setting you want in order to
    switch the spout adjustment on or off.
    ^ Touch "OK".
    The setting is now saved.

    You can switch off spout adjustment.
    The central spout will then remain in the
    upper position while the coffee machine
    is switched on. When a maintenance
    programme is being carried out the
    central spout will move to the height of
    the cleaning containers or into a
    maintenance position.
    When the coffee machine is switched
    off the central spout will be in a middle
    position.

    27



  • Page 28

    Making drinks
    Espresso, Coffee or Long
    coffee
    These drinks are in the drinks menu.

    Making two portions
    You can request two portions of
    espresso, coffee or long coffee to be
    dispensed at once either into one cup
    or two separate cups.
    These drinks are in the drinks menu.
    To dispense two cups of coffee or
    espresso at the same time:

    ^ Place a cup under the central spout.
    ^ Touch Espresso ., Coffee / or Long
    coffee /.
    The coffee or espresso will be
    dispensed from the central spout into
    the cup.
    To ensure that any coffee residues
    from the factory testing process are
    removed from the brewing system,
    please throw away the first two cups
    of coffee when using the coffee
    machine for the first time.

    28

    ^ Place a cup under each of the coffee
    dispensers in the central spout.
    ^ Touch the two cup symbol for the
    drink you want.
    Preparation will begin and two portions
    of the desired drink will be dispensed
    from the central spout.



  • Page 29

    Making drinks
    Cancelling preparation
    To cancel preparation:
    ^ Touch "Stop"
    or
    ^ Touch "Cancel".

    Dispensing several cups of
    coffee one after the other
    (Coffee pot ²)
    You can make several cups of coffee
    one after the other automatically with
    the "Coffee pot" function (max. 1 litre).
    Up to eight cups can be made at once.
    ^ Place a suitable container
    underneath the central spout.
    ^ Swipe the display until "Coffee pot" ²
    appears and then touch this.

    Making espresso and coffee
    using ready ground coffee
    To make espresso or coffee using
    ready ground coffee, add a portion of
    ground coffee to the ground coffee
    chute.
    This gives you the option of making a
    cup of decaffinated coffee, for
    example, even though the coffee bean
    container is filled with roasted coffee
    beans.
    The coffee machine will automatically
    recognise that ready ground coffee has
    been added to the ground coffee
    chute.
    Only one portion can be made at a time
    when using ready ground coffee.

    ^ Touch the number of cups you want
    (3 to 8).
    ^ Follow the instructions in the display.
    The coffee for each cup is individually
    ground, brewed and dispensed. Each
    stage of the process is shown in the
    display.
    You can interrupt the process at any
    time, by
    ^ touching "Cancel" or "Stop".
    You can use the "Coffee pot" function
    twice in succession. After this the
    coffee machine will need to cool
    down for an hour in order to avoid it
    being damaged.

    29



  • Page 30

    Making drinks
    Adding ready ground coffee
    Use the coffee spoon supplied.
    Do not add more than one level
    spoon of ground coffee to the coffee
    chute. If too much is added, the
    brew unit will not be able to process
    the coffee.

    The coffee machine will use all the
    ground coffee which has been added
    to the chute to make the next coffee.
    ^ Open the front of the coffee machine.

    Making espresso and coffee using
    ready ground coffee
    If you want to use ready ground coffee
    to make the drink:
    ^ Touch "Yes".
    You can now select whether you want
    to dispense a coffee or an espresso
    made with ground coffee.
    ^ Place a cup under the central spout.
    ^ Touch the drink you want.
    This will now be dispensed.
    If you do not want to use ready ground
    coffee to make the drink:
    ^ Touch "No".
    The ground coffee will be directed into
    the waste container.
    If no drink is selected within
    approx. 15 seconds, the ground
    coffee will be directed into the waste
    container.

    ^ Remove the cover of the ground
    coffee chute. Open the lid of the
    chute.
    ^ Add one level spoon of ready ground
    coffee.
    ^ Close the lid. Push the cover into the
    machine. Close the front.
    "Use ground coffee?" will appear in the
    display.

    30



  • Page 31

    Making drinks
    Drinks with milk
    Only use pasteurised milk to avoid a
    build-up of bacteria.
    You can use milk to make different
    coffee specialities, hot milk or milk
    froth.
    The following can be made:
    Cappuccino H consisting of two thirds
    milk froth and a third espresso.

    a lid

    Latte macchiato k consisting of a third
    hot milk, a third milk froth and a third
    espresso.

    b sensor

    Caffè latte ± consisting of hot milk
    and coffee.

    d glass flask

    Milk flask
    The milk will not keep cool in the milk
    flask. It should therefore be kept in
    the fridge if you are not going to be
    using milk for a long period. Cold
    milk (below 13 °C) gives the best
    results for milk froth.

    c milk suction tube

    ^ Fill the flask with milk up to a
    maximum of 2 cm below the rim.
    Close the flask with the lid.
    It is important to keep the opening
    and the neck of the flask clean
    (whilst filling it and carrying it). If the
    flask is dirty it may not work
    properly.

    Do not use milk with additives.
    Sugar additives will stick to the milk
    pipework.

    ^ Push the milk flask fully into the
    coffee machine.

    31



  • Page 32

    Making drinks
    Making drinks with milk

    Making drinks using a profile

    These drinks are in the drinks menu.

    If you have set the machine up for a
    specific user profile (see "Profiles") you
    can select this before you make a drink.

    ^ Place a suitable container
    underneath the central spout.
    ^ Swipe the display until the drink you
    want appears and then touch this.
    The coffee selected will be dispensed.

    ^ Touch "Profile" {.
    ^ Swipe the display until "Select profile"
    appears and then touch this.
    ^ Touch the profile you want.

    Dispensing hot water

    ,Danger of burning and scalding
    on the hot water spout. The water
    dipsensed is very hot.

    The profile name will appear in the
    display to show that a profile has been
    selected.
    You can now make the drink you want.

    After making drinks
    Please note that the water dispensed
    is not hot enough for making tea.
    The hot water option is in the drinks
    menu.
    ^ Place a suitable container
    underneath the hot water spout.
    ^ Swipe the display until "Hot water"
    appears and then touch this.
    Hot water is dispensed into the
    container under the spout.
    To cancel preparation:
    ^ Touch "Cancel" or "Stop".
    Preparation will be cancelled.

    32

    If you have made a drink with milk, the
    following message appears in the
    display after a while "Start rinse cycle"
    ^ Touch "OK".
    The milk pipework will now be rinsed
    through.
    Even if you do not confirm the
    message with "OK", the coffee
    machine will rinse the milk pipework
    after a few minutes automatically.



  • Page 33

    Coffee the way you like it
    To customise the coffee machine to suit
    your exact requirements, you can
    – adjust the grinder setting,
    – change the amount of coffee,
    – set the brewing temperature, or
    – switch on the "Pre-brewing" option.

    Grinder setting
    You can adjust the grinder setting to
    suit the type of coffee you are using.

    To avoid damaging the grinder:
    Only ever adjust the grinder by one
    setting at a time.
    Grind the coffee beans again if you
    want to adjust the grinder to the next
    setting.
    ^ Open the front of the coffee machine.

    When the beans are ground correctly,
    the coffee or espresso will flow evenly
    into the cup with a good crema.
    The crema should have an even
    nut-brown colour.
    There are various ways to tell whether
    the coffee grinder is set correctly.
    The coffee is too coarsely ground, if
    – espresso or coffee flows into the cup
    very quickly.
    – the crema is very pale and uneven.

    ^ Push the slide control one setting to
    the left (for finer grinding) or one
    setting to the right (for coarser
    grinding).

    Set a finer grinder setting.

    ^ Close the front.

    The coffee is too finely ground, if

    ^ Make a coffee.

    – espresso or coffee only trickles into
    the cup.

    Then move the slide control again.

    – the crema is dark brown.
    Set a coarser grinder setting.

    The altered grinder setting will not be
    used until after the second coffee has
    been dispensed.

    33



  • Page 34

    Coffee the way you like it
    Altering the drinks parameters
    You can set the amount of coffee,
    pre-brewing and the brewing
    temperature for each drink individually.
    Start in the drinks menu.
    ^ Touch "Process" or swipe the screen
    until "Make drinks" appears and
    touch this.
    ^ Touch "Change drink".
    ^ Swipe the screen until the drink you
    want appears and then touch this.
    ^ Touch "Drink parameters".

    – espresso or coffee only trickles into
    the cup.
    – the crema is dark brown.
    – the espresso or coffee tastes bitter.
    Decrease the amount of coffee so that
    less ground coffee is brewed.
    ^ Touch "Amount of coffee".
    ^ Touch the bar for the amount of
    coffee you want and then "OK".

    Brewing temperature

    You can now:

    The ideal brewing temperature will
    depend on

    – change the amount of coffee,

    – the type of coffee,

    – set the brewing temperature, or

    – whether an espresso or a coffee is
    being made, and

    – switch on the "Pre-brewing" option.

