Bedienungsanleitung NAD T 567 (Seite 3 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

20 Replacement Parts - When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufacturer

or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

21 Safety Check - Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

22 Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling

only as recommended by the manufacturer.

23 Heat - The product should be situated away from heat sources such as radiators,

heat registers, stoves or other products (including ampliers) that produce heat.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

CAUTION

This equipment employs a Laser System. To ensure proper use of this product,

please read this owner’s manual carefully and retain for future reference. Should the

unit require maintenance, contact an authorized service location. Use of controls,

adjustments or the performance of procedures other than those specied may result

in exposure to laser radiation. To prevent direct exposure to laser beam, do not try to

open the enclosure. Visible laser radiation when the enclosure is opened.

DO NOT STARE INTO BEAM.

FCC WARNING USA NOTICE

This equipment may generate or use radio frequency energy. Changes or

modications to this equipment may cause harmful interference unless the

modications are expressedly approved in the manual. The user could lose the

authority to operate this equipment if an unathorized change or modication is made.

LABELING INFORMATION

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

RF EXPOSURE STATEMENT

The antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be located or operated in

conjunction with any antenna or transmitter other than those contained in this device.

RESPONSIBLE PARTY

LENBROOK AMERICA

6 Merchant Street

Sharon, MA 02067

USA

Telephone: 800 263 4641; 781 784-8586

Facsimile: 781 784-8386

CANADA NOTICE

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. “To

prevent radio interference to the licensed service, this device is intended to be

operated indoors and away from windows to provide maximum shielding. Equipment

(or its transmit antenna) that is installed outdoors is subject to licensing.”

Operation is subject to the following two conditions :

(1) This device may not cause Interference, and

(2) This device must accept any interference, including interference that may cause

undesired operation of the device.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN

EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE

PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED

TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING

AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE

ACCOMPANYING THE APPLIANCE.

CAUTION

Changes or modications to this equipment not expressly approved by NAD

Electronics for compliance could void the user’s authority to operate this equipment.

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit (from the

largest outer dimensions including projections) that is equal to or greater than shown

below.

Left and Right Panels: 10 cm

Rear Panel: 10 cm

Top Panel: 10 cm

WARNING

If this product is used at 240VAC, a suitable attachment plug should be used.

IMPORTANT SAFETY INSTRUCTIONS

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

CLASSE 1 PRODUIT LASER

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info