612785
12
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
12
RQT9658
Others
To check the Wi-Fi
®
signal strength where the unit
is located.
Preparation
Turn the unit on.
Connect this unit to the wireless network. (> 6)
1 If this unit is in use, stop the AirPlay
playback to this unit.
Wait for at least 15 seconds before
proceeding to step 2.
2 Press and hold both [– VOLUME] and
[VOLUME i] on this unit for more than 2
seconds.
3 The operation indicator lights and then
blinks a set number of times.
Count the number of times the indicator
blinks.
A stable connection is available when the
operation indicator blinks 3 times.
Change the position or angle of your wireless network
router or the unit in the following cases:
– The operation indicator only blinks 2 times or 1 time.
– The sound is interrupted.
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
Preparation
Turn the unit on.
Connect this unit to the wireless network. (> 6)
jMake sure that the wireless network is
connected to the Internet.
1 Press and hold both [– VOLUME] and
[– WPS] on this unit for more than 2
seconds.
{. The operation indicator (> 4) blinks.
2 The operation indicator lights when the
update has finished successfully.
If the software update is not required, the
operation indicator turns off.
3 Disconnect the AC adaptor and reconnect
it after 3 minutes.
Downloading will require several minutes. It may
take longer or may not work properly depending on
the connection environment.
If the update is unsuccessful, the operation indicator will
blink in a specific sequence.
Wi-Fi
®
signal strength Software update
DO NOT DISCONNECT the AC adaptor while
this unit is updating.
During the update process, no other operations can be
performed.
If the update is unsuccessful, the operation indicator
will blink in a specific sequence. (> below)
No. of blinks Problems and solutions
3
The software download has failed.
Please try again later.
The server cannot be found. Make
sure that the wireless network is
connected to the Internet.
2
This unit cannot connect to the
network. Check the network
connection.
1
The update has failed. Turn this unit
off and remove the AC adaptor.
Reconnect the AC adaptor and try
again.
SC-AP01EBGN~RQT9658.book Page 12 Thursday, March 22, 2012 5:11 PM
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SCAP01EB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info