    Amount of coffee
    The coffee machine can grind and
    brew 6-14 g of coffee per cup. The
    greater the quantity, the stronger the
    coffee or espresso.
    There are various ways to tell whether
    the amount of coffee is set correctly.
    The amount of coffee is too low, if
    – espresso or coffee flows into the cup
    very quickly.
    – the crema is very pale and uneven.
    – the espresso or coffee lacks body.
    Increase the amount of coffee so that
    more ground coffee is brewed.
    The amount of coffee is too high, if

    34

    – the altitude of the region.
    If the coffee machine is located at more
    than 2000 metres above sea level, the
    brewing temperature needs to be set
    lower due to the change in pressure.
    This is because the boiling point for
    water at a high altitude is lower than the
    boiling point for water at sea level.
    There are five brewing temperatures.
    Tip: Not all types of coffee can
    withstand a high temperature. Certain
    types are too delicate - the crema on
    top would not be as good and the taste
    would be impaired.



  • Page 35

    Coffee the way you like it
    ^ Swipe the screen in the "Brew
    temperature" field until the setting you
    want appears.
    ^ Touch "OK".
    The setting is now saved.

    Pre-brewing the coffee
    When the Pre-brewing function is
    switched on, the freshly ground coffee
    is first moistened with a little hot water.
    Then the remaining water is forced
    through the moistened coffee at high
    pressure. This helps release the flavour
    of the coffee.
    You can select a short or long
    Pre-brewing, or deselect "Pre-brewing"
    altogether.
    The machine is delivered with
    "Pre-brewing" switched off.
    ^ Swipe the screen in the "Pre-brewing"
    field until the setting you want
    appears.
    ^ Touch "OK".
    The setting is now saved.

    35



  • Page 36

    Setting the portion size
    The flavour of the coffee produced
    depends on the type of coffee, how
    finely the beans are ground and the
    quantity of water used.
    You can programme the amount of
    water used for espresso, coffee or hot
    water to suit the size of your cup and
    the type of coffee you are using.

    Setting the portion size

    For coffee made with milk, in addition to
    programming the portion size of coffee
    you can programme the amount of milk
    and milk froth used. You can also
    programme the portion size for hot milk
    and froth.

    ^ Swipe the screen until the drink you
    want appears and then touch this.

    There is a maximum amount which can
    be programmed for each type of drink.
    Preparation stops when this is reached.
    The maximum amount possible for that
    type of drink will then be saved.

    ^ Touch "Save" when the cup has been
    filled to the level you want.

    The changed portion size is always
    saved in the current profile. The
    name of the current profile is shown
    in the top left of the display.
    If there is insufficient water in the
    water container, the process for
    programming the amount will be
    stopped and the amount will not be
    saved.

    Start in the drinks menu.
    ^ Place the desired cup under the
    central spout.
    ^ Touch "Process".
    ^ Touch "Change drink".

    ^ Touch "Change the portion size".
    The required drink will be prepared and
    "Save" will appear in the display.

    If you want to change the portion size
    for cappuccino, latte macchiato or
    caffè latte, the ingredients
    (components) which make up the drink
    will appear in the display.
    Cappuccino: milk froth, espresso
    Latte macchiato: hot milk, milk froth,
    espresso
    Caffè latte hot milk, coffee
    ^ Touch the ingredients you want to
    programme the portion size for.
    The ingredients selected will have a tick
    9 beside them.
    ^ Touch "OK".

    36



  • Page 37

    Setting the portion size
    The coffee machine starts making the
    drink. You can now programme the
    portion size for each selected
    ingredient as soon as Save appears in
    the display.
    ^ Touch "Save" when the amount you
    want of the particular ingredient has
    been dispensed.
    ^ Save the portion size required for the
    selected ingredients.
    The programmed mix of ingredients
    and portion sizes will now be
    dispensed every time that particular
    drink is selected.

    37



  • Page 38

    Resetting drinks
    You can reset the portion sizes and the
    parameters for all drinks back to their
    factory default setting.
    Start in the drinks menu.
    ^ Touch "Process".
    ^ Touch "Reset drinks".
    "Reset all drinks to default?" will appear
    in the display.
    ^ Touch "Yes".

    38



  • Page 39

    Setting up profiles
    You can enter individual profiles to
    cater for different tastes and
    preferences. For each individual profile
    you can select the portion sizes for
    each drink (see "Setting the portion
    size").
    The name of the current profile is
    shown in the top left of the display.

    – Change profile, to programme the
    coffee machine so that it changes
    back to the Miele standard profile
    automatically after each drink is
    dispensed or so that it retains the
    most recently selected profile.

    Creating a profile
    ^ Touch "Create profile".

    Opening a profile

    The editor will open in the display.

    ^ Touch "Profiles" { in the main menu or
    the "Profiles" field in the drinks menu.

    ^ Enter the name you want and touch
    "OK".

    ^ You can now create a profile.
    If you have already created a profile in
    addition to the standard Miele profile,
    you also have the following options:
    – Select profile from the profiles which
    are already allocated.
    – Change name, if you want to alter
    the name of a profile.
    – Delete profile, if you want to delete a
    profile.

    Selecting a profile
    ^ Touch the profile you want.
    The name of the current profile is
    shown in the top left of the display.

    Changing the name
    ^ Touch "Process".
    ^ Touch "Change name".
    ^ Touch the profile you want and then
    "OK".
    ^ Enter the name you want and then
    touch "OK".

    39



  • Page 40

    Setting up profiles
    Deleting a profile
    ^ Touch "Process".
    ^ Touch "Delete profile".
    ^ Touch the profile you want and then
    "OK".

    Changing a profile
    You can programme the coffee
    machine so that it changes back to the
    Miele standard profile automatically
    after each drink is dispensed or so that
    it retains the most recently selected
    profile.
    ^ Touch "Process".
    ^ Touch "Change profile".
    You now have the following options:
    Manually
    The currently selected profile will be
    retained until you select another profile
    manually.
    After each use
    The machine will change back to the
    Miele standard profile automatically
    after a drink is dispensed.
    When switched on
    Each time the machine is switched on it
    will automatically select the Miele standard profile regardless of which profile
    was selected before the machine was
    last switched off.
    ^ Touch the option you want and then
    "OK".

    40



  • Page 41

    Processing drinks for a profile
    You can create your own drinks for
    each profile and set the portion size
    and drinks parameters, e.g. amount of
    coffee, brewing temperature for each
    drink individually.
    You can also change the names of the
    drinks and delete any unwanted drinks
    from the profile. A profile can contain a
    maximum of nine drinks.

    ^ Enter a name for the newly created
    drink (maximum of 8 characters) and
    touch "Save".
    The newly created drink will appear in
    the profile.

    Changing a drink: changing
    the portion size(s), drinks
    parameters and names

    ^ Touch "Profiles" { in the main menu or
    the "Profile" field in the drinks menu.

    ^ Touch "Process".

    ^ Select the profile you want.

    ^ Touch "Change drink".

    The name of the current profile is
    shown in the top left of the display.

    ^ Swipe the screen until the drink you
    want appears and then touch this.

    Creating a drink
    You can create new drinks based on
    existing drinks. A profile can contain a
    maximum of nine drinks.
    The "Create drink" option will only
    appear if there are less than nine drinks
    already in the profile.
    ^ Touch "Process".
    ^ Touch "Create drink".
    You can now select from the standard
    drinks:

    You can now either change the portion
    size(s), drinks parameters or the names
    as described in "Setting the portion
    size" and "Coffee the way you like it".

    Deleting a drink
    ^ Touch "Process".
    ^ Touch "Delete drink".
    ^ Swipe the screen until the drink you
    want appears and then touch this.
    ^ Touch "OK".

    ^ Swipe the screen until the drink you
    want appears and then touch this.
    ^ Change the drinks parameters and
    the portion size(s) for this drink (see
    "Coffee the way you like it" and
    "Setting the portion size").
    Preparation will begin and you can
    save the portion size you want for the
    individual ingredients.

    41



  • Page 42

    MyMiele
    You can display drinks you make
    frequently, drinks from profiles and
    maintenance programmes in the
    MyMiele screen.

    To delete entries
    ^ Touch "Process".
    ^ Touch "Delete entry".

    The MyMiele screen can be set to
    appear as the start screen (see
    "Settings - Start screen"). The MyMiele
    screen will then appear when the coffee
    machine is switched on.

    ^ Select the entry you want and then
    touch "OK".

    Opening the MyMiele Š menu

    ^ Touch "Process".

    ^ Touch "MyMiele" Š in the main
    menu.

    ^ Touch "Sort entry".

    You can now configure "MyMiele" and
    add entries ("Add entry").
    If you have already added some
    entries, you can carry out the following
    under "Process":
    – sort or
    – delete entries.

    To add entries
    ^ Touch "Add entry".
    You can select options listed in the
    following categories:
    – Drinks /
    – Profiles {
    – Maintenance y
    ^ Touch the option you want and then
    "OK".
    A box will appear next to the selected
    option together with the menu it comes
    from.

    42

    The entry will be deleted.

    To sort entries

    ^ Now select the entry you want to
    move and and the position you want
    to move it to.
    ^ Confirm the new position with OK.



  • Page 43

    Settings
    You can use the "Settings" menu to
    customise the coffee machine to suit
    your requirements.

