Bedienungsanleitung NAD M 51 (Seite 10 von 14) (Englisch)

493489

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

NAD USB AUDIO

In order to stream your computer audio via M51, ensure that the Sound or

Audio device setting of your computer is set to “NAD Audio 2.0 Output”.

A NAD USB Audio driver can be downloaded via the NAD website link

http://nadelectronics.com/products/masters-series/M51-Direct-

Digital-DAC. Download “NAD USB Audio driver” from the “Manuals/

Downloads” tab. Install this NAD USB Audio driver to your computer by

following the instructions provided.

MINIMUM PC SYSTEM REQUIREMENT

Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7

FOR MAC USERS

Minimum Mac OS X Snow Leopard (version 10.6) and later versions already

include “NAD USB Audio” driver. Update your Mac OS if you cannot locate

NAD USB Audio driver.

IMPORTANT NOTICE

The use of the NAD USB Audio driver downloaded through the NAD site

is done at the customer’s own discretion and risk. The customer will be

solely responsible for any damage to his/her computer system or loss of

data arising out of or in connection with the use of this software driver.

In no event shall NAD be liable for any direct, indirect, incidental, special,

exemplary, or consequential damages including negligence or otherwise

arising in any way out of the use of this software driver.

SETUP MENU

The M51 has the following congurable features. To access these features,

use the following (all function keys mentioned below are with reference to

the remote control).

1 Press [SETUP] and then use [F /D ] to scroll through the following

options - Volume Setup, Auto Standby and Auto Display.

2 Navigation

[F /D] : Scroll up/down the options.

[S] or [ENTER] : Select an option or go to the next layer of options.

[A] : Return to previous page or options.

VOLUME SETUP

The M51 VOLUME control function is dependent upon the “Volume Setup”

menu setting. “Volume” can either be set to “Fixed” or “Variable”. Press

[SETUP] button to launch “Volume Setup” menu. From “Volume Setup”

menu, press [ENTER] or [S] to bring up “Fixed” or “Variable” settings.

Fixed

If “Volume” is set to “Fixed”, audio output level is xed and the M51’s

Volume Control is bypassed.

• Press [D/F] to set a desired preset dB level. Conrm setting by

pressing [ENTER] or [S]. Thereafter, audio output from M51 can be

adjusted by using the volume control of the separate amplier the

M51 is linked into.

• If “Volume Setup” is set to “Fixed”, remote control’s [VOL 5/6] will

have no eect and eectively disabled.

Variable

• When set to “Variable”, the Volume level is directly adjustable using

the remote control’s [VOL 5/6] button. Correspondingly, audio

output from M51 can be adjusted by using the volume control of

the separate amplier the M51 is linked into.

AUTO STANDBY

The M51 has automatic standby mode feature that can be turned ON or

OFF.

On: M51 will automatically go to standby mode if there are no user

interface interaction and no active source within 30 minutes.

O: M51 will not go to standby mode at any time unless directly initiated

by pressing front panel Standby button or remote control’s [OFF] button.

The default setting of Auto Standby is “O”.

AUTO DISPLAY

Auto Display gives the user the option to turn o the Vacuum Fluorescent

Display after 15 minutes of no user interaction and no remote control

command.

Enable: Display is turned o in the absence of any user interaction and

remote control command within 15 minutes. Display wakes up or becomes

illuminated again as soon as there is user interaction or remote control

command.

Disable: Display remains illuminated even in the absence of any user

interaction and remote control command within 15 minutes. This is the

default setting.

POLARITY

Allow compensation for recordings that have reversed polarity.

Positive: A positive sine wave at the input remains positive at the

output. Polarity is defaulted to “Positive” setting.

Reversed: A positive sine wave at the input is negative (inverted) or

reversed at the output.

RENAMING A SOURCE INPUT

A particular source input can be renamed according to your preference.

You can use up to 16 characters in renaming a source input. Below is

the procedure on how to rename a source input. Note that all buttons

mentioned below are with reference to the remote control.

Example: Rename “HDMI 1” to “BD PLAYER”.

1 Press [HDMI 1] button to go to HDMI 1 source. “HDMI 1” is shown in the

upper section of the VFD.

2 Then, press and hold [DISP] button until “HDMI 1” is shown in the upper

section of the VFD and with “H” ashing.

3 Within 5 seconds, toggle the [D/F] buttons to select the rst character

(“B” from the alphabetical list). The ranges of characters available are A-Z,

a-z, _ (space) and 0-9.

4 Press [S] or [ENTER] to select the character and at the same time move

on to the next character. Press [A] to return to the previous character.

Repeat steps 3 and 4 for each character in sequence.

5 Complete the renaming process by pressing the [DISP] button again to

save the new Source input name.

NOTES

The renaming process will be automatically terminated if no button

is pressed within 5 seconds. Any renamed characters at the time of

termination will be not saved.

USING THE M51

OTHER FEATURES

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSK A РУССКИЙ

NAD M 51 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M 51

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info