Bedienungsanleitung Pioneer SE-MJ553BT (Seite 4 von 9) (Englisch)

705898

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

4. Pairing

Pairing must be performed before the headphones can be used to listen to music

or communicate using a Bluetooth device.

For further details regarding the pairing procedure, consult the user’s manual for

your Bluetooth device.

(1) While the power of the unit is off, hold down the ( ) button until the

unit enters pairing mode.

• The pairing mode is confirmed by the LED indicator’s alternately flashing blue

and red.

Release the (

) button after confirming that the LED indicator is alternately

lighting blue and red.

• When in the pairing mode, if pairing is not completed within about 5 minutes,

the power will automatically turn off.

(2) Turn on the power to the Bluetooth device you wish to pair with, and

begin pairing; search for this unit (wireless headphones) from the paired

Bluetooth device.

• Set the Bluetooth device close (within one meter) to the wireless headphones.

• These wireless headphones will appear in the Bluetooth device’s display as

“SE-MJ553BT”.

(3) Conrm that pairing has been successfully completed with the Bluetooth

device.

• Look at the display for the Bluetooth-enabled device and select “SE-MJ553BT”.

• When the LED lamp is flashing in blue slowly about once every 3 seconds, pair-

ing is complete. When it is flashing quickly about once every second, pairing is

not complete.

• The PIN code for these wireless headphones has been factory set at “0000”.

Input this code if requested by the Bluetooth device.

Connect to the Bluetooth device

• Confirm that the power to the wireless headphones is ON before connecting to

the Bluetooth device.

• Depending on the device, connection between the wireless headphones and

Bluetooth device may be effected automatically after pairing.

Disconnecting from the Bluetooth device

• Hold down the ( ) button until the flashing LED lamp turns off and the power of

the device turns off.

Note

• Depending on the device connected, the A2DP profile may need to be des-

ignated when playing music, and the HFP or HSP profiles for hands-free

communication.

• For details regarding operating and setting methods, consult the user’s manual

for the Bluetooth device.

• When a connection with the device becomes no longer possible, perform paring

again.

• These wireless headphones can record pairing information for up to 8 Bluetooth

devices. If pairing is performed for a ninth device, the information for the first

paired device will be overwritten and lost. If you wish to reconnect to that device

on a subsequent occasions, it will be necessary to repeat pairing with that

device.

• Whenever using a device with which pairing has been performed, first turn on

the power to the wireless headphones, then perform the connection operation

for the paired Bluetooth device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer SE-MJ553BT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer SE-MJ553BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info