    Changing and saving settings
    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Settings" %.

    Opening the "Settings" menu
    Start in the drinks menu.
    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Settings" %.
    You can now check or make alterations
    to settings.

    ^ Swipe the screen until the setting you
    want appears and then touch this.
    ^ Swipe the screen until the option you
    want appears and then touch this.
    The setting is now saved.

    Touch # to return to the previous
    menu.
    The settings which are currently
    selected will have a coloured frame
    around them.

    43



  • Page 44

    Settings
    Possible setting options
    The factory setting for each option is shown in bold.
    Option

    Available settings

    Language

    Deutsch, English and other languages
    Country

    Time

    Display
    Off / On / Night dimming
    Clock type
    Analogue /Digital
    Clock format
    12 h / 24 h
    Set

    Date

    Set

    Timer

    Timer 1
    Set
    Switch on at / Switch off after (1:00) / Switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    Switch on at (Yes / No) / Switch off at (Yes / No)
    Timer 2
    Set
    Switch on at / Switch off at
    Days of the week
    Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
    Sunday / Accept
    Activate
    Switch on at (Yes / No) / Switch off at (Yes / No)

    Eco mode

    Eco mode (On / Off)

    Lighting

    Display brightness
    Switch off after

    Start screen

    Main menu
    Drinks menu
    Profiles
    MyMiele

    Info

    Number of drinks
    Total no. of portions / espresso / coffee / long coffee / cappuccino /
    latte macchiato / cafè latte / milk froth / hot milk / hot water
    No. of uses until
    Descaling / Degreasing the brew unit

    System lock

    On / Off

    44



  • Page 45

    Settings
    Option

    Available settings

    Water hardness

    Soft 1
    Medium 2
    Hard 3
    Very hard 4

    Display brightness

    Set

    Volume

    Buzzer tones
    Keypad tone

    Plate warmer

    On / Off / Automatic

    Spout adjustment

    On / Off

    Showroom programme

    Demo mode (On/ Off)

    Factory default

    Appliance settings
    MyMiele

    45



  • Page 46

    Settings
    Language

    Clock type

    You can select the language (and
    country variant of that language) for all
    display text.

    The time can be displayed as

    Tip: If you select the wrong language
    by mistake, follow the flag symbol F to
    find the "Language" option again.

    Time

    Analogue or

    You can set the time display, the clock
    format and the time.
    Display (Time of day display)
    You can shoose from the following
    options:
    – On: The time will show in the display
    all the time, even when the machine
    is switched off.

    Digital.

    – Off: The time will not show in the
    display when the machine is
    switched off.

    The options are:

    – Night dimming: The time will only
    show in the display during the
    daytime.

    – 12-hour display (12 h)

    The coffee machine will use more
    energy depending on the option you
    choose for the display. Information
    about this will appear in the display.

    Clock format

    – 24-hour display (24 h)

    Setting the time
    You set the hours and minutes.
    Synchronise
    This option will only appear if the coffee
    machine is signed on to the
    Miele|home system (see separate
    Operating instructions).

    Date
    You set the day, month and year.

    46



  • Page 47

    Settings
    Timer
    There are two timers with the following
    functions:
    The coffee machine
    – switches on at a particular time, e.g.
    in the morning for breakfast ("Switch
    on at"),
    – switches off at a particular time
    ("Switch off at"),
    – switches off after a particular length
    of time if none of the sensors has
    been touched or no drink has been
    made ("Switch off after"; only with
    Timer 1).
    You can also allocate timer functions to
    individual days of the week.
    For "Switch on at" and "Switch off at",
    the timer must be activated and at
    least one day of the week allocated.
    Selecting a timer
    The options are:
    – Timer 1:
    Switch on at, Switch off at, Switch off
    after
    – Timer 2:
    Switch on at, Switch off at

    Switch on at
    The coffee machine will not switch on
    at the required time if you have
    activated the system lock.
    The timer settings are deactivated.
    If the coffee machine has switched
    itself on three times using the "Switch
    on at" timer function and no drinks have
    been dispensed, the machine will not
    switch itself on again automatically.
    This prevents the coffee machine from
    switching itself on unnecessarily, for
    example whilst you are away on holiday.
    The programmed times will, however,
    remain in memory and will be
    reactivated after manually switching the
    machine on again.
    Switch off at
    If the coffee machine is not used for a
    long time, e.g. whilst you are away on
    holiday, the saved times will be
    reactivated after manually switching the
    machine on again (see "Switch on at").
    Switch off after
    The "Switch off after" timer function is
    only available in Timer 1.
    If none of the sensors has been
    touched or a drink has not been made,
    the coffee machine will switch itself off
    after 30 minutes to save energy.
    You can change this to another time of
    between 15 minutes and 9 hours.

    47



  • Page 48

    Settings
    Allocating days of the week

    Eco mode

    Select the day of the week you want.
    The selected day of the week will be
    marked with a tick 9.

    The Eco mode is an energy saving
    mode. The steam system only heats up
    when a coffee or steam for hot milk or
    milk froth is selected.

    When all days of the week required are
    marked:
    ^ Touch "OK".
    Activating and deactivating the timer
    If the timer is activated for "Switch on
    at", the + symbol and the desired
    switching-on time appear in the display
    23:59 hours before, as long as "On" or
    "Night dimming" is selected for the time
    display.
    When the system lock is activated,
    the "Switch on at" option for the timer
    cannot be selected.
    Select the required timer function. The
    timer function selected will be marked
    by a tick 9.
    When the timer functions required are
    marked:
    ^ Touch "OK".

    48

    If Eco mode is switched off, milk froth
    and hot milk, as well as coffee and
    espresso, can be made one after
    another. The steam system remains
    heated up and much more energy is
    used.
    The coffee machine will indicate that
    the energy consumption has been
    altered.



  • Page 49

    Settings
    Lighting

    Info (display information)

    You have the following options:

    In the "Info" option, the number of
    portions prepared for each individual
    drink can be displayed.

    – You can set the brightness when the
    machine is switched on.
    – You can set the brightness when the
    machine is switched off.
    – You can specify when the lighting
    should switch off ("Switch off after").
    Set the brightness
    First select:
    – Appliance switched on

    You can also see whether more than 50
    portions can be dispensed before the
    machine needs to be descaled ("No. of
    uses until the appliance needs
    descaling").
    To return to the previous display:
    ^ Touch "OK".

    – Appliance switched off

    Locking the coffee machine
    (System lock 0)

    Setting the time the lighting switches
    off (Switch off after)

    You can lock the coffee machine to
    prevent it being used without your
    knowledge, by children, for example.

    You can adjust the length of time that
    the coffee machine remains lit up after
    switching off.

    Activating and deactivating the
    system lock 0

    When the coffee machine is switched
    on it remains lit up for 10 minutes after
    the last action. This time cannot be
    adjusted.

    Start screen

    When the system lock is activated,
    the "Switch on at" timer settings are
    deactivated.
    The coffee machine will not switch on
    at the required time.

    You can choose which screen appears
    when the coffee machine is switched
    on.
    – Main menu
    – Drinks
    – Profiles
    – MyMiele

    49



  • Page 50

    Settings
    Overriding the system lock
    Whilst "Press for 5 seconds to unlock" is
    showing in the display,
    ^ touch the lock symbol for 5 seconds.
    As soon as you switch the coffee
    machine off, the system lock will be
    activated again and the coffee
    machine is locked.

    Water hardness
    See "Using for the first time" for
    information about water hardness.

    Display brightness
    You can set the display brightness in
    the bar chart.

    Volume
    You can set the volume of the buzzer
    and keypad tones in the bar chart.

    Plate warmer
    A warming drawer can be connected
    directly to a socket at the rear of the
    coffee machine using a special
    connection cable (available as an
    optional accessory). Miele or your Miele
    dealer will be able to advise you on
    which warming drawers are suitable.
    The special connection cable required
    is available to order from Miele or your
    Miele dealer.
    Once the warming drawer is
    connected, you will need to activate it
    in "Settings".

    50

    You can shoose from the following
    options:
    – Automatic: The warming drawer will
    switch on and off together with the
    coffee machine.
    If you have programmed the "Switch
    on at" timer, the warming drawer will
    switch on approx. 30 minutes before
    the coffee machine switches on in
    order to pre-heat your cups.
    – On: You can switch the warming
    drawer on or off manually whenever
    you want, independently of the
    coffee machine.
    – Off: The warming drawer cannot be
    switched on because no electricity is
    being supplied by the coffee
    machine.
    The coffee machine is delivered with
    the "Off" option for the plate warming
    drawer setting is selected.

    Spout adjustment
    Please see "Spout adjustment
    (CupSensor)" for details of this feature.



  • Page 51

    Settings
    Factory default
    You can reset the settings back to the
    ones which were set when the coffee
    machine was delivered - the factory
    default settings and also delete
    MyMiele entries.
    Please refer to the "Possible setting
    options" chart for the factory settings
    which are shown in bold.
    Please note that the following settings
    will not be reset:
    - Language
    - Time
    - Number of drinks (dispensed)
    - Profiles

    Showroom programme (Demo
    mode)
    Do not activate this setting for
    domestic use!
    The coffee machine can be
    demonstrated in the showroom using
    the "Showroom programme". In this
    mode the machine lights up but drinks
    cannot be made or actions taken.
    The coffee machine cannot be
    switched off with the On/Off sensor K
    when demo mode is activated.

