Bedienungsanleitung NAD M 51 (Seite 7 von 14) (Englisch)

493489

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

1 UNBALANCED

• Use a twin RCA-to-RCA lead to connect these sockets to the left and

right analog input of a receiver or amplier.

2 BALANCED

• Connect these XLR connectors to the corresponding XLR input of

professional audio ampliers.

• Ensure that proper pin congurations are followed – Pin 1: Ground,

Pin 2: Positive (signal live) and Pin 3: Negative (signal return).

3 AES/EBU

• Digital audio stream from professional audio sources like SACD/CD

Players or processors can be connected to this XLR connector.

• For high-end sources with higher sampling rates like 176kHz and

192kHz, it is highly recommended that such sources be interfaced

with the AES/EBU IN connector. The AES/EBU IN is well suited to

handle such sources with high sampling rate.

4 COAXIAL, OPTICAL

• Connect COAXIAL and/or OPTICAL to corresponding S/PDIF output

of sources such as CD, DVD or BD players, digital cable box, digital

tuners and other applicable components.

5 USB

• Using Type A to Type B cable connector (not supplied), interface

computer audio to this asynchronous Type B USB input to directly

stream 24/192 content from your PC, MAC or NAS (network-

attached storage).

• In order to stream your computer audio via M51, the “NAD USB

Audio driver” that can be downloaded from the NAD website must

be installed. For more information, refer to the NAD USB AUDIO item

in the USING THE M51 – OTHER FEATURES.

• Most PCs or MACs can automatically detect M51, with “NAD USB

Audio” already available as one of the playback device options in their

respective audio device management settings. Select “NAD USB Audio”

as the playback sound or audio setting on your PC or Mac.

IMPORTANT NOTICE

The use of the NAD USB Audio driver downloaded through the NAD site

is done at the customer’s own discretion and risk. The customer will be

solely responsible for any damage to his/her computer system or loss of

data arising out of or in connection with the use of this software driver.

In no event shall NAD be liable for any direct, indirect, incidental, special,

exemplary, or consequential damages including negligence or otherwise

arising in any way out of the use of this software driver.

6 HDMI (HDMI 1,2; HDMI VIDEO OUT)

• Connect HDMI 1-2 inputs to the HDMI OUT connectors of source

components such as BD/DVD player or HDTV satellite/cable box.

• Connect the HDMI VIDEO OUT to a HDTV or projector with HDMI

input.

NOTE

HDMI 1-2 and HDMI VIDEO OUT function only as direct pass through.

WARNING

Before connecting and disconnecting any HDMI cables, both the M51

and the ancillary source must be powered OFF and unplugged from the

AC outlet. Failure to observe this practice may cause permanent damage

to all equipment connected via HDMI sockets.

7 UPGRADE

• M51 may need a software update to be in step with the latest

technology trends. Check with your authorized NAD distributors for

future software updates. Only authorized NAD distributors or service

centers are allowed to implement a software update.

• Connect to this input a USB memory stick containing the software

update. Use USB adaptor when necessary.

8 +12V TRIGGER OUT

· The +12V TRIGGER OUT is used for controlling external equipment

that is equipped with a +12V trigger input. This output will be

12V when the M51 is ON and 0V when the unit is either OFF or at

standby mode.

9 RS 232

NAD is a certied partner of AMX and Crestron and fully supports

these external devices. Check out the NAD website for information

about AMX and Crestron compatibility with NAD. See your NAD audio

specialist for more information.

• Connect this interface using RS-232 serial cable (not supplied) to

any Windows compatible PC to allow remote control of the M51 via

compatible external controllers.

• Refer to the NAD website for information about RS232 Protocol

documents and PC interface program.

IDENTIFICATION OF CONTROLS

REAR PANEL

2 CHANNEL AUDIO OUT DIGITAL AUDIO INPUT

UNBALANCED

R BALANCED L BALANCED

COAXIALAES/EBU OPTICAL USB HDMI 1 HDMI 2

HDMI VIDEO OUT UPGRADE

+12V TRIGGER OUT

RS 232

+12V TRIGGER

IR IN

POWER

100-240V ~ 50/60Hz

4 5 6 7 8 9 10 11 12 131 2 3

ATTENTION!

Please make sure that the M51 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power

down or unplug all associated components while making or breaking any signal or AC power connections.

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M 51 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M 51

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info