Bedienungsanleitung NAD VISO HP30 (Seite 4 von 8) (Englisch)

745049

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

1 STANDARD HEADPHONE RIBBON CABLE

• For a complete listening experience on most devices, use the

standard headphone ribbon cable. Plug the “L” (left) end of the cable

into the corresponding input at the bottom of “L” (left) ear pad and

“R” (right) end of the cable into the corresponding input at the

bottom of the “R” (right) ear pad. Connect the other end into the

1/8” (3.5mm) stereo socket on your music player.

• A 1/4" (6.3mm) adaptor is also included for connecting to other

audio equipment.

NOTES

• Grasp the plug at the end of the cable and pull to disconnect. Never

pull on the headphone cable to disconnect the headphones from the

music player.

• Turn the volume down to a comfortable listening level on your music

player before putting on VISO HP30.

• Each swiveling arm of the VISO HP30 headband has “L” and “R” mark

indicating the left and right sides respectively of the headphones.

IMPORTANT CONNECTION OF THE HEADPHONE RIBBON CABLE

TO CORRESPONDING EAR PAD*

2 HEADPHONE ADAPTOR (3.5 mm to ¼ inch)

• Use this headphone adaptor to connect your 1/8 inch (3.5mm)

stereo plug to a 1/4 inch (6.3mm) stereo jack.

3 AIRLINE ADAPTOR

• Use the supplied dual 3.5mm airline adaptor to connect your VISO

HP30 with in-ﬂight entertainment systems.

NOTES

• Audio output jack congurations may vary on airplanes.

Airline audio may not equal the high quality sound heard from your

home audio equipment, or a portable source.

• NAD Electronics does not recommend using these headphones

as aviation communication equipment as they are not engineered

for many environmental conditions common in commercial

or non-commercial aircrafts (including, but not limited to: altitude,

temperature, noise conditions, unpressurized aircraft, etc.) resulting

in possible interference to critical communications.

4 INLINE MICROPHONE/REMOTE CABLE

• VISO HP30 includes an inline microphone and remote cable for use

with iPod and other iOS devices. The cable is equipped with a call

answer button and other phone features for eﬀortless switching

between music listening and talking. It also features music and

video playback control for iPod®, iPhone® and iPad®.

• Audio is supported on all iPod models. The remote is supported by

iPod Shuﬄe (3rd generation and later).

• The remote and microphone are supported only by

• iPod nano (4th generation and later)

• iPod Classic (120GB, 160GB)

• iPod Touch (2nd generation and later)

• iPhone (3G and later)

• iPad (3rd generation and later)

• iPad mini (1st generation and later)

• iPad Air, iPad Air 2

• Plug the “L” (left) end of the cable into the corresponding input at

the bottom of “L” (left) ear pad and “R” (right) end of the cable into

the corresponding input at the bottom of the “R” (right) ear pad.

Connect the other end into the 1/8” (3.5mm) stereo socket on your

music player.

IDENTIFICATION OF PARTS AND ACCESSORIES

L R : R L =

EAR PAD

AUDIO OUTPUT



HEADPHONE

CABLE



L L : R R =

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO HP30 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO HP30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info