Bedienungsanleitung NAD C 326 BEE (Seite 7 von 16) (Englisch)

493507

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

7 INPUT SELECTORS: These buttons select the active input to the NAD

C 326BEE and the signal sent to the loudspeakers, headphones and the PRE

OUT sockets. The buttons on the remote control handset duplicate these

buttons. When selected, the corresponding input LED indicator embedded

around the bezel of the particular input button will illuminate blue.

MP (MEDIA PLAYER): Selects a line-level source connected to the MP

sockets as the active input.

If an external Media Player is connected to the front MP socket (using

a 3.5mm stereo plug) while listening to a MP line-level source, the

external Media Player will be directly selected with the MP line-level

source immediately disconnected. It is recommended to mute the

volume or switch to a dierent input before plugging/unplugging the

external Media Player cable.

CD: Selects the CD (or other line-level source) connected to the CD

sockets as the active input.

TUNER: Selects the tuner (or other line-level source) connected to the

tuner sockets as the active input.

DISC: Selects a line-level source connected to the DISC sockets.

AUX: Selects a line-level source connected to the AUX sockets as the

active input.

VIDEO: Selects the VCR (or stereo TV/Satellite/Cable receiver)

connected to the VIDEO sockets as the active input.

TAPE MONITOR: Selects the output from a tape recorder when playing

back tapes or monitor recordings being made through the TAPE OUT

sockets in the rear panel. Press the TAPE MONITOR button once to select

it and again to return to the normal input selection.

TAPE MONITOR does not override the current input selection. For example,

if CD is the active input when TAPE MONITOR is selected, then the CD signal

will continue to be selected and sent to the TAPE OUT sockets, but it is the

sound from the recorder connected to TAPE IN that will be heard on the

loudspeakers. Apart from the blue LED to indicate Tape Monitor is engaged,

the blue LED for the active input will also stay lit.

8 TONE DEFEAT: Tone Controls are enabled or disabled by pressing this

button. When enabled (TONE DEFEAT LED indicator is illuminated), the

Tone Control circuits are bypassed. The Tone Control circuits are active

when the TONE DEFEAT LED indicator stays extinguished.

9 TONE CONTROLS: The NAD C 326BEE is tted with BASS and TREBLE

tone controls to adjust the tonal balance of your system. The 12 o’clock

position is “at” with no boost or cut, and an indent indicates this

position. Rotate the control clockwise to increase the amount of Bass or

Treble. Rotate the control counterclockwise to decrease the amount of

Bass or Treble. The Tone controls do not aect recordings made using

the Tape output but will aect the signal going to the Pre-amp output

(PRE OUT).

10 BALANCE: The BALANCE control adjusts the relative levels of the left

and right speakers. The 12 o’clock position provides equal level to the

left and right channels. A detent indicates this position. Rotating the

control clockwise moves the balance towards the right. Rotating the

control counterclockwise moves the balance to the left. The BALANCE

control does not aect recordings made using the Tape output but will

aect the signal going to the Pre-amp output (PRE OUT).

11 VOLUME: The VOLUME control adjusts the overall loudness of the

signals being fed to the loudspeakers or headphones. Turn clockwise to

increase the volume setting; counter clockwise to lower it. The VOLUME

control does not aect recordings made using the Tape output but will

aect the signal going to the Pre-amp output (PRE OUT).

IDENTIFICATION OF CONTROLS

FRONT PANEL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 326 BEE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 326 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info