    Miele|home, Remote control
    and SuperVision
    These options will only appear if the
    coffee machine has been signed on to
    the Miele|home system (see separate
    Operating instructions).

    51



  • Page 52

    Cleaning and care
    Quick guide

    ,Clean the coffee machine regularly to avoid a build-up of bacteria.
    Recommended frequency
    Every day
    (at the end of the day)

    What do I have to clean / maintain?
    the milk flask and lid
    the water container
    the waste container
    the drip tray and the drip tray cover

    Once a week
    (or more often if badly soiled)

    the central spout
    the central spout connector
    clean the milk valve with the cleaning brush
    the interior
    the small drip catcher inside the front of the machine
    the brew unit
    the front of the machine (especially straight after descaling)

    Once a month

    lubricate the cap on the central spout connector

    When prompted to

    the milk pipework (using the cleaning agent for milk
    pipework)
    the brew unit (degrease with the cleaning tablets)
    descale the machine

    As required

    the coffee bean container
    use the cleaning brush to remove any blockages from the
    milk pipework

    Some components of the coffee machine are dishwasher-safe. However,
    cleaning these in the dishwasher frequently can cause them to become
    discoloured due to regular contact with food residues (e.g. tomatoes) in the
    dishwasher. The surface can also become damaged.
    The following must be cleaned by hand only:
    – Central spout cover
    – Milk flask lid
    – Brew unit
    – Coffee bean container and the coffee bean container lid
    – Service panel
    52



  • Page 53

    Cleaning and care
    ,Danger of burning and scalding!
    Allow the coffee machine to cool
    down before cleaning. Please be
    aware that the water in the drip tray
    will be very hot.

    All surfaces are susceptible to
    scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the surfaces.

    Do not use a steam cleaning
    appliance to clean the coffee
    machine as this will damage the
    machine.

    Wipe up any spillages or splashes
    of descaling agent immediately.

    Do not use cleaners containing
    chlorides, acids, soda or scouring
    agents. These would damage the
    surface.

    Do not use the following on all types
    of front:
    – cleaning agents containing soda,
    ammonia, acids or chlorides,
    – solvent-based cleaning agents,

    It is important to clean the machine
    regularly as the used coffee grounds
    will soon go mouldy. Sour milk deposits
    can block the milk pipework.
    The central spout connector cap is
    lubricated with silicone grease. Take
    care not to get this on your clothes
    when removing or replacing the
    containers or other components.

    – cleaning agents containing
    descaling agents
    – stainless steel cleaning agents,
    – dishwasher cleaner,
    – oven cleaner,
    – glass cleaning agents,
    – abrasive cleaning agents, e.g.
    powder cleaners and cream
    cleaners,
    – hard, abrasive sponges, e.g. pot
    scourers, brushes or sponges which
    have been previously used with
    abrasive cleaning agents,
    – melamine eraser blocks,
    – sharp metal tools.

    53



  • Page 54

    Cleaning and care
    Rinsing the coffee machine
    When a coffee drink has been
    dispensed, the coffee machine rinses
    itself before switching off to remove any
    remaining coffee residue.
    You can also rinse the machine
    manually.
    ^ Touch "Main menu" or the # sensor.

    Milk pipework
    All parts of the milk system need to
    be cleaned thoroughly and
    regularly.
    Milk contains bacteria which
    proliferate rapidly with inadequate
    cleaning. A dirty machine can be
    harmful to health.

    ^ Touch "Maintenance" y.

    Rinsing the milk pipework

    ^ Touch "Rinse appliance".

    Milk residue can clog up the milk
    pipework. If you have made a drink with
    milk, the coffee machine will rinse the
    milk pipework after a few minutes.

    The pipework will not be rinsed
    through. The water used for rinsing
    process will run out of the central spout.

    You can also rinse the milk pipework
    manually.
    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Maintenance" y.
    ^ Touch "Rinse the milk pipework".
    The milk pipework will now be rinsed.

    54



  • Page 55

    Cleaning and care
    Cleaning the milk pipework
    All parts of the milk system need to
    be cleaned thoroughly and
    regularly.
    Milk contains bacteria which
    proliferate rapidly with inadequate
    cleaning. A dirty machine can be
    harmful to health.
    The milk pipework must be cleaned at
    least once a week. The coffee machine
    will prompt you at the correct time.
    "Clean the milk pipework in 3 days" will
    appear in the display three days before
    the coffee machine is due to be
    cleaned. Each time the coffee machine
    is switched on the number of days until
    the milk pipework needs to be cleaned
    will appear in the display.
    ^ Touch "OK" to confirm this message.
    When the number of days remaining
    reaches 0, "Clean the milk pipework"
    will appear in the display. You cannot
    make drinks with milk until cleaning has
    been carried out.

    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Maintenance" y.
    ^ Touch "Clean the milk pipework".
    The process will start and various
    messages will appear in the display.
    ^ Follow the instructions.
    When "Fill water container with
    lukewarm water and cleaning agent up
    to the 8 symbol and replace it"
    appears, proceed as described below.
    Preparing the cleaning solution:
    We recommend using Miele milk
    pipework cleaning agent for cleaning
    the milk pipework.
    This has been specially developed for
    use with Miele coffee machines and
    prevents subsequent damage.
    The milk pipework cleaning agent is
    available to order from Miele or via the
    internet at www.miele-shop.com.
    ^ Add one sachet of the milk pipework
    cleaning agent to the water
    container.

    ^ Touch "OK".
    You can now only dispense espresso,
    coffee, long coffee and hot water. You
    will only be able to make drinks with
    milk once the milk pipework has been
    cleaned.
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be completed through
    to the end.

    55



  • Page 56

    Cleaning and care
    Milk flask and lid
    It is important to keep the neck and
    flange of the flask clean (whilst filling it
    and carrying it). If the flask is dirty it
    could cause a fault in the machine.
    ^ Clean the milk flask holder on the
    coffee machine with a damp cloth.

    ^ Fill the water container to the 8
    marker with lukewarm water and stir
    the solution.

    ^ Clean the glass milk flask in the
    dishwasher or by hand using hot
    water and a little washing-up liquid.
    Dry the milk flask thoroughly.
    Clean the lid of the milk flask by
    hand only.

    Follow the instructions for the mixing
    ratio carefully. It is important that
    you do not fill the water container
    with too little water, otherwise
    cleaning will be incomplete.
    Carrying out the cleaning process
    ^ Replace the water container in the
    coffee machine and close the front.
    ^ Follow the instructions in the display.
    When "Fill and replace the water
    container" appears:
    ^ Remove the water container and
    rinse it carefully with clean water.
    Make sure that no cleaning agent is
    left in the water container. Fill the
    water container with fresh tap water
    and replace it in the machine.
    The cleaning process is finished when
    "Process finished" appears in the
    display.

    56

    ^ Rinse the milk pipework in the lid
    under running water.
    If when doing this, no water runs out of
    the milk pipework a,
    ^ clean the lid as described in
    "Cleaning blockages from the milk
    pipework - Step 1: Cleaning the milk
    pipework in the lid of the milk flask".



  • Page 57

    Cleaning and care
    Central spout
    Clean the cover of the central spout by
    hand only using hot water and a little
    washing-up liquid. All other parts are
    dishwasher safe
    The central spout must be in the
    maintenance position for cleaning.
    Otherwise you will not be able to
    remove the parts.
    If there is a cup or container
    underneath the central spout, make
    sure that you remove this as it would
    prevent the central spout from
    moving into the maintenance
    position.

    ^ Press catch a upwards, grasp the
    dispensing unit by the handle and
    pull this forwards and off b.

    ^ Touch "Main menu" or #.
    ^ Touch "Maintenance" y.
    ^ Touch "Clean the central spout" and
    follow the instructions in the display.
    The central spout will move into the
    maintenance position a.
    ^ Hold the unit at the sides and pull it
    forwards to release it.

    ^ Pull the cover forwards and off b.

    57



  • Page 58

    Cleaning and care

    ^ Turn upper connecting piece a and
    pull it upwards to remove it. Remove
    lower connecting piece b in the
    same way.
    ^ Pull off dispensers c.
    The Y-piece connector must not be
    removed.

    ^ Reassemble the dispensing unit in
    the reverse order. Make sure that
    upper connecting piece a clicks into
    position. Press dispensers b firmly
    into position.
    Make sure that all parts are tightly
    connected to one another.
    ^ Replace the dispensing unit in the
    central spout.
    ^ Touch "OK".
    ^ Then refit the cover.
    ^ Touch "OK".
    The central spout will now be rinsed
    through.

    ^ Clean all parts thoroughly.
    ^ Clean the surfaces around the central
    spout (see arrow) with a well
    wrung-out damp cloth.

    58



  • Page 59

    Cleaning and care
    Maintenance of the milk valve

    Sensor cover

    The milk valve should be cleaned once
    a week to ensure good quality milk
    froth.

