Bedienungsanleitung Multiplex COCKPIT SX (Seite 82 von 84) (Englisch)

561578

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

COCKPIT SX

Page 80

2. Connect the Teacher and Pupil transmitters

Locate the plug marked TEACHER and connect it

to the multi-function socket of the C

OCKPIT SX.

Locate the plug marked PUPIL and connect it to the

multi-function socket of the Pupil transmitter.

3. Switch the Teacher transmitter on

Switch on C

OCKPIT SX (Teacher transmitter) only.

Î Both transmitters start working.

Exception: PROFI mc 4000

The PROFI mc 4000 must be switched on using its

own switch. In the interests of safety we recom-

mend that you remove the RF module!

4. Activate PUPIL mode at the Pupil transmitter -

if the transmitter offers this facility Î refer to

the instructions supplied with the Pupil trans-

mitter. If you are using a C

OCKPIT SX and

ROYALevo, select PUPIL or Pupil.

Note:

Reduced operating time for the Teacher transmitter

As the ON / OFF switch on the Pupil transmitter is at

the OFF position, both transmitters are powered from

the Teacher battery. Please note that this reduces the

operating time of the Teacher transmitter.

20.3.2. Activate TEACHER mode

Menu: (

SETUP) TEACHR

Moving to the LEHRER menu:

4 to MENU, r (SETUP appears),

r (MODEL appears), 3 to TEACHR,

r (0 or1 appears), r

The current LEHRER setting flashes in the bottom line:

0 = normal mode

1 = LEHRER mode activated

Select 1, then press the 3-D digi-adjustor briefly r. The

flashing ceases. The selected setting is activated and

stored.

Note: FIX button does not work

As soon as you activate TEACHER mode, the left-hand

button can only be used to transfer control to the Pupil.

The FIX function (fixed values for AILERON, ELEVA-

TOR and RUDDER in the model types GLIDER and

ACRO) cannot be used.

20.3.3. Matching centre settings

Menu: (

SETUP MODEL TEACHR) ADAPT

! Leave the model switched off at this stage!

In this step you adjust the centre settings of the Pupil

transmitter’s control signals to match those of the

Teacher transmitter.

This avoids sudden changes in the control surface

positions when the Teacher switches to the Pupil

transmitter (TEACHER button pressed). Such devia-

tions may occur with centre settings, particularly with

older Pupil transmitters, or those with mechanical trims.

Moving to the ANPASS menu:

4 to MENU, r (SETUP appears),

r (MODEL appears), 3 to TEACHR,

r 3 to ADAPT

Now move all the transmitter controls (sticks incl. throt-

tle, sliders and rotary potentiometers) to centre on the

Teacher and

Pupil transmitters.

Press the 3-D digi-adjustor briefly r to activate the

matching process. MATCH flashes on the screen.

A further brief press r on the 3-D digi-adjustor con-

cludes the matching process. The flashing ceases. The

values are stored, and you are returned to the MATCH

menu.

If you now turn the 3-D digi-adjustor one click to the

right 3, you can continue with assigning the functions

(Î 20.3.4.).

20.3.4. Assigning transmitter controls to the Pupil

Menu: (

SETUP MODEL TEACHR) ASSIGN

! Leave the model switched off at this stage!

Note: the Teacher and Pupil transmitters must be

connected

If no Pupil transmitter is connected,

the COCKPIT SX remains at this

menu: Î

This is the assigning procedure:

! Move all the controls on the Teacher and

Pupil

transmitters to centre (sticks incl. throttle, slid-

ers, rotary potentiometers).

Moving to the ASSIGN menu:

4 to MENU, r (SETUP appears),

r (MODEL appears), 3 to TEACHR,

r (1 must appear)

Note:

If 0 appears, Teacher mode is not yet activated

(Î 20.3.2.). In this case assigning is not possible.

3 to ASSIGN r

Check assignments with After Quick-Select

the 3-D digi-adjustor for Aileron

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex COCKPIT SX Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex COCKPIT SX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info