581050
5
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your C 427 you will nd
An AM loop antenna
A FM ribbon-wire antenna with balun
A detachable AC power cord
An audio cable connector (RCA-to-RCA lead)
The TNR 3 remote control with 2 (two) AAA batteries
Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 427 arrived.
Should you move or otherwise need to transport your C 427, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 23 feet/7
meters, between the C 427’s front panel and your primary listening/viewing
position—this will ensure reliable infrared remote control communications.
Avoid placing the unit in direct sunlight or near sources of heat and damp.
It is perfectly possible to stack the C 427 on top of other components.
QUICK START
In case you simply cannot wait to experience the performance of your
new C 427, we provide the following “Quick Start instructions to get you
underway.
Please make all the connections to your C 427 with the unit unplugged. It is
also advisable to power down or unplug all associated components while
making or breaking any signal or AC power connections.
1 Use the RCA-to-RCA lead to connect the left and right audio output of
the C 427 to the tuner input of your amplier.
2 Connect AM and FM antenna.
3 Connect corresponding end of the AC power cord to the AC mains
input of the C 427 and the plug connected to a mains power source.
The Standby LED indicator embedded around the bezel of the STANDBY
button will illuminate amber.
4 Plug the AC mains plug also of your amplier to a mains power source.
Power up your amplier and set it to the tuner input where the C 427 is
connected.
5 Press the front panel STANDBY button to turn ON the C 427. The
Standby LED indicator will turn from amber to blue and the VFD is
illuminated.
6 Select AM or FM band by pressing corresponding front panel button.
7 Toggle [PRESET/TUNE/SCROLL] control knob to switch between
“Presets” and Tune mode. Select TUNE mode (“Tune is displayed in the
second row of the VFD).
8 Tune to desired station by rotating the [PRESET/TUNE/SCROLL] control
knob.
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD C-427 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD C-427

NAD C-427 Bedienungsanleitung - Deutsch - 12 seiten

NAD C-427 Kurzanleitung - Englisch - 2 seiten

NAD C-427 Bedienungsanleitung - Französisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info