    The sensor cover for the cup protection
    cut-out is located under the central
    spout. If the automatic spout
    adjustment sensors do not clearly recognise a container, this sensor will stop
    the central spout.

    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Maintenance" y.
    ^ Touch "Clean the central spout".
    The central spout and the milk valve will
    move into the maintenance position.

    If required, the sensor cover can be
    cleaned by hand using hot water and a
    little washing-up liquid.

    Important. You must remove the
    cleaning brush before confirming
    "Quit maintenance position" with
    "OK". Otherwise the coffee machine
    will be damaged.

    ^ To remove, press and hold the
    sensor cover between the dispensers
    a. Then press the central spout in
    from the sides b.
    This will release the sensor cover.
    ^ Insert the brush in the milk valve and
    move it back and forth.

    ^ To replace, insert both hooks at the
    back and press the sensor cover
    upwards.

    ^ Touch "OK".
    The milk valve will move into the correct
    position and the milk pipework will be
    rinsed through.

    59



  • Page 60

    Cleaning and care
    Water container

    Waste container

    Change the water every day to prevent
    a build-up of bacteria.

    After a certain period of time a reminder
    to empty the waste container will
    appear in the display. The waste
    container must be cleaned when this
    message appears. However, it is better
    to clean the waste container every day
    to prevent coffee grounds from turning
    mouldy. There will probably also be
    water in the waste container left over
    from the rinsing process.

    Make sure that the valve, the
    underside of the water container
    and the surface the water container
    sits on are clean. Otherwise the
    water container will not sit correctly.
    ^ The water container can be cleaned
    in the dishwasher, or by hand using
    hot water and a little washing-up
    liquid. After cleaning, dry the water
    container.

    ^ Clean the waste container with hot
    water and a little washing-up liquid or
    in the dishwasher, and dry with a
    cloth.
    ^ Also thoroughly clean the now
    accessible area in the machine
    where the waste container sits.

    ^ Carefully clean and dry the surface
    the water container sits on, taking
    special care to clean the recesses
    properly.

    60



  • Page 61

    Cleaning and care
    Drip tray
    Clean the drip tray every day to
    prevent unpleasant odours and
    mildew.
    A prompt will appear in the display
    when the drip tray is full and needs to
    be emptied. Remove the tray and
    empty it at the latest when this prompt
    appears.

    ,Danger of burning.
    If the rinsing process has just
    finished, wait a while before
    removing the drip tray as the water
    used for rinsing will run out of the
    coffee spouts.

    Make sure that the metal contact
    discs on the drip tray are cleaned
    and dried properly. The discs will not
    be able to detect that the drip tray is
    present or that it is full if they are dirty
    or damp.
    ^ Clean the area underneath the drip
    tray.
    ^ Push the drip tray back into the
    coffee machine.
    Make sure the drip tray has been
    pushed right into the machine as far
    as it will go.

    ^ Open the machine front and carefully
    remove the drip tray from the
    machine.
    The grid in the drip tray prevents the
    water from spilling out of the tray
    when it is being carried.
    ^ Clean the drip tray and the grid with
    hot water and a little washing-up
    liquid, or in the dishwasher and dry
    with a cloth.
    61



  • Page 62

    Cleaning and care
    Drip tray cover

    Central spout connector

    ^ Remove the drip tray cover.

    The part which connects the brew unit
    and the central spout is located on the
    inside of the machine front.

    ^ The drip tray cover can be cleaned in
    the dishwasher, or by hand using
    warm water and a little washing-up
    liquid.
    ^ Dry the drip tray thoroughly.

    ^ Clean this connection regularly with a
    damp cloth, taking care not to wipe
    the grease off the cap.
    ^ Refit the cover on the drip tray
    making sure it sits flush at the front.

    Coffee bean container
    ^ Take the coffee bean container out of
    the machine and then push the lid
    back to remove it.
    ^ Clean the coffee bean container and
    the lid by hand using hot water and a
    little washing-up liquid and then dry
    them both thoroughly.
    ^ Replace the lid, and push the
    container back into place in the
    machine.

    62

    ^ Lubricate the cap at least once a
    month with the silicone grease
    supplied.



  • Page 63

    Cleaning and care
    Interior and machine front
    ^ First take out all removable parts and
    then clean the interior and the
    machine front with a mild solution of
    hot water and washing-up liquid.
    Tip: Use your vacuum cleaner to
    remove dry coffee grounds.
    A small drip catcher is located inside
    the front of the machine at the bottom.

    Brew unit
    Clean the brew unit by hand only
    using hot water. Do not use
    washing-up liquid or any other
    cleaning agent.
    The moving parts of the brew unit
    are lubricated. Washing-up liquid or
    cleaning agent will damage the
    brew unit.
    Clean the brew unit once a week.
    Removing and cleaning the brew unit
    by hand
    The brew unit can be removed for
    cleaning. To do this:
    ^ Open the front of the machine.
    ^ Remove the water container, waste
    container and the coffee chute cover.

    ^ Remove the drip catcher and clean it
    in the dishwasher by hand using hot
    water and a little washing-up liquid.
    After cleaning, remember to replace
    the drip catcher in the coffee
    machine.

    ^ Press the button under the handle of
    the brew unit a and, whilst doing so,
    turn the handle clockwise b.
    ^ Press the catch in front of the brew
    unit c downwards, and pull the brew
    unit out carefully.

    63



  • Page 64

    Cleaning and care
    ^ Carefully pull the brew unit out of the
    coffee machine.

    To replace the brew unit, repeat the
    previous steps in the reverse order:

    If you cannot remove the brew unit or
    can only do so with difficulty, the brew
    unit is not in the correct position (See
    "Problem solving guide").

    ^ Push the brew unit back into the
    coffee machine, making sure it goes
    in straight.

    After taking the brew unit out of the
    machine do not change the position
    of the brew unit handle, as this
    would cause the brew unit to be out
    of alignment and you will not be able
    to push it back into the coffee
    machine.
    ^ Clean the brew unit by hand under
    hot running water without using
    washing-up liquid or any other
    cleaning agent.

    ^ Press the button under the handle of
    the brew unit a and, whilst doing so,
    turn the handle to anti-clockwise b.
    ^ Close the front.

    ^ Wipe any remaining coffee off the two
    filters. One filter is located in the
    funnel and the other to the left of the
    funnel.
    ^ Dry the funnel to prevent ground
    coffee sticking to it the next time a
    coffee is prepared.
    ^ Clean the inside of the coffee
    machine. Use your vacuum cleaner
    to remove dry coffee grounds.
    64



  • Page 65

    Cleaning and care
    Degreasing the brew unit
    Depending on the natural oil content of
    the coffee used, the brew unit can
    become blocked quite quickly. It must
    be degreased regularly in order to
    ensure aromatic coffee and trouble-free
    operation of the coffee machine.

    When "Place a cleaning tablet in the
    ground coffee chute and close the
    chute" appears in the display:
    ^ Remove the coffee chute cover and
    open the lid of the coffee chute.
    ^ Place a cleaning tablet into the coffee
    chute.

    We recommend using Miele cleaning
    tablets to clean the brew unit.
    These have been specially developed
    for use with Miele coffee machines and
    prevent subsequent damage.
    Miele cleaning tablets are available to
    order from Miele or via the internet at
    www.miele-shop.com.
    The cleaning process cannot be
    cancelled once it has started. The
    process has to be carried through to
    the end.
    ^ Switch the machine on with the
    On/Off sensor K.
    ^ Touch "Main menu" or the # sensor.

    ^ Close the lid, replace the coffee
    chute cover and close the machine
    front.
    ^ Follow the instructions in the display.

    ^ Touch "Maintenance" y.

    When "Process finished" appears in the
    display:

    ^ Touch "Degrease the brew unit".

    ^ Touch "OK".

    ^ Follow the instructions in the display.

    The brew unit has now been cleaned.

    65



  • Page 66

    Cleaning and care
    Appliance front
    If soiling is not removed promptly it
    could cause the surfaces of the
    machine to alter or
    discolour.Remove any soiling immediately.
    Make sure that water cannot get in
    behind the display.
    All external surfaces are susceptible
    to scratching. Scratches on glass
    surfaces could even cause a
    breakage.
    Contact with unsuitable cleaning
    agents can discolour the surfaces.
    Wipe up any spillages or splashes
    of descaling agent immediately.
    ^ Switch the machine off with the
    On/Off sensor K.
    ^ Clean the front of the machine with a
    clean sponge and a solution of hot
    water and a little washing-up liquid.
    Dry using a soft cloth.
    Tip: You can also use a Miele
    microfibre cloth to clean the front.

    66



  • Page 67

    Descaling
    Limescale builds up in the coffee
    machine through use. How often the
    machine needs to be descaled will
    depend on the water hardness level in
    your area. It should be descaled
    regularly to ensure that it functions
    correctly.

    Descaling after prompt
    appears in the display

    The machine will guide you through the
    descaling process. Various messages
    will appear in the display, e.g. you will
    be prompted to empty the drip tray or
    fill the water container.

    ^ Touch "OK" to start descaling immediately.

    Descaling must be carried out. The
    process takes approx. 20 minutes.

