Bedienungsanleitung NAD T 187 (Seite 43 von 48) (Englisch)

493498

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

SUMMARY OF THE HTR 8 MODES

Mode Keys To Press (for 3 seconds)

Learn/Copy/Punch Through Device Key + RES Key

Delete Mode Device Key + RTN Key

Macro Record Macro Key + Function Key

Library Mode Device Key + [A/V PSET] Key

Back Light Timeout DISP Key + Digit Key

Factory Reset See “Factory Reset” above

SLEEP MODE

The Sleep Mode timer will switch the T 187 to Standby mode automatically

after a preset number of minutes. Pressing the HTR 8’s SLEEP button once will

display the setting of the sleep time increment. Pressing the HTR 8’s SLEEP

button a second time within a 3-second period will change the sleep time

increment in 15-minute intervals, after which time the T 187 will automatically

switch into Standby mode.

To adjust the sleep delay, press the HTR 8’s SLEEP button twice; rst to

display the sleep time increment, and a second time to change the

sleep time increment. The sleep time increment and a “SLEEP” icon will

continuously display on the T 187’s front panel Vacuum Fluorescent Display

(VFD). Each consecutive press increases the sleep time in 15-minute

increments from 15 to 90 minutes. To cancel the sleep mode, continue

pressing the HTR 8’s SLEEP button until “Sleep O” displays on the VFD.

Switching the T 187 to standby from either the HTR 8’s OFF or the T 187’s

STANDBY button will also cancel the sleep mode

USING THE ZR 7 REMOTE CONTROL

The ZR 7 is a discrete compact remote for controlling the Zone 2 feature of the

T 187. Irrespective of the main room/zone settings, the ZR 7 allows full separate

control of the Zone 2 source selection among other applicable features.

1 ON/OFF: Switch ON/OFF the Zone feature.

2 SOURCE [ d/f ]: Select the active input of the NAD T 187 that will be

sent out to the corresponding rear panel ZONE 2 output port.

3 MUTE: Temporarily switch OFF or restore the Zone Volume level.

4 VOLUME [ d/f ]: Increase or decrease the loudness level of selected

Zone source. This is possible only if the VOLUME setting of ZONE 2

CONTROLS is set to VARIABLE.

5 PRESET [ a/s ]: Step up or down between stored radio presets. This

control button is possible if the selected Zone is “TUNER” and the active

tuner section has stored presets. This control button is not applicable to

T 187.

6 The following CD Player Zone buttons can control a compatible CD

Player. The CD Player has to be powered ON and disc loaded.

SKIP [ 0 ]: Go to the beginning of a track/le or previous track/le.

SKIP [ 9 ]: Go to the next track/le.

[ 4 ]: Start playback.

NOTE

The ZR 7 remote control will only control Zone 2 applications. Zone3

and Zone 4 could be congured and managed at the appropriate

Zone OSD menu using the front panel navigations keys as well as the

correspondingkeysontheHTR8remotecontrol.TheHTR8’s‘CUSTOM’

device is also defaulted to Zone 2 remote control codes.

OPERATION

USING THE HTR 8 REMOTE CONTROL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 187 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 187

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info