Bedienungsanleitung NAD T 567 (Seite 6 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

INTRODUCTION

GETTING STARTED

UNPACKING AND SETUP

WHAT’S IN THE BOX

Packed with your T 567 you will nd:

• The BR 2 remote control with 2 (two) AA batteries

• A detachable AC power cord

• Set of rubber feet

• This owner’s manual version in CD-ROM

SAVE THE PACKAGING

Please save the box and all of the packaging in which your T 567 arrived.

Should you move or otherwise need to transport your T 567, this is by far

the safest container in which to do so. We’ve seen too many otherwise

perfect components damaged in transit for lack of a proper shipping

carton, so please: Save that box!

CHOOSING A LOCATION

Choose a location that is well ventilated (with at least several inches to both

sides and behind), and that will provide a clear line of sight, within 23 feet/7

meters, between the T 567’s front panel and your primary listening/viewing

position. This will ensure reliable infrared remote control communications.

The T 567 generates a modest amount of heat, but nothing that should

trouble adjacent components. It is perfectly possible to stack the T 567 on

top of other components.

DISC LOADING AND PLAYBACK

There are two dierent disc sizes. Place the disc in the correct guide on the

disc tray. If the disc is out of the guide, it may damage the disc and cause

the T 567 to malfunction. “Disc Error” appears at the On-Screen Display

(OSD) (“ERROR” at the VFD), if the disc is placed upside down (and it is a

single sided disc).

The following are important tips when loading a disc:

• Do not push the disc tray while it is moving. Doing so may cause the

T 567 to malfunction.

• Do not push up the disc tray or put any objects other than discs on the

disc tray. Doing so may cause the T 567 to malfunction.

• Keep your ngers well clear of the disc tray as it is closing. Be especially

careful with children’s ngers around the closing disc tray, as there is a

risk of personal injury.

Press [4] (Play), the disc tray is automatically closed. Playback of the rst

track starts if a CD is loaded. For BD, DVD, USB or other disc media, playback

operation is accessible through their menu screen.

NOTE

Do not move the T 567 during playback. Doing so may damage the disc

and the T 567.

ASSEMBLY OF RUBBER FOOT WITH PLASTIC FOOT

QUICK START

In case you simply cannot wait to experience the performance of your new

NAD T 567, we provide the following “Quick Start” instructions to get you

underway.

Please make all the connections to your T 567 with the unit unplugged. It is

also advisable to power-down or unplug all associated components while

making or breaking any signal or AC power connections.

PLAY A BLU-RAY DISC

1 Using a compatible HDMI connector, connect the T 567’s HDMI OUT to

the corresponding HDMI input of your HDMI-compatible TV/monitor.

2 Connect the supplied AC cord to the T 567 AC mains input and then

plug into an AC outlet. Follow the same for your HDMI-compatible TV

as applicable. Switch ON your TV and set it to the HDMI input where the

T 567 is connected.

3 Press the [OPEN/CLOSE] button to switch ON the T 567 and at the same

time open the disc tray.

4 Load the Blu-ray disc in the disc tray.

5 Press the front panel [PLAY/PAUSE] button or [4] (Play) button of

BR 2 remote control to close the disc tray. Depending upon the disc,

playback may commence immediately or you may have to click “Movie”

icon in the “Home Menu” (refer to T 567 default menu screen).

Enjoy the movie but be sure to set aside time to read this manual

thoroughly to set up and congure your T 567 according to your

preference.

Step 1

Insert rubber foot

Squeeze to allow the

rubber foot to clamp under

the six flanges on the

plastic foot

Plastic foot flange

Step 2

Rubber foot inserted

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info