Bedienungsanleitung Philips 21PV288 (Seite 8 von 12) (Englisch)

33203

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

1 Insert a cassette.

2 Use the

P p

button to select the programme number

from which you wish to record, e.g.: ’P 01’ .

3 Press the

RECORD n

button.

4 Use the

STOP h

button to stop the recording.

5 If, whilst recording, you want to switch off the TV screen,

press the

STANDBY m

button once.

To switch the TV screen on again, press the

P p

button.

Important notes for recoding

• OTR: If you do not want to record to the end of the

cassette, press the

RECORD n

button again. The display

shows at what time the recording will stop.

With the

or the

button you can change the

end time of the recording in 30 minute intervals.

If you wish to cancel the end time, press the

CLEAR

button. This does not effect the recording.

• Programme number ’E1’ is provided for recording from

external sources (via the

EXTERNAL

scart socket).

• Programme number ’AV’ is provided for recording from

external sources (via the front socket).

• Erase protection: So that you don’t accidentally delete an

important recording, you can remove the special tab

(erase protection) on the narrow side of the cassette with

a screwdriver or slide the special tab to the left.

Later, if you no longer want the cassette to be erase

protected, you can seal the gap again with adhesive tape

or slide the special tab to the right.

• Auto-assembling: You can use the auto-assembling func-

tion to join individual recordings without any major

picture disturbance between the recordings.

Search for the correct position on the tape and then stop

the playback by pressing the

STOP h

button. ’PAUSE’

appears in the display.

Now start recording as usual by pressing the

RECORD n

button.

• Long play: Before recording, press the

button.

Select and confirm the ’SPECIAL’ line.

Select and confirm the ’TAPE SPEED’ line.

Select the ’LP’ (=LongPlay) recording speed and stop by

pressing the

button.

During playback the TV Combi will automatically select

the correct playback speed.

Programme a recording

The set needs the following information for every pro-

grammed recording:

* the date on which the recording is to be made

* the programme number for the TV channel

* the start and end time of the recording

* VPS/PDC on or off

The set stores all the information mentioned above in what is

known as a TIMER block. It can store 6 TIMER blocks for up

to one month in advance.

’VPS’ (Video Programming System)/ ’PDC’

(Programme Delivery Control)

With ’VPS/PDC’, the TV station controls the start and the

duration of a programmed recording. This means that the

video recorder switches itself on and off at the right time

even if a TV programme you have programmed begins earlier

or finishes later than expected.

Usually the start time is the same as the ’VPS/PDC’ time. If,

however, a different ’VPS/PDC’ time is given, e.g.: ’20.15

(VPS/PDC 20.14)’, you have to enter ’20.14’ (the ’VPS/PDC’

time) exactly to the minute.

If you are not using ’VPS/PDC’, the ’VPS/PDC’ indication must

be off.

3. RECORD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 21PV288 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 21PV288

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info