    ^ Follow the instructions.

    During the descaling process, water
    containing descaling agent will run out
    of the central spout and the hot water
    spout. This is followed by an activation
    period before a little more water
    containing descaling agent is
    dispensed.
    The coffee machine will remind you
    when descaling needs to be carried
    out. The following message will appear
    in the display "No. of uses until
    appliance needs descaling: 50". The
    remaining number of drinks that can be
    made before descaling will now show in
    the display after each drink is made.
    ^ Touch "OK" to confirm this message.
    When 0 is reached, the coffee machine
    will lock out. "Descale the appliance"
    will appear in the display.
    You can switch off the coffee machine if
    you do not want to descale it at this
    time. However, you will be not be able
    to make any more drinks until descaling
    has been carried out.

    The descaling process cannot be
    cancelled once you have touched
    "OK". The process has to be
    completed through to the end.

    The process will start and various
    messages will appear in the display.

    When "Fill water container with
    lukewarm water and descaling solution
    up to the F symbol and replace it"
    appears in the display, proceed as
    described below.
    Preparing the descaling solution
    We recommend using Miele descaling
    tablets. These have been specially
    developed for use with Miele
    appliances to optimise the descaling
    process.
    Other descaling agents, which
    contain other acids besides citric
    acid and/or other undesirable
    substances, such as chlorides for
    example, could damage the coffee
    machine. Moreover, the descaling
    effect required could not be
    guaranteed if the descaling solution
    was not of the appropriate
    concentration.

    67



  • Page 68

    Descaling
    Miele descaling tablets are available to
    order from Miele or via the internet at
    www.miele-shop.com.

    Carrying out descaling

    You will need two descaling tablets.

    ^ Follow the instructions in the display.

    ^ Replace the water container in the
    coffee machine and close the front.

    When "Fill the water container with fresh
    tap water up to the descaling symbol
    F" appears in the display:
    ^ Remove the water container and
    rinse it carefully with clean water.
    Make sure that no descaling agent is
    left in the water container. Fill the
    water container with fresh, clean tap
    water up to the k symbol.
    Also empty the waste container.
    ^ Fill the water container to the F
    symbol with lukewarm water.
    ^ Drop two descaling tablets in the
    water.
    Follow the instructions for the mixing
    ratio carefully. It is important that
    you do not fill the water container
    with too much or too little water.
    Otherwise the descaling process will
    be cancelled prematurely.

    The descaling process is finished when
    "Process finished" appears in the
    display.
    ^ Touch "OK".
    The coffee machine has not been
    descaled and can be used for making
    drinks again.
    To protect the machine and
    surrounding surfaces from damage,
    make sure you wipe up any
    spillages or splashes of descaling
    agent immediately.
    The water container and the drip tray
    should be cleaned carefully after
    descaling in order to remove any traces
    of descaling agent.

    68



  • Page 69

    Descaling
    Descaling when not prompted
    by a message
    The descaling process cannot be
    cancelled once you have touched
    "OK". The process has to be
    completed through to the end.
    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Maintenance" y.
    ^ Touch "Descale the appliance".
    The descaling process will now start.

    69



  • Page 70

    Problem solving guide
    With the aid of the following guide, minor problems can be easily corrected
    without contacting Miele.

    ,Warning. Do not open the outer casing of the machine.
    Repairs may only be carried out by a suitably qualified and competent person
    in strict accordance with national and local safety regulations. Repairs and
    other work by unqualified persons can cause considerable danger to users.
    The manufacturer cannot be held liable for unauthorised work.
    If you cannot resolve the problem following these instructions please contact Miele
    (see back cover for contact details).

    Messages in the display
    ^ Follow the instructions to remedy the problem.
    ^ If the fault message appears in the display again, contact Miele.

    Message

    Possible cause and remedy

    Fault 1 - 4
    80 - 83

    There is a fault inside the machine.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for one hour and then switch it back on again.

    Fault 74, 77
    Fault 225, 226
    Fault 235, 236

    There is a fault inside the machine.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.

    70



  • Page 71

    Problem solving guide
    Message

    Possible cause and remedy

    ^ The brew unit cannot move into the correct position or it is
    Fault 73
    dirty and the ground coffee cannot be processed.
    or
    "Check brew unit" ^ Try to remove the brew unit (see "Cleaning and care –
    Brew unit").
    ^ If you can, take it out and clean it (see "Cleaning and care
    – Brew unit").

    Push the coffee ejector of the brew unit into the correct
    position (see illustration).
    ^ Replace the waste container and the water container in the
    coffee machine. Do not replace the brew unit. Close the
    front of the coffee machine and switch the coffee machine
    on with the On/Off sensor K.
    The brew unit motor will now be initialised.
    ^ When "Insert the brew unit" appears, open the front and
    replace all the parts in the machine. Close the front.
    If you cannot remove the brew unit:
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.
    Fault 227 to Fault
    230,
    Fault 233

    There is a fault with the automatic spout adjustment.
    ^ Confirm the message with OK.
    The automatic spout adjustment will be deactivated during
    drink preparation whilst the machine remains switched on.
    You can still make drinks.
    71



  • Page 72

    Problem solving guide
    Message

    Possible cause and remedy

    Fault 234

    The cup protection cut-out has been triggered during the
    making of three drinks since the coffee machine was
    switched on. The cups or glasses being used have not been
    clearly recognised by the automatic spout adjustment
    function.
    ^ Use cups or glasses which can be recognised by the automatic spout adjustment function.
    There is a fault with the automatic spout adjustment.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.

    "Too much ground There is too much ready ground coffee in the ground coffee
    coffee"
    chute.
    If more than one level spoon of ground coffee is added to the
    coffee chute, the brew unit cannot process the coffee. The
    ground coffee will be directed into the waste container and a
    fault message will appear in the display.
    ^ Switch the coffee machine off with the On/Off sensor K.
    ^ Remove the brew unit and clean it (see "Cleaning and care
    – Brew unit").
    ^ Remove the ground coffee in the interior of the coffee
    machine e.g. using a vacuum cleaner.
    Use the coffee spoon supplied for adding ground coffee.
    Add one level spoon only to the ground coffee chute.
    "Push the water
    The water container is not positioned correctly inside the
    container in until it machine.
    engages"
    ^ Remove the water container and replace it.
    This fault message also appears if the water container was
    not correctly filled and positioned for descaling.
    ^ Fill the water container with fresh tap water up to the F
    symbol and start the descaling process again.

    72



  • Page 73

    Problem solving guide
    Unusual performance of the coffee machine
    Problem

    Possible cause and remedy

    When the coffee
    machine is
    switched on the
    lighting does not
    come on.

    The lighting has been switched off.
    ^ Switch it back on (see "Settings - Lighting").

    The display
    remains dark
    when the coffee
    machine is
    switched on using
    the On/Off sensor
    K.

    The On/Off sensor K was not touched for long enough.
    ^ Touch the depression in middle of the On/Off sensor K for
    at least 3 seconds.

    The lighting is faulty.
    ^ Contact Miele.

    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The main fuse has tripped due to a problem with the coffee
    machine, the electricity supply or another appliance.
    ^ Switch off at the wall socket and unplug it.
    ^ Contact a qualified electrician or Miele.

    The coffee
    The switching off time programmed using the timer has been
    machine switches reached.
    off suddenly.
    ^ If required, you can select a new switching off time (see
    "Settings - Timer").
    The plug is not inserted in the socket correctly.
    ^ Insert the plug in the socket correctly and switch on.
    The coffee
    machine is
    switched on. The
    lighting suddenly
    switches off.

    The lighting will switch itself off automatically after 10
    minutes, if the coffee machine is not used for a certain length
    of time.

    The sensors do
    not react to touch.
    You cannot
    operate the coffee
    machine.

    There is a fault inside the machine.
    ^ Open the front of the coffee machine.
    The current process will be stopped.
    ^ Disconnect the machine from the power supply.
    73



  • Page 74

    Problem solving guide
    Problem

    Possible cause and remedy

    The coffee
    machine does not
    switch itself on,
    although the
    "Switch on at"
    setting has been
    activated for the
    timer.

    The system lock is activated.
    ^ Deactivate the system lock (see "Settings - System lock").

    You cannot read
    the display.

    The display brightness has been set too low.
    ^ Adjust the brightness (see "Settings - Brightness")

    After being
    switched on, "Fill
    and replace the
    water container"
    appears in the
    display although
    the water
    container has
    been filled and
    inserted.
    The machine does
    not rinse.

    The coffee machine needs to be descaled.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. one hour.

    The day of the week has not been selected.
    ^ Check the timer settings and change these if necessary
    (see "Settings - Timer").
    The machine was not used after being switched on
    automatically 3 times in succession (see "Settings - Timer").
    ^ Switch the machine on and make a drink.

    ^ Switch the coffee machine on again. As soon as
    "Heating-up phase" appears in the display, touch the
    "Maintenance" field at the bottom right and then select
    "Descale".
    ^ Descale the coffee machine. You may need to repeat the
    descaling process.
    If after this, the fault message appears in the display again,
    contact Miele.

