Bedienungsanleitung NAD M10 (Seite 6 von 14) (Englisch)

745038

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

1 IR IN

• This input is connected to the output of an IR (infrared) repeater

(Xantech or similar) or IR output of another compatible device to

allow control of the M10 from a remote location.

• To program IR Remote commands into your M10 via IR IN, go

to theSettings menu of the BluOS App,selectPlayer and

then IR remote.Simply select the function desired from theIR

Remotemenu, point an IR remote control at the IR repeater and

press the button to perform that function. Once successful, a

check-mark will appear beside the programmed function. You

can now use the IR remote control to command the M10 with the

programmed functions.

2 +12V TRIGGER OUT

• The +12V TRIGGER OUT is used for controlling external equipment

equipped with a +12V trigger input.

• Connect this +12V TRIGGER OUT to the other equipment’s

corresponding +12V DC input jack using a mono cable with 3.5mm

male plug.

• This output will be 12V when the M10 is ON and 0V when it is either

OFF or in standby mode.

3 ANALOG IN 1-2

• Input for line level sources such as CD player, tuner or any

compatible devices. Use dual RCA-to-RCA cable to connect the

source device’s left and right “Audio Output” to these line input

ports.

• The sources will appear as “Analog Input 1” and “Analog Input 2” in

the navigation drawer of the BluOS App.

4 PRE OUT

• Use dual RCA-to-RCA cable to connect PRE-OUT to the

corresponding analog audio input of compatible devices such

as ampliers, receivers or other applicable devices. This makes it

possible to use the M10 as a pre-amplier to such devices.

5 SUBW (SUBWOOFER) 1, 2

• Connect SUBW 1 and/or 2 to the low level input of corresponding

powered subwoofer.

• Low frequency information below the selected crossover setting is

sent to the connected subwoofer.

6 OPTICAL IN/COAXIAL IN

• Connect to corresponding optical and coaxial digital output of

sources such as CD or BD/DVD players, digital cable box, digital

tuners and other applicable components.

7 HDMI ARC

• Connect to TV that supports HDMI Control (CEC) and Audio Return

Channel (ARC) functions. Both functions are possible if external

devices that also support both features are interconnected with

M10 via HDMI connection.

• Use HDMI cable to connect HDMI ARC to corresponding HDMI ARC

port of TV.

• With ARC connection established, M10 will output audio signal

from TV.

IMPORTANT

• Ensure that the audio setting/format of ARC-connected devices to M10

is set to PCM only.

• Only audio output signal from TV is supported by HDMI ARC port. There

is no video output at HDMI ARC port of M10.

8 SERVICE

• These USB port and tact switch are for servicing purposes only. Not

for consumer use.

IDENTIFICATION OF CONTROLS

REAR VIEW

4 5 6 9 8 107 8

11 12 13

21 3

ATTENTION!

Please ensure that the M10 is powered o or unplugged from the mains power outlet before making any connections. It is also advisable to power down or

unplug all associated components while making or breaking any signal or AC power connections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M10 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info