Bedienungsanleitung NAD VISO HP20 (Seite 4 von 8) (Englisch)

602903

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ENGLISH

1 AIRLINE ADAPTOR

• Use the supplied dual 3.5mm airline adaptor to connect your VISO

HP20 with in-flight entertainment systems.

NOTES

• Audio output jack configurations may vary on airplanes. Airline

audio may not equal the high quality sound heard from your

home audio equipment or portable source.

• NAD Electronics does not recommend using these headphones

as aviation communication equipment as they are not engineered

for many environmental conditions common in commercial or

non-commercial aircrafts (including, but not limited to: altitude,

temperature, noise conditions, unpressurized aircraft, etc.)

resulting in possible interference to critical communications.

2 HEADPHONE ADAPTOR (3.5 mm to ¼ inch)

• Use this headphone adaptor to connect your 1/8 inch (3.5mm)

stereo plug to a 1/4 inch (6.3mm) stereo jack.

3 INLINE MICROPHONE AND REMOTE CABLE

• VISO HP20 is equipped with an inline microphone and remote

cable for use with various models of iPod and other iOS devices.

The cable is equipped with a call answer button and other phone

features for effortless switching between music listening and

talking. It also features music and video playback control for iPod,

iPhone and iPad.

• Audio is supported on all iPod models.

• The remote is supported by iPod Shuffle

(3rd generation and later).

• The remote and microphone are supported only by

- iPod nano (4th generation and later)

- iPod Classic (120GB, 160GB)

- iPod Touch (2nd generation and later)

- iPhone 3S, iPhone 4, iPhone 5, iPad and iPad mini

USING APPLE CONTROL FEATURES

FEATURE PROCEDURE

Answer or end call Press the centre button once to

answer or end a call.

Decline incoming call Press and hold the centre button

for two seconds, then release.

There will be two beeps to

indicate successful operation.

Use call waiting To switch to an incoming call and

put an in-progress call on hold,

press the centre button, and

then repeat to switch back to the

previous call and put the new call

on hold.

To switch to an incoming call and

end an in-progress call, press and

hold the centre button for two

seconds. Two beeps will indicate

successful operation.

Activate Siri or voice

control

Press and hold the centre button

for two seconds.

Play/pause song or video Press the centre button to play or

pause the song.

Skip to next/previous song

or chapter

Quickly press the centre button

twice to skip to the next song.

Scan forward through

song or video

Quickly press, then press and

hold the center button to scan

forward. Release to stop scanning

forward.

Scan backward through

song or video

Quickly press twice, then press

and hold the centre button.

Release to stop scanning

backward.

Control Volume Press the ( + ) button to increase

volume. Press the ( - ) button to

decrease volume.

NOTE

Some functions may not be applicable to your iPod or iOS device.

IDENTIFICATION OF PARTS AND ACCESSORIES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO HP20 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO HP20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info