Bedienungsanleitung Panasonic SCAP01EB (Seite 13 von 16) (Englisch)

612785

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Operations

Reference

RQT9658

Troubleshooting

Before requesting service, make the following

checks. If you are in doubt about some of the check

points, or if the solutions indicated in the following

guide do not solve the problem, consult your dealer

for instructions.

Do you have the latest software installed?

≥ Occasionally, Panasonic may release updated software for

this unit that may add or improve the way a feature operates.

(> 12)

Humming heard during play.

≥ An AC mains lead or fluorescent light is near the cords. Keep

other appliances and cords away from this unit’s cables.

The power on indicator blinks red.

≥ The unit has been left unused for about 30 minutes and will

shut down in a minute. Press any button to cancel it. (> 11)

The device connected to the USB port is not

charging.

≥ Is this unit turned on? If not, turn this unit on. (> 4)

Even if the charge is not complete, charging will stop if the

automatic standby is activated.

Set “AUTO OFF” to “OFF” for continuous charging. (> 11)

Cannot connect to the network.

≥ Confirm the network connection and settings. (> 6)

≥ Your wireless network might be set to be invisible. In this

case select “Manual settings” in “Method 2”. (> 7)

≥ This unit cannot join a wireless network using WEP security

settings with the WPS methods (“Method 1”). Use “Method 2”

to join the wireless network. (> 7)

≥ Make sure that the multicast function on the wireless network

router is set to on (enabled).

My wireless network router is WPS PBC

compatible, but the pairing does not work.

≥ If the network is set to be invisible, the push button

configuration does not work. In this case, either make the

wireless network visible while you set up the network for this

unit or use “Method 2”. (> 7)

The Wi-Fi

status indicator continues to blink red.

≥ The Wi-Fi

status indicator will blink red when this unit is

connecting to the wireless network. Once it is connected to

the wireless network it will light blue.

If it continues to blink red, check the wireless network

settings. (> 6)

Cannot connect to the unit.

≥ Make sure that this unit is on the same wireless network as

the device you are trying to use. (> 6)

≥ If “NET STANDBY” is set to “OFF”, the AirPlay compatible

device cannot be connected when this unit is off.

≥ Set “NET STANDBY” to “OFF” (> 11), turn off the Wi-Fi

setting on the AirPlay compatible device, and then turn this

unit off and on. Reconnect the compatible device to the

Wi-Fi

network and then select this unit as the AirPlay

speakers again.

Playback does not start.

The sound is interrupted.

≥ Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions. Increase the distance between this

unit and these devices.

≥ Do not place this unit inside a metal cabinet, for it might block

the Wi-Fi

signal.

≥ Place this unit closer to the wireless network router.

≥ If several wireless devices are simultaneously using the

same wireless network as this unit, try turning off the other

devices or reducing their wireless network usage.

≥ With some iOS and iTunes versions, it may not be possible

to restart the AirPlay playback if the unit is turned off during

the AirPlay playback.

In this case, select a different device from the AirPlay icon of

the Music app or iTunes and then re-select this unit as the

output speakers. (> 9)

≥ If the playback stops, check the playback status on the iOS

device or iTunes.

≥ If play does not start (even though the Wi-Fi

status indicator

lights blue and the AirPlay icon is displayed), restart the

wireless network router, turn the Wi-Fi

connection on the

iOS device or Mac/PC off and on, and then make sure that

your home wireless network is selected.

To return all settings to the factory preset

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at

least 3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

main unit, reconnect the AC mains lead.

≥ Keep [Í/I] held down until the operation indicator

(> 4) blinks 4 times. (Approx. 10 seconds.)

3 Release [Í/I].



All the settings are returned to the factory preset. You will

need to reset the memory items.

Common problems

Network

AirPlay operations

SC-AP01EBGN~RQT9658-2B.book Page 13 Friday, June 15, 2012 10:44 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAP01EB Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info