Bedienungsanleitung One for All URC 5650 Cinema 5 (Seite 7 von 10) (Englisch)

492766

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

SETTING UP OTHER COMPONENTS

In addition to the components labeled on the device keys (TV, VCR, DVD/LD,

CBL/SAT, etc.), the

Cinema 5

can also operate the following components:

Cassette Decks, Video Accessories, Amplifier and Miscellaneous Audio

Components (Graphic Equalizers and Digital Music Service Boxes).

The Setup Codes for these components can be accessed under the following

device keys:

Cassette Decks: Use the VCR Key

Video Accessories: Use the CBL/SAT Key

Amplifier: Use the RCVR Key

Miscellaneous Audio: Use the RCVR Key

For example, to set up a Cassette Player on the VCR key:

1. Turn on your Cassette Player and insert a tape.

2. Press VCR and release. Press and hold SETUP until the

Cinema 5’

s red light blinks twice, then release

SETUP.

3. Enter the first four-digit Cassette Player code listed for your

brand in the “Setup Codes For Audio Cassettes” section. If

you perform this procedure correctly, the red light will blink

twice when you enter the final digit of your code.

4. Aim the

Cinema 5

at your Cassette Player and

press PL (Play). Your Cassette Player should play your

tape. If your Cassette Player does not respond, repeat

steps 2-4, trying each code listed for your brand until you

find the one that operates your Cassette Player.

5. Your

Big Easy HT Plus

is now programmed to operate your

Cassette Player.

Remember, if you want to use your

Cinema 5

to operate your Cassette Player,

press the VCR key first.

Setup Codes For Audio Cassette Decks

Aiwa 0029, 0197

Carver 0029

Denon 0076

Harman/Kardon 0182

JVC 0244, 0273

Kenwood 0070

Magnavox 0029

Marantz 0029

Onkyo 0135, 0282

Optimus 0027, 0220

Philips 0029

Pioneer 0027, 0099, 0220

Sansui 0029

Sony 0170, 0243, 0291

Technics 0229

Victor 0273

Wards 0027

Yamaha 0094, 0097

Setup Codes For Video Accessories

Archer 0160

GC Electronics 0160

Jebsee 0160

Rabbit 0081

RadioShack 0160

Roctec 0456

SuperGuide 0169

TeleCaption 0171

Setup Codes For Integrated Amplifier/Preamplifiers/

Amplifiers

Carver 0269

Curtis Maths 0300

Denon 0160

GE 0078

JVC 0331

Linn 0269

Luxman 0165

Magnavox 0269

Marantz 0269, 0321

Nakamichi 0321

Optimus 0013, 0300, 0395

Panasonic 0308

Pioneer 0013, 0300

Realistic 0395

SEARCHING FOR YOUR CODE

If your TV, VCR or Cable Converter does not respond to the

Cinema 5

after

trying all of the codes listed for your brand, or if your brand is not listed at all, try

searching for your code. For example, after trying all of the codes for your TV,

you still cannot get the

Cinema 5

to operate your TV, then:

1. Turn on your TV.

2. Press TV and release. Press and hold SETUP until the

Cinema 5

's red light blinks twice, then release SETUP.

3. Press 9 - 9 - 1.

4. Slowly alternate between pressing POWER* and TV until

your TV turns OFF. Make sure that the

Cinema 5

is aimed at

your TV during the search. You may have to press this

sequence of buttons (POWER* then TV) up to

100 times to search the entire library of codes.

5. When your TV turns OFF, press and release SETUP to

lock in the code for your TV. Your

Cinema 5

is now

programmed to operate your TV.

*Some VCR, LD or DVD player do not have POWER key on the original remote.

If so turn on the VCR/DVD/LD player manually, insert a tape or CD and start

playing. Start the code search process and use STOP key instead of POWER.

When the device responds, press and release the SETUP key to lock in the

code. RED LED will blink twice.

NOTE: To search for the codes of your other components, repeat Steps 1

through 5, only substitute the appropriate device key (VCR, DVD/LD, RCVR or

CBL/SAT) for the component you are searching for.

RETRIEVE THE CODES PROGRAMMED IN THE

Big Easy HT Plus

If you have set up the

Cinema 5

using the “SEARCHING FOR YOUR CODE”

procedure, you may want to figure out which four-digit code is operating your

equipment. Use this procedure after you have set up your components to find

out which four-digit code is operating your equipment. For example, to find out

which code is operating your TV after setting up your TV using the “SEARCH-

ING FOR YOUR CODE” procedure:

1. Press TV and release. Press and hold SETUP until the

Cinema 5

’s red light blinks twice, then release SETUP.

2. Press 9 - 9 - 0.

3. For the first digit of your four-digit code, press 1 and count

the number of times the red light (LED) blinks on the

Cinema 5

. If the light does not blink when you press the

number 1, the digit is zero.

4. For the second digit, press 2 and count the number of

times the red light (LED) blinks on the

Cinema 5

. If

9-9-0

the light does not blink when you press the number 2, the

digit is zero.

5. For the third digit, press 3 and count the number of times

the red light (LED) blinks on the

Cinema 5

. If the light

does not blink when you press the number 3, the digit

is zero.

6. For the fourth and final digit, press 4 and count the number

of times the red light (LED) blinks on the

Cinema 5

If the light does not blink when you press the number 4, the

digit is zero. Now you have your four-digit code.

NOTE: To find out the code for your other components, repeat Steps 1

through 6, only substitute the appropriate device key (VCR, DVD/LD,

RCVR or CBL/SAT) for the component code you wish to learn.

9-9-1

One for All URC 5650 Cinema 5 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info