Bedienungsanleitung Pioneer 506 fde (Seite 36 von 141) (Deutsch, Englisch, Französisch)

140418

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

Useful Adjustment Settings

Switching the vertical drive frequency

You can switch the vertical drive frequency for screen display

between 75 Hz and 100 Hz. Choose the drive frequency that

better suits your broadcasting signals.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Drive Mode” ( / then ENTER).

4 Select 75 Hz or 100 Hz ( / then ENTER).

5 Press HOME MENU to exit the menu.

NOTE

• This setting can be made for each input source separately.

• This setting cannot be made when 480i, 480p, 1080i@60Hz,

720p@60Hz, or 1080p@24Hz signals are input.

• If you select “Auto” for “Side Mask” (page 38), the selection

for “Drive Mode” becomes ineffective.

Adjusting image positions

Adjust the horizontal and vertical positions of images on the

Plasma Display.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Position” ( / then ENTER).

4 Select “H/V Position Adjust” ( / then ENTER).

5 Adjust the vertical position ( / ) or the horizontal

position ( / ).

6 Press HOME MENU to exit the menu.

NOTE

• To restore the factory defaults for all items, press / to

select “Reset” in step 4, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and

then press ENTER.

• Adjustments are stored separately according to input

source.

Selecting an input signal type

After connecting to the INPUT 1, INPUT 2, or INPUT 3 terminal,

specify the type of video signals to be received from the

connected equipment. For the type of the signals, see the

operation manual that came with the connected equipment.

Before starting the menu, press INPUT 1, INPUT 2, or INPUT 3

on the remote control unit or press INPUT on the Media

Receiver to select an input source.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Input Select” ( / then ENTER).

4 Select a signal type ( / then ENTER).

• For INPUT1, you can select Video or RGB.

• For INPUT2, you can select Video or S-Video or

COMPONENT.

• For INPUT3, you can select Video, S-Video, or RGB.

5 Press HOME MENU to exit the menu.

NOTE

• If no image appears or images appear in inappropriate

colours, specify another video signal type.

• For the signal types to be specified, check the operation

manual that came with the connected equipment.

Colour system setting

If an image does not appear clearly, select another colour

system (e.g., PAL, NTSC).

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “Colour System” ( / then ENTER).

4 Select a video signal system ( / then ENTER).

• You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or

“4.43NTSC”.

• With “Auto” selected, input signals are automatically

identified.

5 Press HOME MENU to exit the menu.

NOTE

• The factory default is “Auto”.

• You need to perform colour system setting for each of INPUT

1 to 4.

• For the colour system setting, see steps 11 and 12 under

“Using Manual Adjust” (page 28).

Drive Mode

75Hz

100Hz

Position

H/V Position Adjust

Reset

Input Select

Video

S-Video

RGB

COMPONENT

Colour System

Auto

PAL

SECAM

NTSC

4.43NTSC

PDP-506FDE.book Page 36 Wednesday, June 29, 2005 4:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer 506 fde Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer 506 fde

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info