    The milk pipework The milk pipework or the air intake tube is blocked.
    is being rinsed
    ^ Follow the instructions in "Cleaning blockages from the
    through but there
    milk pipework".
    is no rinse water
    coming out of the
    central spout. "Fill
    and replace the
    water container"
    appears in the
    display.

    74



  • Page 75

    Problem solving guide
    Problem

    Possible cause and remedy

    There is no milk or The milk pipework or the air intake tube is blocked.
    milk froth being
    ^ Follow the instructions in "Cleaning blockages from the
    dispensed from
    milk pipework".
    the central spout.
    "Fill and insert milk The lid of the milk flask could be dirty preventing the sensors
    flask" appears in
    from working properly.
    the display
    ^ Clean the milk flask and the lid thoroughly (see "Cleaning
    although the milk
    blockages from the milk pipework").
    flask has been
    filled and inserted
    in the coffee
    machine.
    "Empty the drip
    tray" appears in
    the display
    although the drip
    tray has been
    emptied.

    The drip tray has not been correctly positioned inside the
    machine.
    ^ Push the drip tray back in as far as it will go.
    The sensors on the drip tray are not working properly.
    ^ Switch the coffee machine off with the On/Off sensor K.
    The metal contact discs are dirty.
    ^ Clean and dry the metal contacts thoroughly (see
    "Cleaning and care - Drip tray").

    The machine front The containers are not pushed into the machine completely.
    will not close
    ^ Check the containers.
    properly.
    The hinges are not aligned correctly.
    ^ Adjust the hinges (see "Installation - Adjusting the hinges").
    Drink preparation
    is cancelled.

    If the water container becomes empty while a drink is being
    made, after the water container is filled and replaced
    "Continue? Yes / No" will appear in the display. If you do not
    confirm "Yes" within 5 minutes, the drink will be cancelled.

    75



  • Page 76

    Problem solving guide
    Problem

    Possible cause and remedy

    The container
    being used is not
    recognised by the
    automatic spout
    adjustment
    function
    repeatedly. The
    central spout
    moves to the rim
    of the container
    and triggers the
    cup protection
    cut-out.

    Use other containers which can be recognised by the automatic spout adjustment function.
    There is a fault with the automatic spout adjustment.
    ^ Switch the coffee machine off with the On/Off sensor K.
    Wait for approx. 2 minutes and then switch it back on
    again.
    ^ Use another cup or glass and make a drink.
    If the cup protection cut-out is triggered again or the central
    spout moves to the rim of the cup or glass again, contact
    Miele.

    The cup
    If the cleaning container is very close to or touching the rear
    protection cut-out panel, the automatic spout adjustment will not detect it
    is not working.
    properly.
    The central spout ^ Move the cleaning container slightly further forward.
    moves to the rim
    of the container
    and becomes
    wedged against
    the cleaning
    container or the
    cup or glass.

    76



  • Page 77

    Problem solving guide
    Unsatisfactory results
    Problem

    Possible cause and remedy

    The consistency of The temperature of the milk is too high. Cold milk (below
    the milk froth in
    13 °C) gives the best results for milk froth.
    unsatisfactory.
    ^ Check the temperature of the milk in the milk flask.
    The milk pipework or the air intake tube is blocked.
    ^ Follow the instructions in "Cleaning blockages from the
    milk pipework".
    The coffee grinder The coffee bean container has become empty during the
    makes a louder
    grinding process.
    noise than usual. ^ Fill the container with fresh beans.
    There could be stones in amongst the coffee beans.
    ^ Switch the coffee machine off immediately. Contact Miele.
    Espresso or coffee The coffee is too coarsely ground.
    flows into the cup ^ Set the grinder on a finer setting (see "Grinder setting").
    too quickly.
    Espresso or coffee The coffee is too finely ground.
    flows into the cup ^ Set the grinder on a coarser setting (see "Grinder setting").
    too slowly.
    The cup has not been pre-heated.
    The coffee or
    espresso is not hot
    The brewing temperature has been set too low.
    enough.
    ^ Set a higher brewing temperature (see "Brewing
    temperature).
    The filters in the brew unit are blocked.
    ^ Remove and clean the brew unit by hand (see "Cleaning
    and care - Brew unit")
    ^ Degrease the brew unit (see "Cleaning and care - Brew
    unit")

    77



  • Page 78

    Problem solving guide
    Problem

    Possible cause and remedy

    The crema on the The grinder setting is not correct.
    coffee or espresso ^ Set the grinder on a finer or coarser setting (see "Grinder
    is not as it should
    setting").
    be.
    The brewing temperature is too high for this type of coffee.
    ^ Set a lower brewing temperature (see "Brewing
    temperature").
    The coffee beans are no longer fresh.
    ^ Add new coffee beans to the coffee bean container.

    78



  • Page 79

    Cleaning blockages from the milk pipework
    If you notice that the quality of the milk
    froth is not satisfactory, this could be
    caused by a blockage in the air intake
    tube. Follow the instructions in "Step 2:
    Cleaning the air intake tube and the
    angled connector in the inside of the
    machine front".

    Step 1: Cleaning the milk
    pipework in the lid of the milk
    flask

    If only steam instead of milk flows out
    of the central spout, follow the
    instructions in Steps 1 to 3.
    First check that the milk in the milk
    flask has not gone sour as this can
    block the milk pipework.
    Follow the steps in the cleaning
    procedure below to clean blocked milk
    pipework. After cleaning, check that the
    process for heating and frothing milk is
    working well and that the quality of the
    result is now satisfactory.
    If the process for heating and frothing
    milk is still not working well and the
    quality of the result is still not
    satisfactory, do not make any drinks
    and repeat the steps as described.

    ^ Pull milk suction tube a out of the
    milk flask lid.
    Ensure that you also remove seal b
    when doing this.
    ^ Clean both under running water.
    Insert the cleaning brush supplied
    into the stainless steel tube and move
    it back and forth until all milk deposits
    have been removed.

    ^ Also use the cleaning brush to clean
    the milk pipework in the lid.

    79



  • Page 80

    Cleaning blockages from the milk pipework
    To reassemble the lid:
    ^ First insert the seal in the lid. If you
    cannot insert it properly, try
    moistening the seal with a little water.
    ^ Then insert the milk tube into the
    seal.
    Make sure that the slanted end of
    the milk tube is facing downwards.
    Otherwise the seal would be
    damaged.

    Step 2: Cleaning the air intake
    tube and the angled connector
    in the inside of the machine
    front
    Do not use a needle or similar
    implement. This would damage the
    components.

    ^ First release air intake tube a from
    opening c. Then pull off angled
    connector b.
    ^ Pull both tubes out of the angled
    connector.
    ^ Use the cleaning brush supplied to
    clean air intake tube a. "Blowing
    through" can help to dislodge
    blockages.
    ^ Clean the opening for air intake tube
    c in the inside of the machine front.
    ^ Clean angled connector b under
    running water. If necessary, replace
    with the spare part supplied.
    ^ Insert the brush in milk tube d. Move
    the brush back and forth as far as
    possible until all milk deposits have
    been removed.

    ^ Open the service flap on the back of
    the appliance door.

    80



  • Page 81

    Cleaning blockages from the milk pipework

    ^ Push the tubes back into the angled
    connector and replace this in the
    machine.
    ^ Re-insert the air intake tube into
    opening c.

    Step 3: Maintaining the milk
    valve and cleaning the milk
    pipework in the central spout
    ^ Touch "Main menu" or the # sensor.
    ^ Touch "Maintenance" y.
    ^ Touch "Clean the central spout".
    The central spout and the milk valve will
    move into the maintenance position.
    Important. You must remove the
    cleaning brush before confirming
    "Quit maintenance position" with
    "OK". Otherwise the coffee machine
    will be damaged.

    ^ Insert the brush in the milk valve and
    move it back and forth.
    ^ Remove and dismantle the
    dispensing unit as described in
    "Cleaning and care - Central spout".
    ^ Rinse all parts carefully under
    running water.
    Use the cleaning brush to clean all
    parts carefully with the cleaning
    brush. In order to avoid pushing out
    the silicone parts, do not use a
    needle or similar implement.
    ^ Reassemble the dispensing unit and
    replace it in the central spout.
    ^ Then refit the cover.
    ^ Touch "OK".
    The milk valve will move into the correct
    position and the milk pipework will be
    rinsed through.

    81



  • Page 82

    After Sales / Guarantee
    In the event of a fault which you cannot
    correct yourself, or if the appliance is
    under guarantee, please contact:
    – your Miele Dealer
    or
    – Miele (see the end of this booklet for
    contact details).
    Please note that telephone calls may
    be monitored and recorded for
    training purposes (UK only).

    When contacting your Dealer or Miele,
    please quote the model and serial
    number of your machine. These are
    shown on the data plate inside the
    machine.
    N.B. A call-out charge will be applied
    for service visits where the problem
    could have been resolved as described
    in these instructions.

    Guarantee
    For information on the appliance
    guarantee specific to your country
    please contact Miele. See back cover
    for address.
    In the U.K. your coffee machine is
    guaranteed for 2 years from the date of
    purchase. However, you must activate
    your cover by calling 0845 365 6640 or
    registering online at www.miele.co.uk.

