Bedienungsanleitung Philips 21PV288 (Seite 7 von 12) (Englisch)

33203

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

1 Insert a cassette into the cassette slot.

2 Press the

GPLAY

playback button.

3 Picture search: Now press the

(rewind) or

(wind) button once or several times.

4 Interrupt: Press the

STOP h

button.

5 Wind: Stop the tape and press the

(rewind) or the

(wind) button.

6 Eject: Press the

button on the set.

Note: Some functions switch off automatically after a

while (e.g.: Pause, Still Picture, Scanning). This helps to

protect the cassette and prevent unnecessary power

consumption.

* With this set you can play back cassettes that have

been recorded on another TV combi in the NTSC

standard.

* If you load a cassette with erase protection, the TV

Combi starts playback automatically.

* The picture quality is affected during scanning. The

sound is switched off.

* Remove the cassette before transporting the TV

Combi.

Still picture

1 Press the

STILL R

button. You see a still picture.

Interference stripes will appear.

Each time you press the

STILL R

button again the pic-

ture will move on one step.

Continuous playback

1 Press the

button.

2 Select and confirm the ’SPECIAL’ line.

3 Select the ’REPEAT PLAY’ line. Switch on the continuous

playback.

4 Press the

button.

5 Start the continuous playback with the

GPLAY

playback

button.

6 If you want to cancel the function, stop the continous

playback in the ’REPEAT PLAY’ line.

Tape position/Index search

Tape position: If you press the

button the tape position

will be shown in the display during Wind, Rewind, Record,

Playback and Pause/Stop.

Index search: Every time you start to record, the tape is

marked with a code mark.

1 Press the

INDEX E

button. Press the

button to

select the next code mark or the

button for the

previous code mark.

2 Once the TV Combi finds the code mark or unrecorded

area it will automatically switch to playback.

Note: When you press any tape transport button (e.g.:

the

button) this search function will be

stopped.

* You cannot use this function with recordings made on

another video recorder that does not have this function.

Eliminating picture interference

1 During playback press the

button.

2 Select and confirm the ’SPECIAL’ line.

3 Select the ’TRACKING’ line.

4 Press the

button until the playback

quality is at its best.

5 Press the

button. This setting will remain until

you remove the cassette.

6 Cleaning function: Press the

button.

7 Select and confirm the ’SPECIAL’ line.

8 Select the ’CLEANING’ line.

9 Press the

button. A blue screen appears for a few

seconds.

0 Wait until the blue screen disappears and press the

button.

Note:

* Some hired cassettes may have a poor picture/sound

quality. This is not a fault in your set.

2. PLAYBACK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 21PV288 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 21PV288

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info