Bedienungsanleitung Multiplex ROYALevo7 (Seite 73 von 77) (Englisch)

30268

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

ROYAL evo 7

Page 72

quiries to establish which RF module you should use,

and which channels are approved for the region in

which you wish to fly your models.

22.4. Scanner for HFM-S Synthesizer RF

module

# 4 5170 35 MHz A- and B-band

# 4 5171 40/41 MHz band

# 4 5173 36 MHz

# 4 5172 72 MHz

Important: which channels can be used?

Regulations concerning the use of radio-controlled

models vary from country to country. Please make en-

quiries to establish which RF module you should use,

and which channels are approved for the region in

which you wish to fly your models.

The scanner allows you to monitor the frequency band,

and guards against channel clashes. The Scanner mod-

ule is simply plugged into the HFM-S Synthesizer RF

module, and is easy to fit at any time.

The scanner can carry out two tasks:

Checking your channel at power-on (Channel-Check)

The channel you select for the Synthesizer is checked

when you switch the transmitter on. If the channel is al-

ready in use, the Synthesizer stays switched off, and the

user is alerted to the situation by an on-screen warning.

If the scanner picks up no signal during this check, the

transmitter switches itself on in the normal way.

Scanning the whole frequency band

The scanner checks all channels of the frequency band

one by one. All the signals it detects are displayed in bar

graph form on the screen; the height of the bar indi-

cates the signal strength.

Detailed instructions for using the Scanner module for

the HFM-S Synthesizer RF module are supplied with the

module itself.

22.5. Trainer lead

# 8 5121

The ROYALevo7 can be used either as Teacher or Pupil

transmitter in a Trainer (buddy-box) system.

Any MULTIPLEX transmitter fitted with a 5-pin DIN

socket (MULTIPLEX multi-function socket) can be used

as a pupil transmitter. (Î 13.4.)

22.6. Diagnosis lead

# 8 5105

For carrying out adjustments to the model the receiver

can be operated in Diagnosis mode (DSC - Direct Servo

Control) via a cable, without the transmitter radiating an

RF signal, even if “your” channel is already in use. Con-

nect the transmitter (MULTIPLEX multi-function socket)

to the receiver (charge socket on the switch harness

# 8 5039 or # 8 5046) using the Diagnosis lead. Please

note: Diagnosis mode is only possible with MULTIPLEX

receivers which feature a combined Battery / Diagnosis

socket marked “B/D”.

22.7. Other accessories, spareparts

Item

Transmitter case

# 76 3323

Standard transmitter aerial, 110 cm

# 89 3002

Transmitter tray

# 8 5305

SpaceBox ROYALevo Basic transmitter

tray

# 8 5658

SpaceBox ROYALevo weather guard (op-

tional)

# 8 5655

PROFI transmitter neckstrap

# 8 5646

Neckstrap padding for # 8 5646 # 8 5641

“Cross-over” transmitter support strap

# 8 5640

PC lead (Î 23.)

# 8 5156

Receiver module for the MULTInaut IV

channel expansion system (Î 24.)

# 7 5892

For more information on accessories and replacement

parts please refer to the current main catalogue or our

internet website www.multiplexrc.de.

23. PC interface

The multi-function socket on the underside of the

ROYALevo transmitter provides a serial interface to a PC

in addition to the functions of charging, Trainer mode

and Diagnosis mode. This interface offers two functions:

x access to transmitter data

for data back-up, software update

x use with model flying simulators

23.1. Software update / data back-up

The facility to exchange data between transmitter and

PC provides the following possible functions:

x Data back-up

storing (backing-up) model memory data on your PC

x Software update (loading new software into the

transmitter)

The latter point in particular enables you to exploit en-

tirely new methods of updating the transmitter soft-

ware or installing new screen languages via the inter-

net. The PC software “ROYALevo DataManager“ and cur-

rent software updates in various national languages are

already available in the Download area of our internet

website: www.multiplexrc.de.

Important: please check the version of ROYALevo

DataManager you are using.

For the ROYALevo 7 a later version of the ROYALevo-

DataManager is required than is current at the time of

printing of these instructions (V1.06).

The connecting lead (PC lead # 8 5156) is available from

your local model shop.

23.2. Using a flight simulator

The ROYALevo7 can be used directly with many flight

simulators, without further expansion. The manufac-

turers of flight simulators offer special interface cables

for MULTIPLEX transmitters. If you have a query, please

address it to the simulator manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo7 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info