Bedienungsanleitung Multiplex COCKPIT SX (Seite 83 von 84) (Englisch)

561578

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Operating Instructions

Page 81

ENGLIS

You can only check the assignments using the 3-D

digi-adjustor 4 3. The meaning of the displays is

as follows:

0 = function cannot be transferred to the Pupil

1 to 5 = channel used by Pupil transmitter

x R = Pupil signal reversed

1. Move one control at the Teacher transmitter

to one of the two end-points (Quick-Select)

and then return it to centre (e.g. up-elevator).

The screen must show the code for the transmitter

control you have moved. The channel number 0 or

1 to 5 must flash.

Example: throttle comes from channel 4 on the Pupil trans-

mitter, and is reversed.

Functions which can be controlled by the Pupil:

Code Fixed-wing Heli

Aileron Roll

Elevator Pitch-axis

Rudder Yaw

Throttle Collective pitch

Spoiler Throttle Limiter

2. At the Pupil transmitter move the transmitter con-

trol to the same end-point, then return it to centre

(including throttle and spoiler).

3. Repeat steps 1 and 2 until all the desired functions

have been assigned.

The assigning process can be concluded in two ways:

a. with a brief press r on the 3-D digi-adjustor;

the ASSIGN menu re-appears.

b. with a long press ª on the 3-D digi-adjustor;

this takes you to the INFO 1 display. The name of

the selected model alternates with TEACHER.

! Now check the direction of effect of all the

model’s functions which are to be controlled

by the Pupil.

Changing the direction of effect or the assignment

for the Pupil:

a. If you are no longer at the Assign menu:

Move to the ASSIGN menu (see above)

Open the menu with a brief press r on the 3-D

digi-adjustor

b. Repeat steps 1 and 2 (see above).

Erasing the assigned functions:

a. If you are no longer at the Assign menu:

Move to the ASSIGN menu (see above)

Open the menu with a brief press r on the 3-D

digi-adjustor

b. Use the 3-D digi-adjustor (34) to select the con-

trol function; erase the assignment with a long

press ª on the 3-D digi-adjustor (“0” appears next

to the function).

20.3.5. Notes on Trainer mode operations

! The TEACHER button must be held pressed in

all the time the Pupil has control!

! Check all the working systems before take-off!

Check the direction and travel of all functions on

the Teacher and

Pupil transmitters.

! Take care that nothing disturbs the concen-

tration and attention of the Pupil while he or

she is flying the model!

(spectators, other model pilots, ...)

21. Accessories and spare parts

Item Order No.

Channel-Check PLUS, 35 MHz

Channel-Check PLUS, 40 / 41 MHz

# 4 5174

# 4 5175

Transmitter aerial, 140 cm (standard)

# 89 3001

Stub aerial, 35 MHz

Stub aerial, 40 / 41 MHz

# 7 5126

# 7 5127

Aerial ball-joint

# 7 5129

Aluminium stick-tops

# 7 5304

Tx. battery, 6 cells, NiMH, 1500 mAh

# 15 6001

Transmitter case

# 76 3323

Transmitter tray

# 8 5306

PROFI transmitter neckstrap

# 8 5646

Padding for PROFI neckstrap

# 8 5641

“Cross-over” transmitter support strap

# 8 5640

Simulator interface lead, USB

# 8 5153

Trainer lead (straight plug)

Trainer lead (right-angled plug) (Î 20.)

# 8 5121

# 8 5118

For more information regarding accessories and re-

placement parts please refer to the current main cata-

logue or our Internet website: www.multiplex-rc.de.

22. Multi-function socket interfaces

The multi-function socket of the COCKPIT SX has the

following functions:

• Charging / discharging the transmitter battery Î 8.

• Diagnosis mode Î 22.1.

• PC socket for flight simulator Î 22.2.

22.1. Diagnosis mode

A receiver can be controlled from the transmitter via

cable, using what is known as diagnosis mode (direct

servo control), without radiating an RF signal, e.g. if the

channel is already in use by another modeller. Connect

the transmitter (via the MULTIPLEX multi-function

socket) to the receiver (via the charge socket on the

switch harness # 8 5039 or # 8 5046) using the Diag-

nosis lead. Diagnosis mode is only possible with MUL-

TIPLEX receivers which feature a combined battery /

diagnosis socket “B/D”.

The connecting lead required is available from model

shops under the Order No. # 8 5105.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex COCKPIT SX Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex COCKPIT SX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info