    82



  • Page 83

    Saving energy
    Changing the following settings from
    their factory default will increase the
    energy consumption of the coffee
    machine:
    – Eco mode
    – Lighting
    – Time of day display
    – Timer
    When altering these settings, the
    message "This setting increases energy
    consumption" will appear in the display.

    83



  • Page 84

    Electrical connection U.K., ZA, IRL
    All electrical work should be carried out
    by a suitably qualified and competent
    person only, in strict accordance with
    current national and local safety
    regulations (BS 7671 in the UK).
    Installation, repairs and other work by
    unqualified persons could be
    dangerous. The manufacturer cannot
    be held liable for unauthorised work.
    Ensure power is not supplied to the
    machine until after installation work has
    been carried out.
    The voltage and frequency are given on
    the data plate. Please ensure these
    match the household mains supply. The
    fuse rating is quoted on the plug.

    Non-rewireable plugs BS 1363
    The fuse cover must be refitted when
    changing the fuse, and if the fuse cover
    is lost, the plug must not be used until a
    suitable replacement is obtained. The
    colour of the correct replacement cover
    is that of the coloured insert in the base
    of the plug, or the colour that is
    embossed in words on the base of the
    plug (as applicable to the design of
    plug fitted).
    Replacement fuses should be ASTA
    approved to BS 1362 and have the
    correct rating. Replacement fuses and
    fuse covers may be purchased from
    your local electrical supplier.

    The machine is supplied with a mains
    cable with moulded plug for connection
    to a 230 - 240 V mains supply.

    Do not connect the machine to an
    inverter such as those used with an
    autonomous energy source e.g. Solar
    power.

    Connection should be made via a fused
    plug and suitable switched socket
    which is easily accessible after
    installation.

    When switched on peak loads in the
    system can cause the safety switch off
    mechanism to be triggered. This can
    damage the electronic unit.

    Do not connect via an extension lead.

    The machine must not be used with
    so-called Energy saving devices
    either. These reduce the amount of
    energy supplied to the machine
    causing it to overheat.

    For extra safety it is advisable to protect
    the appliance with a suitable residual
    current device (RCD). Contact a
    qualified electrician for advice.
    If the socket is not accessible after
    installation (depending on country) an
    additional means of disconnection must
    be provided for all poles.
    WARNING: THIS APPLIANCE
    MUST BE EARTHED

    84



  • Page 85

    Installation
    Building-in and combination options
    The machine is designed for installation in a tall unit.

    It can also be combined with other Miele built-in appliances. If the coffee machine
    is to be built in above another appliance, there must be a full-width, closed shelf
    between them (except when it is combined with a suitable Miele built-in plate or
    food warming drawer).
    Some Miele warming drawers can be connected directly to a socket at the rear of
    the coffee machine using a special connection cable (available as an optional
    accessory) so that it can be switched on and off at the same time as the coffee
    machine.
    Only a Miele plate or food warmer can be connected to the coffee machine:
    EGW 4000-29, EGW 5000-14, ESW 6x14, ESW 6x29.

    85



  • Page 86

    Installation
    Ventilation
    Ensure that the back of the coffee
    machine is sufficiently ventilated so that
    steam and warm air can dissipate
    freely.

    To align the machine front with the
    furniture front ensure that there is a
    sealing strip provided all the way
    around the building-in niche or around
    the coffee machine.

    The ventilation gaps in the furniture
    housing unit and the gap between
    the top of the housing unit and the
    ceiling must be at least 200 cm2.
    Otherwise condensation can build up
    and damage the machine or the
    housing unit.

    Installation
    Before installation make sure that
    there is no power supply to the
    machine. This also applies should it
    ever need to be taken out of its
    housing unit.
    The machine must be built in before
    it is operated. It is designed for use
    in ambient temperatures ranging
    from +10 °C to +38 °C.
    You will need two Allen keys (size 3
    and 5) for installing the machine.

    86

    ^ If the housing unit niche is not fitted
    with a sealing strip you should fit a
    Miele sealing strip to the machine
    before installing it. This is fitted from
    the back of the machine.
    This sealing strip is available to order
    from Miele.



  • Page 87

    Installation
    Tip: It is useful to have somewhere at
    the height of the niche to place the
    machine on. This makes electrical
    connection easier.

    ^ Using the large allen key, unscrew all
    four feet underneath the machine out
    by approx. 2 mm.
    The feet can be unscrewed by up to
    approx. 10 mm.

    ^ Open the front of the machine and
    partially tighten the side socket
    screws.

    ^ Carefully turn lower socket screws to
    centre the machine in the niche.
    ^ Tighten both upper socket screws by
    hand to secure the machine in the
    unit. Do not overtighten them.

    ^ Connect the machine to the electrical
    supply.
    ^ Push it all the way into the niche until
    you feel resistance.
    Take care not to damage the
    electrical connection when pushing
    the coffee machine into the niche.
    ^ Check the height of the machine to
    make sure that it is sitting centrally in
    the niche and that it is level. If this is
    not the case, realign the machine
    with using the four feet underneath.
    Four M5 hexagon socket screws are
    supplied for aligning and securing the
    machine in its niche.

    87



  • Page 88

    Installation
    Adjusting the hinges
    If the machine front becomes difficult to
    open or close after installation you can
    adjust the hinges to realign it (TX 20):

    ^ Turn screw a to align the front of the
    machine so that it is flush with the
    front of the housing unit.
    ^ Turn screw b to align the front of the
    machine horizontally and vertically.

    88



  • Page 89

    Miele|home

    a Miele|home communication enabled appliance
    b Miele|home communication module XKM3000Z
    c Miele|home communication enabled Master appliance with SuperVision
    functionality
    d Miele|home Gateway XGW3000
    e WiFi router
    f Connection to a Home automation system
    g Smartphone, Tablet PC, Laptop
    h Internet connection

    89



  • Page 90

    Miele|home
    This appliance a/c is communication
    enabled and can be connected to the
    Miele|home system via a
    communication module b (optional
    accessory) and a conversion kit where
    required.
    The Miele|home system enables
    communication enabled appliances to
    send information via the household
    wiring network to a master appliance c
    such as an oven with SuperVision
    function about their operational status,
    as well as information about the
    progress of the programme.
    Displaying information and
    controlling appliances
    – SuperVision master appliance c
    The status of other signed on
    appliances can be shown in the
    display of some communication
    enabled appliances.
    – Mobile appliance g
    A PC, Notebook, Tablet PC or a
    Smartphone can be used within the
    reception area of a household WLAN
    e to display status information about
    signed on appliances and carry out
    certain functions.
    – Household network f
    The Miele|home system enables
    smart living. The Miele|home
    Gateway d allows other
    communication enabled appliances
    to integrate into the household bus
    system.

    90

    In Germany communication enabled
    appliances can be integrated into
    the QIVICON Smart Home Platform
    instead of the Miele|home Gateway
    (www.qivicon.de).
    SmartStart
    Smart grid enabled appliances can be
    started automatically at a time when
    electricity costs are favourable or when
    a favourable supply of electricity is
    available (e.g. from a solar power
    system).
    Accessories required
    – Communication module XKM3000Z
    – Conversion kit for communication
    system XKV (depending on
    household appliance)
    – Miele|home Gateway XGW3000
    These accessories are supplied with
    their own installation and operating
    instructions.

    Further information
    Further information regarding
    Miele|home is available on the internet
    and in the instruction manuals of the
    various components, e.g. the
    Miele|home Gateway. Please note that
    the Miele@home and SuperVision
    system is currently only available in
    selected countries.



  • Page 91

    Copyright and licences
    Miele uses software to operate and control the coffee machine.
    The copyright authorisation from Miele and other relevant software suppliers (e.g.
    Adobe) must be respected.
    Miele and their suppliers reserve any rights to the software components.
    In particular the following are prohibited:
    – Copying and distribution,
    – Modifications and derivations,
    – Decompilation, reverse engineering, disassembling and other such reductions
    of the software.
    This product contains Adobe® Flash® Player software under licence from Adobe
    Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are
    registered trademarks of Adobe Systems Incorporated.
    Components which fall under GNU General Public Licence and further Open
    Source licences are integrated into the software.
    An overview of the integrated Open Source components and a copy of the current
    licence can be obtained at www.miele.com/device-software-licences. You will
    need to enter the specific product name.
    Miele will provide the source code for all components of software licensed under
    the GNU General Public Licence and comparable Open Source licences.
    For source code requests please email info|miele.com.

    91



  • Page 92

    92



  • Page 93

    93



  • Page 94

    94



  • Page 95

    8QLWHG.LQJGRP
    -IELE#O,TD
    &AIRACRES -ARCHAM2OAD
    !BINGDON /XON /847
    4EL

  • Page 96

    CVA 6800
    en - GB

    M.-Nr. 09 856 380 / 00






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Miele CVA 6800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Miele CVA 6800 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,45 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Miele CVA 6800

Miele CVA 6800 Kurzanleitung - Deutsch - 2 seiten

Miele CVA 6800 Bedienungsanleitung - Deutsch - 92 seiten

Miele CVA 6800 Bedienungsanleitung - Holländisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info