Bedienungsanleitung One for All URC 5650 Cinema 5 (Seite 9 von 10) (Englisch)

492766

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Now, whenever you press VOL▲, VOL▼ or MUTE on the

Cinema 5

each

component will control its own volume, provided each component has volume

control.

USING THE SLEEP KEY

The SLEEP key allows you to access the sleep timer of your TV, Cable Con-

verter/DBS Satellite or Audio component. You can access your TV, Cable

Converter, DBS Satellite or Audio component’s Sleep Timer by pressing the

SLEEP key. Most Sleep Timers advance in increments of 10 or 15 minutes,

however, for specific instructions on setting your components Sleep Timer,

please consult your original owner’s manual.

Even if your original Cable Converter remote control did not have a sleep timer,

your

Cinema 5

has its own built-in sleep timer. If your Cable Converter does not

have a sleep timer, press the SLEEP key to activate the

Cinema 5

’s built-in

sleep timer. For example:

1. Press and release the CBL/SAT key then press the SLEEP

key once to set the

Cinema 5

’s built-in sleep timer

for 15 minutes. The red light will blink once.

2. Each additional press of the SLEEP key will add 15 more

minutes to the Sleep Timer, up to a maximum of 60

minutes. The LED will blink twice when the sleep timer is

set for 30 minutes, 3 times for 45 minutes, or 4 times for 60

minutes.

NOTE: The sleep timer starts 10 seconds after the last press of the SLEEP key.

Once you have activated the Cinema 5’s built-in sleep timer, you must keep the

remote control aimed directly at the component.

3. To de-activate the built-in sleep timer, press POWER.

NOTE: Plugging your TV into the outlet on the back of the Cable Converter may

allow you to turn both your Cable Converter and your TV ON and OFF.

SETTING THE CLOCK

CHANGING CLOCK DISPLAY MODE

The clock is preset to display the hour and minute. To change the display mode :

1. Press MODE key, the display will change to month and

day. The display will return to hour and minute if no key is

pressed within 2 seconds.

2. Press MODE key again within 2 seconds, it will display

second on the right two digits.

3. Press MODE key again, it will be go back to display hour

and minute.

NOTE : At any of the above modes, press SET key will enter the clock setting

mode.

SETTING UP THE CLOCK

Follow below steps to set the current time and day.

1. Press SET key to enter clock setting mode.

Note : If the SET key is pressed at hour and minute or at month and day display

mode, the display will show hour and minute for two seconds and then display

month and day for the next two seconds , then back and repeat again. If the

SET key is pressed at second display mode, the display will remain to display

the second.

2. Press SET key to enter month setting mode.

3. Press MODE key to advance the month.

4. After setting the month, press SET key to

enter day setting mode.

5. Press MODE key to advance the day.

6. After setting the day, press SET key to enter

hour setting mode with A or P in the

rightmost digit to indicate AM or PM, press

MODE key to advance the hour.

7. After setting the hour, press SET key to

enter minute setting mode.

8. Press MODE key to advance the minute.

NOTES:

i. At each of the setting mode, continue to press the MODE key more than

1 second will let advancing automatically.

ii. If minute is not advancing in the set sequence, press SET key in the

minute setting mode, it will exit clock setting mode and commence time

keeping.

iii.Advancing minute will reset second to 00 and suspend timekeeping.

9. After finish the minute, to exit the clock setting mode, press

SET and then MODE key to commence timekepping.

10. If required to set month, day or hour again after setting the

minute, press SET key twice and repeat step 2-9.

MONTH

DAY

HOUR A/P

MINUTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All URC 5650 Cinema 5 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info