Bedienungsanleitung Philips DVDR615 (Seite 2 von 71) (Englisch)

1065

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

3139 246 14134

CAUTION

Use of controls or adjustments or

performance of procedures other than

herein may result in hazardous radiation

exposure or other unsafe operation.

Important notes for users in the

U.K.

Mains plug

This apparatus is fitted with an approved 13

Amp plug. To change a fuse in this type of plug

proceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be a BS1362 5 Amp,

A.S.T.A. or BSI approved type.

3 Refit the fuse cover.

If the fitted plug is not suitable for your socket

outlets, it should be cut off and an appropriate

plug fitted in its place.

If the mains plug contains a fuse, this should

have a value of 5 Amp. If a plug without a fuse

is used, the fuse at the distribution board

should not be greater than 5 Amp.

Note: The severed plug must be disposed of to

avoid a possible shock hazard should it be

inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with

the following code: blue = neutral (N),

brown = live (L).

¶ As these colours may not correspond with the

colour markings identifying the terminals in

your plug, proceed as follows:

– Connect the blue wire to the terminal

marked N or coloured black.

– Connect the brown wire to the terminal

marked L or coloured red.

– Do not connect either wire to the earth

terminal in the plug, marked E (or e) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain

that the cord grip is clamped over the sheath

of the lead - not simply over the two wires.

Recording and playback of material may

require consent. See Copyright Act 1956 and

The Performer’s Protection Acts 1958 to 1972.

LASER

Type Semiconductor laser

InGaAlP (DVD)

AIGaAs (CD)

Wave length 658 nm (DVD)

790 nm (CD)

Output Power 30 mW (DVD+RW write)

1.0 mW (DVD read)

1.0 mW (CD read)

Beam divergence 84 degrees (DVD)

61 degrees (CD)

This product complies with the radio

interference requirements of the

European Community.

Manufactured under

license from Dolby

Laboratories. “Dolby”

and the double-D symbol are

trademarks of Dolby Laboratories.

This product complies with

the requirements of the

following directives and

guidelines: 73/23/EEC +

89/336/EEC + 93/68/EEC

For Customer Use:

Read carefully the information located at

the bottom or rear of your DVD Recorder

and enter below the Serial No. Retain this

information for future reference.

Model No. DVD RECORDER DVDR610 /

DVDR615 / DVDR616

Serial No. _______________

Due to the inconsistency of disc formats provided

by various disc manufacturers, your DVD system/

player/recorder may require a playability

enhancement or upgrade. As DVD technology

advances, these enhancement will become

common and will be easy to complete.

Go to www. p4c.philips.com for software upgarde.

CAUTION

VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AVOID

EXPOSURE TO BEAM

1DVDR6xx_Eng05_14134c 9/28/04, 1:00 PM2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR615 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR615

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info